Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
long, bent, tapered tube -- how to?
I must make a very smooth, cosmetically impeccible brass tube that tapers
uniformly from 1" i.d. to 5/8" i.d. over a length of about 16". Lack of a visible seam would be a plus. It must be bent in three non-planar curves, none exceeding 45 degrees of bend. Anybody got any favorite methods? Thanks, Lloyd |
Thread Tools | Search this Thread |
Display Modes | |
|
|