Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Stuck BOSS...
I have a BOSS with the micrometer locknut stuck at the bottomed out zero position. So far Kroil has not released it, nor has considerable torque applied from channel locks via some 1/8" hard rubber to protect the knurl. Suggestions? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
BPT BOSS 5 opinions | Metalworking | |||
Boss white | UK diy | |||
How smart is your boss | Home Repair | |||
Strap On Boss | UK diy |