Home |
Search |
Today's Posts |
![]() |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
I have a bucket of parts washer solvent from Menards. This stuff REEKS
and smells really horribly, much worse than diesel fuel even. I wonder if all solvents are like that, or there are some that are a little better. THanks i |
#2
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On Sun, 16 Oct 2011 09:30:13 -0500, Ignoramus23036
wrote: I have a bucket of parts washer solvent from Menards. This stuff REEKS and smells really horribly, much worse than diesel fuel even. I wonder if all solvents are like that, or there are some that are a little better. THanks i I like the smell of Hoppe's number nine gun cleaner. http://www.hoppes.com/ Might even give me a woody if Milady wore it to bed. (NOT going to happen) Karl |
#3
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On 2011-10-16, Karl Townsend wrote:
On Sun, 16 Oct 2011 09:30:13 -0500, Ignoramus23036 wrote: I have a bucket of parts washer solvent from Menards. This stuff REEKS and smells really horribly, much worse than diesel fuel even. I wonder if all solvents are like that, or there are some that are a little better. THanks i I like the smell of Hoppe's number nine gun cleaner. http://www.hoppes.com/ Might even give me a woody if Milady wore it to bed. (NOT going to happen) But I need parts washer solvent, something like 40 gallons of it! |
#4
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On Sun, 16 Oct 2011 09:49:05 -0500, Ignoramus23036
wrote: On 2011-10-16, Karl Townsend wrote: On Sun, 16 Oct 2011 09:30:13 -0500, Ignoramus23036 wrote: I have a bucket of parts washer solvent from Menards. This stuff REEKS and smells really horribly, much worse than diesel fuel even. I wonder if all solvents are like that, or there are some that are a little better. THanks i I like the smell of Hoppe's number nine gun cleaner. http://www.hoppes.com/ Might even give me a woody if Milady wore it to bed. (NOT going to happen) But I need parts washer solvent, something like 40 gallons of it! Well, you asked for good smelling, not cheap. I see its only $20 a quart. For cheap, I use a variation of Ed's red. Mostly diesel, mineral spirts, ATF (used OK), and a bit of acetone. Google for a recipe, don't have to follow it exactly. The smell is strong. But you might be able to get a 55 gal drum of parts cleaner at about the same price if you pick up at the distributor. You have learned to buy at wholesale, haven't you? Karl |
#5
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On 2011-10-16, Karl Townsend wrote:
On Sun, 16 Oct 2011 09:49:05 -0500, Ignoramus23036 wrote: On 2011-10-16, Karl Townsend wrote: On Sun, 16 Oct 2011 09:30:13 -0500, Ignoramus23036 wrote: I have a bucket of parts washer solvent from Menards. This stuff REEKS and smells really horribly, much worse than diesel fuel even. I wonder if all solvents are like that, or there are some that are a little better. THanks i I like the smell of Hoppe's number nine gun cleaner. http://www.hoppes.com/ Might even give me a woody if Milady wore it to bed. (NOT going to happen) But I need parts washer solvent, something like 40 gallons of it! Well, you asked for good smelling, not cheap. I see its only $20 a quart. For cheap, I use a variation of Ed's red. Mostly diesel, mineral spirts, ATF (used OK), and a bit of acetone. Google for a recipe, don't have to follow it exactly. The smell is strong. But you might be able to get a 55 gal drum of parts cleaner at about the same price if you pick up at the distributor. You have learned to buy at wholesale, haven't you? Isn't acetone very flammable? i |
#6
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
In article ,
Ignoramus23036 wrote: I have a bucket of parts washer solvent from Menards. This stuff REEKS and smells really horribly, much worse than diesel fuel even. I wonder if all solvents are like that, or there are some that are a little better. You can certainly get deodorized (or low odor, or what have you) mineral sprits. It will likely cost more than the stinky stuff. The particular stuff I'm most familiar with in that line will cost a lot more as it's an "art supply", but there are likely cheaper sources. The jug of mineral sprits I have from the hardware store stinks like a whole tank of heating oil, by contrast. The better grades of kerosene (ie, that would not stink up Mrs. O'Leary's barn while burning in that lantern that wasn't really the casue...) might be a cheaper place to start, but I suppose that's perhaps more flammable than "mineral sprits." Perhaps your parts washer needs a hood and vent. -- Cats, coffee, chocolate...vices to live by Please don't feed the trolls. Killfile and ignore them so they will go away. |
#7
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On Sun, 16 Oct 2011 09:30:13 -0500, Ignoramus23036
wrote: I have a bucket of parts washer solvent from Menards. This stuff REEKS and smells really horribly, much worse than diesel fuel even. I wonder if all solvents are like that, or there are some that are a little better. THanks i Parts washer solvent doesn't have to smell bad. You can buy deodorized mineral spirits. At least I used to buy it from a couple places in Seattle. I asked for Stoddard solvent and was told it was just deodorized mineral spirits. The stuff certainly smelled better than paint thinner. Eric |
#8
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On Sun, 16 Oct 2011 09:59:45 -0500, Ignoramus23036
wrote: On 2011-10-16, Karl Townsend wrote: On Sun, 16 Oct 2011 09:49:05 -0500, Ignoramus23036 wrote: On 2011-10-16, Karl Townsend wrote: On Sun, 16 Oct 2011 09:30:13 -0500, Ignoramus23036 wrote: I have a bucket of parts washer solvent from Menards. This stuff REEKS and smells really horribly, much worse than diesel fuel even. I wonder if all solvents are like that, or there are some that are a little better. THanks i I like the smell of Hoppe's number nine gun cleaner. http://www.hoppes.com/ Might even give me a woody if Milady wore it to bed. (NOT going to happen) But I need parts washer solvent, something like 40 gallons of it! Well, you asked for good smelling, not cheap. I see its only $20 a quart. For cheap, I use a variation of Ed's red. Mostly diesel, mineral spirts, ATF (used OK), and a bit of acetone. Google for a recipe, don't have to follow it exactly. The smell is strong. But you might be able to get a 55 gal drum of parts cleaner at about the same price if you pick up at the distributor. You have learned to buy at wholesale, haven't you? Isn't acetone very flammable? i IIRC, its like 1% of the total, shouldn't make a step change in flamablility. Or just leave it out. The mineral spirits and diesel do all the main work. Like others have said, sub perfumeded kerosene and stoddard solvent (WD40) if you want better smell. Karl |
#9
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On Sun, 16 Oct 2011 12:09:40 -0400, Ecnerwal
wrote: In article , Ignoramus23036 wrote: I have a bucket of parts washer solvent from Menards. This stuff REEKS and smells really horribly, much worse than diesel fuel even. I wonder if all solvents are like that, or there are some that are a little better. You can certainly get deodorized (or low odor, or what have you) mineral sprits. It will likely cost more than the stinky stuff. The particular stuff I'm most familiar with in that line will cost a lot more as it's an "art supply", but there are likely cheaper sources. The jug of mineral sprits I have from the hardware store stinks like a whole tank of heating oil, by contrast. The better grades of kerosene (ie, that would not stink up Mrs. O'Leary's barn while burning in that lantern that wasn't really the casue...) might be a cheaper place to start, but I suppose that's perhaps more flammable than "mineral sprits." Perhaps your parts washer needs a hood and vent. I have this.... http://s-kstore.com/index.php/recycl...model-251.html Does anyone have any instructions for its operation and maintainence? SafteyKleen has been less than forthcoming with any guides or manuals..... Gunner "In the history of mankind, there have always been men and women who's goal in life is to take down nations. We have just elected such a man to run our country." - David Lloyyd (2008) |
#10
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On 2011-10-16, Ecnerwal wrote:
In article , Ignoramus23036 wrote: I have a bucket of parts washer solvent from Menards. This stuff REEKS and smells really horribly, much worse than diesel fuel even. I wonder if all solvents are like that, or there are some that are a little better. You can certainly get deodorized (or low odor, or what have you) mineral sprits. It will likely cost more than the stinky stuff. The particular stuff I'm most familiar with in that line will cost a lot more as it's an "art supply", but there are likely cheaper sources. The jug of mineral sprits I have from the hardware store stinks like a whole tank of heating oil, by contrast. The better grades of kerosene (ie, that would not stink up Mrs. O'Leary's barn while burning in that lantern that wasn't really the casue...) might be a cheaper place to start, but I suppose that's perhaps more flammable than "mineral sprits." Perhaps your parts washer needs a hood and vent. I bought some deodorized mineral spirits once, they stink just as badly. i |
#11
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On Sun, 16 Oct 2011 18:54:57 -0500, Ignoramus23036
wrote: On 2011-10-16, Ecnerwal wrote: In article , Ignoramus23036 wrote: I have a bucket of parts washer solvent from Menards. This stuff REEKS and smells really horribly, much worse than diesel fuel even. I wonder if all solvents are like that, or there are some that are a little better. You can certainly get deodorized (or low odor, or what have you) mineral sprits. It will likely cost more than the stinky stuff. The particular stuff I'm most familiar with in that line will cost a lot more as it's an "art supply", but there are likely cheaper sources. The jug of mineral sprits I have from the hardware store stinks like a whole tank of heating oil, by contrast. The better grades of kerosene (ie, that would not stink up Mrs. O'Leary's barn while burning in that lantern that wasn't really the casue...) might be a cheaper place to start, but I suppose that's perhaps more flammable than "mineral sprits." Perhaps your parts washer needs a hood and vent. I bought some deodorized mineral spirits once, they stink just as badly. Then someone mismarked the can. I bought some for oil painting ($14 a freakin' quart!) and it was damnear odorless. Very nice. The cans marked "Low Odor" are better, but the odorless is a much nicer beast for indoor use. -- ....in order that a man may be happy, it is necessary that he should not only be capable of his work, but a good judge of his work. -- John Ruskin |
#12
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
Gunner Asch wrote:
I have this.... http://s-kstore.com/index.php/recycl...model-251.html Does anyone have any instructions for its operation and maintainence? SafteyKleen has been less than forthcoming with any guides or manuals..... Gunner "In the history of mankind, there have always been men and women who's goal in life is to take down nations. We have just elected such a man to run our country." - David Lloyyd (2008) That a recycler unit. You need to use the Safety Kleen solvent in it. It cleans the solvent by heating it to the point where it becomes vapor, The dirt/oil will drop out of the vapor and go through the condenser unit to be re-used. There should be a separator screew filer as well that keeps any big chunks from getting into the pump assy. They work great with the correct solvent BUT due to the way they operate , using any flammable stuff like acetone/gas/thinner will make you wish you didn't. Think blevy bomb.... -- Steve W. |
#13
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On Sun, 16 Oct 2011 17:05:15 -0700, Larry Jaques
wrote: On Sun, 16 Oct 2011 18:54:57 -0500, Ignoramus23036 wrote: On 2011-10-16, Ecnerwal wrote: In article , Ignoramus23036 wrote: I have a bucket of parts washer solvent from Menards. This stuff REEKS and smells really horribly, much worse than diesel fuel even. I wonder if all solvents are like that, or there are some that are a little better. You can certainly get deodorized (or low odor, or what have you) mineral sprits. It will likely cost more than the stinky stuff. The particular stuff I'm most familiar with in that line will cost a lot more as it's an "art supply", but there are likely cheaper sources. The jug of mineral sprits I have from the hardware store stinks like a whole tank of heating oil, by contrast. The better grades of kerosene (ie, that would not stink up Mrs. O'Leary's barn while burning in that lantern that wasn't really the casue...) might be a cheaper place to start, but I suppose that's perhaps more flammable than "mineral sprits." Perhaps your parts washer needs a hood and vent. I bought some deodorized mineral spirits once, they stink just as badly. Then someone mismarked the can. I bought some for oil painting ($14 a freakin' quart!) and it was damnear odorless. Very nice. The cans marked "Low Odor" are better, but the odorless is a much nicer beast for indoor use. Yeah. I bought a jug of "kerosene" a couple years ago and it was dyed pink. And smelled bad. In reality it was just fuel oil, dyed pink so people don't use it for highway use and avoid taxes. But the plastic jug said kerosene, not fuel oil. Eric |
#14
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On Sun, 16 Oct 2011 21:57:40 -0400, "Steve W."
wrote: Gunner Asch wrote: I have this.... http://s-kstore.com/index.php/recycl...model-251.html Does anyone have any instructions for its operation and maintainence? SafteyKleen has been less than forthcoming with any guides or manuals..... Gunner "In the history of mankind, there have always been men and women who's goal in life is to take down nations. We have just elected such a man to run our country." - David Lloyyd (2008) That a recycler unit. You need to use the Safety Kleen solvent in it. It cleans the solvent by heating it to the point where it becomes vapor, The dirt/oil will drop out of the vapor and go through the condenser unit to be re-used. There should be a separator screew filer as well that keeps any big chunks from getting into the pump assy. They work great with the correct solvent BUT due to the way they operate , using any flammable stuff like acetone/gas/thinner will make you wish you didn't. Think blevy bomb.... Ah! I dont think mine gets hot. It used to, but it stopped last winter..I think. Im trying to find some documentation so I can check the thing out. Gunner "In the history of mankind, there have always been men and women who's goal in life is to take down nations. We have just elected such a man to run our country." - David Lloyyd (2008) |
#15
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On Oct 16, 4:30*am, Ignoramus23036 ignoramus23...@NOSPAM.
23036.invalid wrote: I have a bucket of parts washer solvent from Menards. This stuff REEKS and smells really horribly, much worse than diesel fuel even. I wonder if all solvents are like that, or there are some that are a little better. THanks i Goss's Garage on Motor Week yesterday. Parts washing. http://www.motorweek.org/features/go...parts_cleaning No Boom!! solvents. Karl |
#16
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On 10/17/2011 12:06 AM, Karl Townsend wrote:
On Sun, 16 Oct 2011 09:30:13 -0500, Ignoramus23036 wrote: I have a bucket of parts washer solvent from Menards. This stuff REEKS and smells really horribly, much worse than diesel fuel even. I wonder if all solvents are like that, or there are some that are a little better. THanks i I like the smell of Hoppe's number nine gun cleaner. http://www.hoppes.com/ Might even give me a woody if Milady wore it to bed. (NOT going to happen) Karl A friend of mine told recently that there is a mens under arm deoderant called Hoppes No 9 ,it smells just like the barrel cleaner -- Kevin (Bluey) "I'm not young enough to know everything." |
#17
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On Tue, 25 Oct 2011 19:58:12 +0930, "Kevin(Bluey)"
wrote: I like the smell of Hoppe's number nine gun cleaner. http://www.hoppes.com/ Might even give me a woody if Milady wore it to bed. (NOT going to happen) Karl A friend of mine told recently that there is a mens under arm deoderant called Hoppes No 9 ,it smells just like the barrel cleaner Years ago, I hung out in a mixed company cop bar..and did indeed spritz a few drops of Hoppes on my jacket before going out to it. The groupie chicks and a surprising number of lady cops wound up in my bed as a result. Sigh..the good old days...sniff.... Gunner One could not be a successful Leftwinger without realizing that, in contrast to the popular conception supported by newspapers and mothers of Leftwingers, a goodly number of Leftwingers are not only narrow-minded and dull, but also just stupid. Gunner Asch |
#18
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]() "Gunner Asch" wrote in message ... On Tue, 25 Oct 2011 19:58:12 +0930, "Kevin(Bluey)" wrote: I like the smell of Hoppe's number nine gun cleaner. http://www.hoppes.com/ Might even give me a woody if Milady wore it to bed. (NOT going to happen) Karl A friend of mine told recently that there is a mens under arm deoderant called Hoppes No 9 ,it smells just like the barrel cleaner Years ago, I hung out in a mixed company cop bar..and did indeed spritz a few drops of Hoppes on my jacket before going out to it. The groupie chicks and a surprising number of lady cops wound up in my bed as a result. Sigh..the good old days...sniff.... Gunner Imagine Gunner's surprise when they grabbed a bronze bristle brush and told him to bend over. -- Ed Huntress |
#19
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]() Ed Huntress wrote: Imagine Gunner's surprise when they grabbed a bronze bristle brush and told him to bend over. Yawn. More of your perverted fantasies. -- You can't have a sense of humor, if you have no sense. |
#20
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
On Oct 16, 10:30*am, Ignoramus23036 ignoramus23...@NOSPAM.
23036.invalid wrote: I have a bucket of parts washer solvent from Menards. This stuff REEKS and smells really horribly, much worse than diesel fuel even. I wonder if all solvents are like that, or there are some that are a little better. THanks i Smells bad in what way? Like bad chemical smell or like bad rancid putrid smell? If it's the latter then dump it or get a biocide to treat it. |
#21
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
Ignoramus23036 wrote:
I have a bucket of parts washer solvent from Menards. This stuff REEKS and smells really horribly, much worse than diesel fuel even. I wonder if all solvents are like that, or there are some that are a little better. THanks i http://sun-cleaning.com/ind_deg.html |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Petroleum vs Aqueous Parts Washing Fluid and RUST! | Metalworking | |||
Calypso washer makes clothes smell..... | Home Repair | |||
GE Washer - Squealing and burning rubber smell | Home Repair | |||
Petroleum odors? ? ? | Home Repair |