Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Gasket Cutter Photos
I made this little cutter to make the spindle gasket for my Hardinge
TM, which is finally going back together. It uses No. 11 X-acto blades. I may add a dowel for the slot in the blade, but maybe not. It worked fine on a cutter mat. The pivot is a hand ground point on a set screw locked by a second set screw. http://metalworking.com/dropbox/GasketCutter.txt http://metalworking.com/dropbox/GasketCutter01.JPG http://metalworking.com/dropbox/GasketCutter02.JPG Pete Keillor |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
gasket material? | UK diy | |||
Exhaust gasket goo | Metalworking | |||
window gasket? | Home Repair | |||
Gasket design | Home Repair | |||
How is a "Gasket" Different from a "Washer?" | Home Repair |