Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
brass vs bronze for making a punch
What if any differences might I notice when making and more importantly
using a 1/4" punch made of C360 brass vs C932 bearing bronze? The brass will work harden, but I can only guess bearing material is not supposed to harden up under use. The punch would be just that- 1/4" x 4", tapered and knurled and used for driving out stuck pins. I figure it's easy enough to make and will be useful. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Brass / Bronze / Pivot Pin | Metalworking | |||
stripping nickel from brass/bronze? | Metalworking | |||
Looking to ID brass or bronze alloy | Metalworking | |||
Info wtd: Brass or Bronze | Metalworking | |||
Brass or bronze??? | Metalworking |