Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Gluing brass
I am trying to glue a 0.006" brass foil to a mild steel plate. I have done
it in the past but forgot what I used (note to self: keep better records!). I have run several small scale trials and for some reason the results are dismal: JB Weld, Devcon 2-ton, E6000, household Goop, Jelly cyanoacrylate - the brass just peels off like I am using school glue! I abrade both surfaces. I clean with acetone. I leave to cure for 24 hours at least (that includes the CA). Nada! What am I missing? BTW it is the *brass* side of things where the glues do not stick. -- Michael Koblic, Campbell River, BC |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Gluing MDO | Woodworking | |||
End grain gluing. | Woodworking | |||
gluing | Woodturning | |||
Gluing Glass | Home Repair |