Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
What size is this piece of pipe?
I have a number of pieces of used pipe that are from about 1 to 3 feet long.
I use them for braces, bushings, press fixtures, equipment stands, etc.. These pieces were drops that a guy who builds fences gave me many years ago. For the first time, I need to get a piece threaded. The OD is 2.405". What the heck size is it? The OD spec. for 2" water pipe is 2.375" OD. If I take a piece to my local plumbing company, will they be able to thread it with their gear? Pete Stanaitis |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
gas pipe size | Home Repair | |||
gas pipe size | Home Repair | |||
Plumbing question: getting piece of broken pipe out of drain pipe | Home Repair | |||
Top piece of shower diverter is stuck in the pipe | Home Repair | |||
Top piece of shower diverter is stuck in the pipe | Home Repair |