"Michael Koblic" wrote in message
...
This here looks a rather attractive machine particularly as it is on sale:
http://busybeetools.ca/cgi-bin/picture10?NTITEM=B2227L
Trying to find out more about it I looked at the manual but it is quite
useless. One of the questions I had was how is the chuck attached to the
spindle. The dealer tells me that there is a "flange" but any further
details have not been forthcoming so far.
Are there any standards that would describe such flange attachment? Are
there standard sizes? I am concerned about accessories (5C collet
chuck??). This machine is BTW only superficially similar to the Grizzly
G0602 which I understand has a 1-3/4 - 8TPI spindle.
Enco makes (or made) a nice lathe with cam-lock chuck, that can fit a 5C
snap handle collet setup.
If you plan on switching often between lathe chuck and collets, cam-lock is
a dream.
The lathe you show is definitely not camlock, as you would see 3 add'l
square socket ditties, for the cams.
I wonder if 10" is large enough for a 5C collet system..... your 1" bore
would not be large enough for 5C.
--
EA
--
Michael Koblic,
Campbell River, BC