Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Home made Torx T-9 insturment
Recently dropped a FRS walkie talkie, which now transmits
but without any TX audio. I'm curious what's inside. The Harbor Freight security bit set has T8 and T10. And as Goldilocks said about the porridge, one is too small and one is too large. Torx sets are about $5 or less on Ebay, with the obligatory 2 week wait from Hong Kong. With a small allen wrench, and some time on the bench grinder, I was able to make an oddly shaped tip, which was supposed to be smaller allen wrench tip. Didn't work out as well as I'd hoped. But, it did remove the necessary screws. I also opened up a nonworking set I got off Ebay, which had corroded alkaline batteries. The contacts were beyond repair, or at least beyond my own abilities. -- Christopher A. Young Learn more about Jesus www.lds.org .. |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Home made Torx T-9 insturment
Stormin Mormon wrote: Recently dropped a FRS walkie talkie, which now transmits but without any TX audio. I'm curious what's inside. The Harbor Freight security bit set has T8 and T10. And as Goldilocks said about the porridge, one is too small and one is too large. You bought the wrong set. They sell a set of six small 'star' bits that includes T-9. It's not always available, but I bought two sets the last time I saw them. I don't have the stock number handy, since all my tool notes were on that Seagate drive that died. So far, I've recovered about 32 GB of files between the failed hard drive and the corrupted backups. There is at least another 20 GB that I haven't been able to recover. I bought a hand full of Torx bits at a flea market about 10 years ago that were mounted in uncut round ACE keys so you could carry them on a key ring, I still have a few T-7, T-8 and T-9 left. They had about 25 pounds, but they were too expensive to buy all of them. -- You can't have a sense of humor, if you have no sense. |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Home made Torx T-9 insturment
In article , cayoung61
says... Recently dropped a FRS walkie talkie, which now transmits but without any TX audio. I'm curious what's inside. The Harbor Freight security bit set has T8 and T10. And as Goldilocks said about the porridge, one is too small and one is too large. Torx sets are about $5 or less on Ebay, with the obligatory 2 week wait from Hong Kong. With a small allen wrench, and some time on the bench grinder, I was able to make an oddly shaped tip, which was supposed to be smaller allen wrench tip. Didn't work out as well as I'd hoped. But, it did remove the necessary screws. I also opened up a nonworking set I got off Ebay, which had corroded alkaline batteries. The contacts were beyond repair, or at least beyond my own abilities. Glad you got it open, but for future reference, Harbor Fright has three sets, an orange one, a yellow one, and a red one. The orange one with the green-and-black handle, flex shaft, and magnifier is the only one with T9, as well as small metric allens and some others. The yellow one with the orange and black handle and the tweezers has small SAE allens but no small metric. It also has some weirdies like the 5-pointer that you need to get some Sony stuff open. Both the yellow and the orange are small sizes. The red set 100 piece set with no handle has the larger sizes--it overlaps the other two a little bit. |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Home made Torx T-9 insturment
On Sep 3, 6:51*pm, "J. Clarke" wrote:
In article , cayoung61 says... Recently dropped a FRS walkie talkie, which now transmits but without any TX audio. I'm curious what's inside. The Harbor Freight security bit set has T8 and T10. And as Goldilocks said about the porridge, one is too small and one is too large. Torx sets are about $5 or less on Ebay, with the obligatory 2 week wait from Hong Kong. With a small allen wrench, and some time on the bench grinder, I was able to make an oddly shaped tip, which was supposed to be smaller allen wrench tip. Didn't work out as well as I'd hoped. But, it did remove the necessary screws. I also opened up a nonworking set I got off Ebay, which had corroded alkaline batteries. The contacts were beyond repair, or at least beyond my own abilities. Glad you got it open, but for future reference, Harbor Fright has three sets, an orange one, a yellow one, and a red one. The orange one with the green-and-black handle, flex shaft, and magnifier is the only one with T9, as well as small metric allens and some others. The yellow one with the orange and black handle and the tweezers has small SAE allens but no small metric. *It also has some weirdies like the 5-pointer that you need to get some Sony stuff open. Both the yellow and the orange are small sizes. *The red set 100 piece set with no handle has the larger sizes--it overlaps the other two a little bit.- Hide quoted text - - Show quoted text - This explains why I've never felt the need for a set of small Torx, I bought the orange set when it first came out and at half off. Has met the need for opening up cases for several years now. Only problem is that the plastic case hinges gave out, it's got a rubber band latch now. I did have to order a T1 one time to get into an IBM Thinkpad. Nobody local carried anything that small, T5 was it. Stan |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
Home made Torx T-9 insturment
"Michael A. Terrell" wrote: Stormin Mormon wrote: Recently dropped a FRS walkie talkie, which now transmits but without any TX audio. I'm curious what's inside. The Harbor Freight security bit set has T8 and T10. And as Goldilocks said about the porridge, one is too small and one is too large. You bought the wrong set. They sell a set of six small 'star' bits that includes T-9. It's not always available, but I bought two sets the last time I saw them. I dug out the spare HF set, #93316. It has T-5, T-5.5, T-6, T-7, T-8 & T-9. -- You can't have a sense of humor, if you have no sense. |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
Home made Torx T-9 insturment
"J. Clarke" wrote: In article , cayoung61 says... Recently dropped a FRS walkie talkie, which now transmits but without any TX audio. I'm curious what's inside. The Harbor Freight security bit set has T8 and T10. And as Goldilocks said about the porridge, one is too small and one is too large. Torx sets are about $5 or less on Ebay, with the obligatory 2 week wait from Hong Kong. With a small allen wrench, and some time on the bench grinder, I was able to make an oddly shaped tip, which was supposed to be smaller allen wrench tip. Didn't work out as well as I'd hoped. But, it did remove the necessary screws. I also opened up a nonworking set I got off Ebay, which had corroded alkaline batteries. The contacts were beyond repair, or at least beyond my own abilities. Glad you got it open, but for future reference, Harbor Fright has three sets, an orange one, a yellow one, and a red one. The orange one with the green-and-black handle, flex shaft, and magnifier is the only one with T9, as well as small metric allens and some others. ----------- 33 Piece Precision Screwdriver Set Item # 93916 Sale price: $7.49 This precision screwdriver set has everything you need to handle small and delicate screws and fasteners. * Hardened nickel chrome molybdenum steel bits * Soft comfort-grip handle extends from 5-1/8'' to 7'' * 8'' flexible extension shaft * Organized case * Magnifier for viewing detail work Sizes: Slotted: 1.0., 1.5, 2.0, 2.5, 3.0, 3.5, 4.0 mm Phillips: #000, #00, #0, #1 Pozi: PZ0, PZ1 Torx: T4, T5,T6,T7, T8, T9, T10, T15, T20 Hex: 0.7, 0.9, 1.3, 1.5, 2.0, 2.5, 3.0, 4.0 ---------- The yellow one with the orange and black handle and the tweezers has small SAE allens but no small metric. It also has some weirdies like the 5-pointer that you need to get some Sony stuff open. ---------- 32 Piece Screwdriver Set with Tweezers Item # 97517 $7.99 Precision screwdriver set with offset tweezers can be used for a variety of projects from hobbies, automotive work and watch repair to computer and electronic repair. * Includes chrome vanadium slotted, Phillips, Torx, and hex bits * Nonslip rubber grip handle * 5/32" hex shank * Stainless steel tweezers Slotted bits (6): 1/16'', 5/64'', 3/32'', 1/8'', 9/64'', 5/32''. Phillips bits (4): PH00, PH0, PH1, and PH2. Torx bits (8): T4, T5, T6, T7, T8, T10, T15, and T20. Hex bits (7): 0.035", 0.05", 1/16", 5/64", 3/32", 1/8", and 5/32" Tri-wing bit (1) 1/8'' Triangle bit (1) 1/8'' Five-point star bit (1) 5/64'' Spanner bit (1) 7/64'' Round bit (1) 0.035'' Tweezer dimensions: 4-1/2" L x 3/8" W x 1/8" H Handle dimensions: 3-3/8" L x 7/8" diameter ---------- Both the yellow and the orange are small sizes. The red set 100 piece set with no handle has the larger sizes--it overlaps the other two a little bit. This item has it, as well: 7 Piece Tamper-Proof Torx Key Set, T5-T15 Item # 97469 $5.99 Foldable, pocket-sized set of security bits that work with Torx-style fasteners. * Hollow tips for use with tamper-proof security fasteners * Sizes:T5, T6, T7, T8, T9, T10, and T15 * S2 alloy steel construction * Polished chrome finish * Anodized aluminum handle 6 Piece Star Bit Set Item # 93316 Sale price: $2.79 Includes PVC boot bit retainer 1/4" hex shanks Sizes: T5, T5.5, T6, T7, T8, T9 Overall dimensions: 1" L x 1/4" W -- You can't have a sense of humor, if you have no sense. |
#7
Posted to rec.crafts.metalworking
|
|||
|
|||
Home made Torx T-9 insturment
On 2011-09-04, J. Clarke wrote:
In article , cayoung61 says... Recently dropped a FRS walkie talkie, which now transmits but without any TX audio. I'm curious what's inside. The Harbor Freight security bit set has T8 and T10. And as Goldilocks said about the porridge, one is too small and one is too large. [ ... ] With a small allen wrench, and some time on the bench grinder, I was able to make an oddly shaped tip, which was supposed to be smaller allen wrench tip. Didn't work out as well as I'd hoped. But, it did remove the necessary screws. O.K. A surface grinder and a small index head can work wonders on making small (or non-standard) Allen wrenches. SWMBO has a Tarus 5-shot .38 Special with the protective lock built into the hammer. It came with two "keys", which were 0.100" Security Allen wrenches with black plastic handles to go on your key ring. My ring I wear on my belt, and the plastic broke so my copy was lost, so I had to make a replacement -- with an aluminum handle so it will stay with me. I guess that a metric country would think that an imperial size in a non-standard size would be secure enough -- but it is also a pain. There is now way that I'm going to order another from them and have the same failure. :-) I also opened up a nonworking set I got off Ebay, which had corroded alkaline batteries. The contacts were beyond repair, or at least beyond my own abilities. Glad you got it open, but for future reference, Harbor Fright has three sets, an orange one, a yellow one, and a red one. The orange one with the green-and-black handle, flex shaft, and magnifier is the only one with T9, as well as small metric allens and some others. Hmm ... sounds like the set I got from MicroCenter (the computer box store), except that while the bottom half of the box is orange (the top is clear), the handle is orange and black instead. It has four rows of bits, straight, Philips, torx (including T9, but not security T9 if you need that) and Allen (they call them hex) in metric sizes. The flexible shaft looks like a lifesaver waiting for the right project, but it and the magnifier together are a pain, because the flex shaft is stored bent, and tries to pop out when you open the case, and the magnifier has to rest on top of it so the case can close, and tries to launch when the flex shaft pops straight. :-) If I need a security torx in these sizes which is not in my current collection (I think that I've got them all covered in 1/4" shank ones of better quality anyway), I can always pop it in a hex collet in the lathe and drill the "security" clearance hole. Enjoy, DoN. -- Remove oil spill source from e-mail Email: | Voice (all times): (703) 938-4564 (too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html --- Black Holes are where God is dividing by zero --- |
#8
Posted to rec.crafts.metalworking
|
|||
|
|||
Home made Torx T-9 insturment
My first on topic post, in ages.
My first reply. And, I hear that I did it wrong. I'm going to cry. -- Christopher A. Young Learn more about Jesus www.lds.org .. "Michael A. Terrell" wrote in message m... Stormin Mormon wrote: Recently dropped a FRS walkie talkie, which now transmits but without any TX audio. I'm curious what's inside. The Harbor Freight security bit set has T8 and T10. And as Goldilocks said about the porridge, one is too small and one is too large. You bought the wrong set. They sell a set of six small 'star' bits that includes T-9. It's not always available, but I bought two sets the last time I saw them. I don't have the stock number handy, since all my tool notes were on that Seagate drive that died. So far, I've recovered about 32 GB of files between the failed hard drive and the corrupted backups. There is at least another 20 GB that I haven't been able to recover. I bought a hand full of Torx bits at a flea market about 10 years ago that were mounted in uncut round ACE keys so you could carry them on a key ring, I still have a few T-7, T-8 and T-9 left. They had about 25 pounds, but they were too expensive to buy all of them. -- You can't have a sense of humor, if you have no sense. |
#9
Posted to rec.crafts.metalworking
|
|||
|
|||
Home made Torx T-9 insturment
Thanks for the real world experience.
-- Christopher A. Young Learn more about Jesus www.lds.org .. "J. Clarke" wrote in message in.local... Glad you got it open, but for future reference, Harbor Fright has three sets, an orange one, a yellow one, and a red one. The orange one with the green-and-black handle, flex shaft, and magnifier is the only one with T9, as well as small metric allens and some others. The yellow one with the orange and black handle and the tweezers has small SAE allens but no small metric. It also has some weirdies like the 5-pointer that you need to get some Sony stuff open. Both the yellow and the orange are small sizes. The red set 100 piece set with no handle has the larger sizes--it overlaps the other two a little bit. |
#10
Posted to rec.crafts.metalworking
|
|||
|
|||
Home made Torx T-9 insturment
How did that work out, your need for a T-1?
-- Christopher A. Young Learn more about Jesus www.lds.org .. wrote in message ... This explains why I've never felt the need for a set of small Torx, I bought the orange set when it first came out and at half off. Has met the need for opening up cases for several years now. Only problem is that the plastic case hinges gave out, it's got a rubber band latch now. I did have to order a T1 one time to get into an IBM Thinkpad. Nobody local carried anything that small, T5 was it. Stan |
#11
Posted to rec.crafts.metalworking
|
|||
|
|||
Home made Torx T-9 insturment
Just found that on the web. Kewl! I should have asked here,
before ordering on Ebay. Thank you. -- Christopher A. Young Learn more about Jesus www.lds.org .. "Michael A. Terrell" wrote in message m... I dug out the spare HF set, #93316. It has T-5, T-5.5, T-6, T-7, T-8 & T-9. -- You can't have a sense of humor, if you have no sense. |
#12
Posted to rec.crafts.metalworking
|
|||
|
|||
Home made Torx T-9 insturment
I thought that trigger locks were a bad idea (except
possibly for long term storage). The hammer lock sounds like an even worse idea. "hang on; don't rob me yet. I have to unlock the hammer of my revolver." -- Christopher A. Young Learn more about Jesus www.lds.org .. "DoN. Nichols" wrote in message ... O.K. A surface grinder and a small index head can work wonders on making small (or non-standard) Allen wrenches. SWMBO has a Tarus 5-shot .38 Special with the protective lock built into the hammer. It came with two "keys", which were 0.100" Security Allen wrenches with black plastic handles to go on your key ring. My ring I wear on my belt, and the plastic broke so my copy was lost, so I had to make a replacement -- with an aluminum handle so it will stay with me. I guess that a metric country would think that an imperial size in a non-standard size would be secure enough -- but it is also a pain. There is now way that I'm going to order another from them and have the same failure. :-) |
#13
Posted to rec.crafts.metalworking
|
|||
|
|||
Home made Torx T-9 insturment
Your lathe sounds like a good investment.
-- Christopher A. Young Learn more about Jesus www.lds.org .. "DoN. Nichols" wrote in message ... Hmm ... sounds like the set I got from MicroCenter (the computer box store), except that while the bottom half of the box is orange (the top is clear), the handle is orange and black instead. It has four rows of bits, straight, Philips, torx (including T9, but not security T9 if you need that) and Allen (they call them hex) in metric sizes. The flexible shaft looks like a lifesaver waiting for the right project, but it and the magnifier together are a pain, because the flex shaft is stored bent, and tries to pop out when you open the case, and the magnifier has to rest on top of it so the case can close, and tries to launch when the flex shaft pops straight. :-) If I need a security torx in these sizes which is not in my current collection (I think that I've got them all covered in 1/4" shank ones of better quality anyway), I can always pop it in a hex collet in the lathe and drill the "security" clearance hole. Enjoy, DoN. -- Remove oil spill source from e-mail Email: | Voice (all times): (703) 938-4564 (too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html --- Black Holes are where God is dividing by zero --- |
#14
Posted to rec.crafts.metalworking
|
|||
|
|||
Home made Torx T-9 insturment
On Sun, 4 Sep 2011 08:06:29 -0400, "Stormin Mormon"
wrote: How did that work out, your need for a T-1? I use T-1s daily. Many cutting inserts are held in with T-1s -- "The danger to America is not Barack Obama but a citizenry capable of entrusting a man like him with the Presidency. It will be far easier to limit and undo the follies of an Obama presidency than to restore the necessary common sense and good judgment to a depraved electorate willing to have such a man for their? president.. Blaming the prince of the fools should not blind anyone to the vast confederacy of fools that made him their prince". |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Home made valves | Electronics Repair | |||
HOME MADE | Home Repair | |||
Home Made Lathe | Woodworking | |||
Home-made Oil finish? | Woodworking | |||
Home made UPS... | Electronics |