Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Ping Larry:
Ive got a BIG...Makita hammer drill. Uses hex drive shanked bits..slightly larger than the older Milwaukee hex shank bits. Want it? It uses hex shank bits...I may..may have (1) of that type http://www.ebay.com/itm/Concert-Dril...-/390965829703 I think the shank is 13mm. Its bigger than my old Milwaukee hex shank bits. Does come with what looks like a new 2" cup bit and a long extension. No..you are not getting my spline drive demo hammer drill. Want a picture..I can shoot one quick like and put it up on the Picasa site. Ill be leaving in the morning for LA, but will be back Friday nite, plenty of time to keep finding Stuff. Gunner, collecting stuff for a Monday rondevious/ |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Ping Larry:
On Mon, 27 Jul 2015 21:43:41 -0700, Gunner Asch
wrote: Ive got a BIG...Makita hammer drill. Uses hex drive shanked bits..slightly larger than the older Milwaukee hex shank bits. Want it? It uses hex shank bits...I may..may have (1) of that type http://www.ebay.com/itm/Concert-Dril...-/390965829703 I think the shank is 13mm. Its bigger than my old Milwaukee hex shank bits. Does come with what looks like a new 2" cup bit and a long extension. No..you are not getting my spline drive demo hammer drill. Want a picture..I can shoot one quick like and put it up on the Picasa site. Ill be leaving in the morning for LA, but will be back Friday nite, plenty of time to keep finding Stuff. Gunner, collecting stuff for a Monday rondevious/ Its a model MA-2714 and has one core bit and extension and what looks like a 1" bit Looks like this one..but nicer http://www.listlux.com/newyork/a,41,...amford-ct-.htm Gunner |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Ping Larry:
On Mon, 27 Jul 2015 22:03:03 -0700, Gunner Asch
wrote: On Mon, 27 Jul 2015 21:43:41 -0700, Gunner Asch wrote: Ive got a BIG...Makita hammer drill. Uses hex drive shanked bits..slightly larger than the older Milwaukee hex shank bits. Want it? It uses hex shank bits...I may..may have (1) of that type http://www.ebay.com/itm/Concert-Dril...-/390965829703 I think the shank is 13mm. Its bigger than my old Milwaukee hex shank bits. Does come with what looks like a new 2" cup bit and a long extension. No..you are not getting my spline drive demo hammer drill. Oh, I thought that was first offered. My mistake. What I've been looking for is a small to medium sized demo hammer to break up concrete fence post bases. But since I'm retiring from the larger jobs, I don't really need one as much any more. If the Makita is a freebie, by all means bring it. Want a picture..I can shoot one quick like and put it up on the Picasa site. Ill be leaving in the morning for LA, but will be back Friday nite, plenty of time to keep finding Stuff. So you did get my email. I was wondering. Ya never call, ya never write. g -- My desire to be well-informed is currently at odds with my desire to remain sane. --Sipkess |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Ping Larry:
On Tue, 28 Jul 2015 07:21:05 -0700, Larry Jaques
wrote: On Mon, 27 Jul 2015 22:03:03 -0700, Gunner Asch wrote: On Mon, 27 Jul 2015 21:43:41 -0700, Gunner Asch wrote: Ive got a BIG...Makita hammer drill. Uses hex drive shanked bits..slightly larger than the older Milwaukee hex shank bits. Want it? It uses hex shank bits...I may..may have (1) of that type http://www.ebay.com/itm/Concert-Dril...-/390965829703 I think the shank is 13mm. Its bigger than my old Milwaukee hex shank bits. Does come with what looks like a new 2" cup bit and a long extension. No..you are not getting my spline drive demo hammer drill. Oh, I thought that was first offered. My mistake. What I've been looking for is a small to medium sized demo hammer to break up concrete fence post bases. But since I'm retiring from the larger jobs, I don't really need one as much any more. If the Makita is a freebie, by all means bring it. Nope..Im not sure what was first offered. I have the following: Milwaukee Hex shank rotary hammer drill http://www.ebay.com/itm/Milwaukee-Ro...-/171867635839 Skil Hex shank rotary hammer drill https://s-media-cache-ak0.pinimg.com...4799dc9919.jpg (Both it and the Milwaukee use the same hex shank drill bits and I have them up to 36" long Makita spline drive rotary hammer drill http://www.ebay.com/itm/MAKITA-HR385...-/111717660048 Makita hex drive rotary hammer drill which looks very similar to the above drill, but uses a slightly larger hex shanked bit than does the Milwaukee/Skil drills. I also have a small Dewalt hammer drill in a case, that doesnt work (think the switch is bad) http://www.ebay.com/itm/DEWALT-DW510...L-/12171417046 and my beloved Hilti Te 5 http://www.ebay.com/itm/HILTI-TE-5-R...-/181723003289 The Hilti is the only rotary hammer that I own that is actually SDS shanked. If you want to take the Dewalt into a service center..Ill give you the drill. Id be more than willing to give you the Skil as well, but I cant let go very many bits...its a shank I use a lot with the Milwaukee. Humm..the Dewalt may be SDS shanked as well, come to think of it. It looks nearly new. Shrug. I could probably get by with just the Hilti (which lives in my service truck) , the Milwaukee and the Makita spline drive I dont know which would be easier to find bits for..the Skil or the Makita hex drive. Your choice. Ill toss in the Dewalt as well. I buy my bits at swap meets and on Ebay. Both have hammer only/turn and hammer switches No idea if I have any chisels though..Ill make a note and look. Id swear I had a Star Bit demolition hammer..didnt turn..just hammered hard, with an assortment of star bits. Ill see if I can find em. Woda sworn it was a B&D Industrial...Ill start digging when I get back. http://www.ebay.com/itm/BLACK-AND-DE...-/221836753943 Want a picture..I can shoot one quick like and put it up on the Picasa site. Ill be leaving in the morning for LA, but will be back Friday nite, plenty of time to keep finding Stuff. So you did get my email. I was wondering. Ya never call, ya never write. g Ayup..being on the road..I get a backlog of emails and have to spend some time looking through them. Gunner |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
Ping Larry:
On Tue, 28 Jul 2015 10:03:40 -0700, Gunner Asch
wrote: ooopps http://www.ebay.com/itm/DEWALT-DW510...-/121714170461 |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
Ping Larry:
On Tue, 28 Jul 2015 10:03:40 -0700, Gunner Asch
wrote: On Tue, 28 Jul 2015 07:21:05 -0700, Larry Jaques wrote: On Mon, 27 Jul 2015 22:03:03 -0700, Gunner Asch wrote: On Mon, 27 Jul 2015 21:43:41 -0700, Gunner Asch wrote: Ive got a BIG...Makita hammer drill. Uses hex drive shanked bits..slightly larger than the older Milwaukee hex shank bits. Want it? It uses hex shank bits...I may..may have (1) of that type http://www.ebay.com/itm/Concert-Dril...-/390965829703 I think the shank is 13mm. Its bigger than my old Milwaukee hex shank bits. Does come with what looks like a new 2" cup bit and a long extension. No..you are not getting my spline drive demo hammer drill. Oh, I thought that was first offered. My mistake. What I've been looking for is a small to medium sized demo hammer to break up concrete fence post bases. But since I'm retiring from the larger jobs, I don't really need one as much any more. If the Makita is a freebie, by all means bring it. Nope..Im not sure what was first offered. I have the following: Whatever it was, it was a spline drive and had a metal box, IIRC through the fog of sinus death. Milwaukee Hex shank rotary hammer drill http://www.ebay.com/itm/Milwaukee-Ro...-/171867635839 Skil Hex shank rotary hammer drill https://s-media-cache-ak0.pinimg.com...4799dc9919.jpg (Both it and the Milwaukee use the same hex shank drill bits and I have them up to 36" long Makita spline drive rotary hammer drill http://www.ebay.com/itm/MAKITA-HR385...-/111717660048 Makita hex drive rotary hammer drill which looks very similar to the above drill, but uses a slightly larger hex shanked bit than does the Milwaukee/Skil drills. I also have a small Dewalt hammer drill in a case, that doesnt work (think the switch is bad) http://www.ebay.com/itm/DEWALT-DW510...L-/12171417046 and my beloved Hilti Te 5 http://www.ebay.com/itm/HILTI-TE-5-R...-/181723003289 The Hilti is the only rotary hammer that I own that is actually SDS shanked. If you want to take the Dewalt into a service center..Ill give you the drill. Id be more than willing to give you the Skil as well, but I cant let go very many bits...its a shank I use a lot with the Milwaukee. Humm..the Dewalt may be SDS shanked as well, come to think of it. It looks nearly new. Shrug. I could probably get by with just the Hilti (which lives in my service truck) , the Milwaukee and the Makita spline drive I dont know which would be easier to find bits for..the Skil or the Makita hex drive. Your choice. Ill toss in the Dewalt as well. I buy my bits at swap meets and on Ebay. Yeah, that's the style I've been looking at in HF catalogs. Whichever one works best, OK? I should be able to buy a switch for the Dewally, too, I would think. Danke mucho, monsewer. Both have hammer only/turn and hammer switches That's what I'd like to find! No idea if I have any chisels though..Ill make a note and look. Excellent. I wonder if HF has any bits whot'd fit. http://tinyurl.com/q4lbwap Y'think? Id swear I had a Star Bit demolition hammer..didnt turn..just hammered hard, with an assortment of star bits. Ill see if I can find em. Woda sworn it was a B&D Industrial...Ill start digging when I get back. http://www.ebay.com/itm/BLACK-AND-DE...-/221836753943 That doesn't look like it, but I do remember the word "star" from that day for some reason. I didn't see any bits in the box and it looked like it would be a dinosaur tooth to find, but the box didn't make it home with me. So you did get my email. I was wondering. Ya never call, ya never write. g Ayup..being on the road..I get a backlog of emails and have to spend some time looking through them. I figured as much. -- My desire to be well-informed is currently at odds with my desire to remain sane. --Sipkess |
#7
Posted to rec.crafts.metalworking
|
|||
|
|||
Ping Larry:
On Tue, 28 Jul 2015 10:21:38 -0700, Gunner Asch
wrote: On Tue, 28 Jul 2015 10:03:40 -0700, Gunner Asch wrote: ooopps http://www.ebay.com/itm/DEWALT-DW510...-/121714170461 I have the HF equivalent of that one, and damnear smoked it the first day. It has kept going for the past year+, though. It doesn't have the capability of hammer only, though. Only straight drill and hammer drill, both rotational. -- My desire to be well-informed is currently at odds with my desire to remain sane. --Sipkess |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Ping - Larry Jaques | Woodworking | |||
[Way OT] Ping Larry | Metalworking | |||
Ping Larry Jaques | Woodworking | |||
Ping Larry Jacquesoff | Metalworking | |||
Ping Larry Blanchard | Woodworking |