Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Lathe chuck spindle attachment
This here looks a rather attractive machine particularly as it is on sale:
http://busybeetools.ca/cgi-bin/picture10?NTITEM=B2227L Trying to find out more about it I looked at the manual but it is quite useless. One of the questions I had was how is the chuck attached to the spindle. The dealer tells me that there is a "flange" but any further details have not been forthcoming so far. Are there any standards that would describe such flange attachment? Are there standard sizes? I am concerned about accessories (5C collet chuck??). This machine is BTW only superficially similar to the Grizzly G0602 which I understand has a 1-3/4 - 8TPI spindle. -- Michael Koblic, Campbell River, BC |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Spindle nose adapter for Delta-Rockwell 11" lathe (#25-100) with L-00 spindle | Metalworking | |||
Vacuum hose attachment directly to lathe spindle (sherline) | Metalworking | |||
Lathe with threaded spindle - chuck centering repeatability | Metalworking | |||
chuck sticking on spindle | Metalworking | |||
Delta DP Spindle sander attachment (17-960) | Woodworking |