Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Refrigerator not working again!
Ignoramus30441 wrote:
Well, here's a little update. After 36 hours of sitting without power, the fridge would not start, the compressor motor buzzes and shuts off in 20 seconds or so. So, presumptively, the compressor is seized. I want to know how much would it cost to replace it, by a fridge repair professional of course. Thanks i That is when I'd toss it. Next machine, forget the eye candy electronics, it isn't required to make a decent fridge. I'm still running a 1987 Hotpoint that came with my modular home. I've replaced the fan in the freezer section and the mechanical defrost timer, both fairly cheap and a learning experience. A compressor with labor costs, that is time to walk away and buy another fridge. I hope your wife isn't into stainless steel and other cost increasers. Wes |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Refrigerator not working again!
On 2010-09-24, Wes wrote:
Ignoramus30441 wrote: Well, here's a little update. After 36 hours of sitting without power, the fridge would not start, the compressor motor buzzes and shuts off in 20 seconds or so. So, presumptively, the compressor is seized. I want to know how much would it cost to replace it, by a fridge repair professional of course. Thanks i That is when I'd toss it. Next machine, forget the eye candy electronics, it isn't required to make a decent fridge. We bought it used for not too much. But I agree. I do not think that the electronics is at fault here, though. For a garage fridge, we need a bare bones simple fridge. I would like a side by side, but without water or ice maker. I'm still running a 1987 Hotpoint that came with my modular home. I've replaced the fan in the freezer section and the mechanical defrost timer, both fairly cheap and a learning experience. A compressor with labor costs, that is time to walk away and buy another fridge. I hope your wife isn't into stainless steel and other cost increasers. For inside the house, maybe, but for the garage regular white should work. i |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Refrigerator not working again!
On Sep 23, 6:46*pm, Ignoramus30441 ignoramus30...@NOSPAM.
30441.invalid wrote: On 2010-09-24, Wes wrote: Ignoramus30441 wrote: Well, here's a little update. After 36 hours of sitting without power, the fridge would not start, the compressor motor buzzes and shuts off in 20 seconds or so. So, presumptively, the compressor is seized. I want to know how much would it cost to replace it, by a fridge repair professional of course. Thanks i That is when I'd toss it. *Next machine, forget the eye candy electronics, it isn't required to make a decent fridge. We bought it used for not too much. But I agree. I do not think that the electronics is at fault here, though. For a garage fridge, we need a bare bones simple fridge. I would like a side by side, but without water or ice maker. I'm still running a 1987 Hotpoint that came with my modular home. I've replaced the fan in the freezer section and the mechanical defrost timer, both fairly cheap and a learning experience. *A compressor with labor costs, that is time to walk away and buy another fridge. *I hope your wife isn't into stainless steel and other cost increasers. For inside the house, maybe, but for the garage regular white should work. i I tried to buy a side by side last year without an ice maker, they don't stock them that way, so it was a special order, I needed a new fridge immediately. The other problem is width, appears the standard width these days is 36 inches, my space was 33, so a 32 inch refrigerator was another limit to selection. I ended up with a Whirlpool. Absolute piece of sh*t. Ice maker consumes 1/3 the freezer, has crusher and water on door (don't want or need). The doors swing open 160 degrees, and are always in the fricking way. They scaled down the 36 inch to 32, and clearly this does not work from a human factors standpoint. Everything gets lost with the narrow shelves of their design. I would suggest to stay away from the dual door refrigerators (not side by side but frige on top, freezer bottom) that have a moving mullion that seals the dual door. Seems this will be a failure with the mechanical clap-trap of having this swing in and out of the way when opening the left or right door. ignator |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Refrigerator not working again!
Ignoramus30441 wrote:
For a garage fridge, we need a bare bones simple fridge. I would like a side by side, but without water or ice maker. That's another problem. Home refrigerators were not designed to run in very low temperatures. You can get away with this in Oklahoma or something, but the winter temperatures in your Chicago-area garage may be killing the compressors. Very low condenser temperatures tend to trap the oil and prevent it flowing back to the compressor. Also, if the compressor can stay off for many hours (likely in the winter) it will go completely cold, and the oil will gel and not feed into the intake valve and main bearings. I'm not sure if the synthetic oils (PAG) used with the ozone-safe refrigerants are worse in this regard than the mineral-oil derived lubes for the old R12 fridges. Jon |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Refrigerator not working again | Home Repair | |||
Refrigerator not working again | Metalworking | |||
Refrigerator not working again | Metalworking | |||
Refrigerator not working again | Metalworking | |||
Refrigerator not working again | Metalworking |