Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Flood coolant on Clausing lathe
My Clausing has a flood coolant system. Which actually works, except
the switch for it does not work. I will fix it, but the pump is working great. I have cleaned up the system somewhat and it is running smoothly. For coolant, I used a water soluble oil from McMaster that I diluted about 40:1. This oil is not so bad, as I kept a jar of it diluted for about half a year, and it did not separate and did not stink. My question is, would occasional use of this coolant rust the lathe. -- Due to extreme spam originating from Google Groups, and their inattention to spammers, I and many others block all articles originating from Google Groups. If you want your postings to be seen by more readers you will need to find a different means of posting on Usenet. http://improve-usenet.org/ |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Flood coolant on Clausing lathe
Ignoramus10426 wrote:
My Clausing has a flood coolant system. Which actually works, except the switch for it does not work. I will fix it, but the pump is working great. I have cleaned up the system somewhat and it is running smoothly. For coolant, I used a water soluble oil from McMaster that I diluted about 40:1. This oil is not so bad, as I kept a jar of it diluted for about half a year, and it did not separate and did not stink. My question is, would occasional use of this coolant rust the lathe. Iggy Make sure it doesn't freeze in the system, you have the lathe in your garage in Chicago right. CarlBoyd |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Flood coolant on Clausing lathe
On 2009-01-11, CarlBoyd wrote:
Ignoramus10426 wrote: My Clausing has a flood coolant system. Which actually works, except the switch for it does not work. I will fix it, but the pump is working great. I have cleaned up the system somewhat and it is running smoothly. For coolant, I used a water soluble oil from McMaster that I diluted about 40:1. This oil is not so bad, as I kept a jar of it diluted for about half a year, and it did not separate and did not stink. My question is, would occasional use of this coolant rust the lathe. Iggy Make sure it doesn't freeze in the system, you have the lathe in your garage in Chicago right. I added RV entifreeze to it, approximately 1/5th of the total quantity of liquid. It should be enough, I think, given that I try to keep my garage not too cold. -- Due to extreme spam originating from Google Groups, and their inattention to spammers, I and many others block all articles originating from Google Groups. If you want your postings to be seen by more readers you will need to find a different means of posting on Usenet. http://improve-usenet.org/ |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Flood coolant on Clausing lathe
On Sat, 10 Jan 2009 22:17:23 -0600, Ignoramus10426
wrote: On 2009-01-11, CarlBoyd wrote: Ignoramus10426 wrote: My Clausing has a flood coolant system. Which actually works, except the switch for it does not work. I will fix it, but the pump is working great. I have cleaned up the system somewhat and it is running smoothly. For coolant, I used a water soluble oil from McMaster that I diluted about 40:1. This oil is not so bad, as I kept a jar of it diluted for about half a year, and it did not separate and did not stink. My question is, would occasional use of this coolant rust the lathe. Make sure it doesn't freeze in the system, you have the lathe in your garage in Chicago right. I added RV entifreeze to it, approximately 1/5th of the total quantity of liquid. It should be enough, I think, given that I try to keep my garage not too cold. For cheap insurance you might want to find a way to heat the tank, just in case. It will also heat the lathe a bit, so it isn't the coldest lump of iron in the room making it a condensation magnet. Something really crude like a 100W Rough Service incandescent lamp in the base of the machine over the coolant sump should do it. It'll warm the frame and the heat will rise through the works. Do NOT put it where it will get dripped on. -- Bruce -- |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
Flood coolant on Clausing lathe
On 2009-01-11, Bruce L Bergman wrote:
On Sat, 10 Jan 2009 22:17:23 -0600, Ignoramus10426 wrote: On 2009-01-11, CarlBoyd wrote: Ignoramus10426 wrote: My Clausing has a flood coolant system. Which actually works, except the switch for it does not work. I will fix it, but the pump is working great. I have cleaned up the system somewhat and it is running smoothly. For coolant, I used a water soluble oil from McMaster that I diluted about 40:1. This oil is not so bad, as I kept a jar of it diluted for about half a year, and it did not separate and did not stink. My question is, would occasional use of this coolant rust the lathe. Make sure it doesn't freeze in the system, you have the lathe in your garage in Chicago right. I added RV entifreeze to it, approximately 1/5th of the total quantity of liquid. It should be enough, I think, given that I try to keep my garage not too cold. For cheap insurance you might want to find a way to heat the tank, just in case. It will also heat the lathe a bit, so it isn't the coldest lump of iron in the room making it a condensation magnet. Something really crude like a 100W Rough Service incandescent lamp in the base of the machine over the coolant sump should do it. It'll warm the frame and the heat will rise through the works. I must have a water heater for animal waterers lying around somewhere. But with the RV antifreeze added, I do not believe that it is necessary. -- Due to extreme spam originating from Google Groups, and their inattention to spammers, I and many others block all articles originating from Google Groups. If you want your postings to be seen by more readers you will need to find a different means of posting on Usenet. http://improve-usenet.org/ |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
Flood coolant on Clausing lathe
Iggy,
I have used soluable oil on several of my machines over the years and I have found it to be a first class pain. I am a hobbiest. I do not run my machines sometimes for weeks on end. Soluable oil does not like this. The water evaporates, the tanks form slime, the residual oil left on the lathe itself leaves a sticky scum over time that is difficult and hard work to remove. On your question about rust, the answer is sometimes. It depends on what one you use and the concentration. What I do now is keep a portable CoolMist system that I can move from machine to machine when required and at the big L & S keep the coolant tank filled with regular cutting oil for the heavy steel jobs. This suits me much better than filling the coolant systems with water based coolant. For What it's Worth, Steve "Ignoramus10426" wrote in message ... My Clausing has a flood coolant system. Which actually works, except the switch for it does not work. I will fix it, but the pump is working great. I have cleaned up the system somewhat and it is running smoothly. For coolant, I used a water soluble oil from McMaster that I diluted about 40:1. This oil is not so bad, as I kept a jar of it diluted for about half a year, and it did not separate and did not stink. My question is, would occasional use of this coolant rust the lathe. -- Due to extreme spam originating from Google Groups, and their inattention to spammers, I and many others block all articles originating from Google Groups. If you want your postings to be seen by more readers you will need to find a different means of posting on Usenet. http://improve-usenet.org/ |
#7
Posted to rec.crafts.metalworking
|
|||
|
|||
Flood coolant on Clausing lathe
"Ignoramus10426" wrote in message ... My Clausing has a flood coolant system. Which actually works, except the switch for it does not work. I will fix it, but the pump is working great. I have cleaned up the system somewhat and it is running smoothly. For coolant, I used a water soluble oil from McMaster that I diluted about 40:1. This oil is not so bad, as I kept a jar of it diluted for about half a year, and it did not separate and did not stink. My question is, would occasional use of this coolant rust the lathe. I'm using Hangsterfer's S-500 at about 20:1 aand have had no odor problems in 2 years of very sporadic use. There is a light black coating on exposed metal, but that cleans up easily with some steel wool and a little WD-40. Tramp oil (from way oil?) is the biggest problem but a belt skimmer seems to take care of that. That said, I suspect that flood coolant is more beneficial on a mill than a lathe, at least for the hobbyist. |
#8
Posted to rec.crafts.metalworking
|
|||
|
|||
Flood coolant on Clausing lathe
In article ,
Ignoramus10426 wrote: My Clausing has a flood coolant system. Which actually works, except the switch for it does not work. I will fix it, but the pump is working great. I have cleaned up the system somewhat and it is running smoothly. For coolant, I used a water soluble oil from McMaster that I diluted about 40:1. This oil is not so bad, as I kept a jar of it diluted for about half a year, and it did not separate and did not stink. My question is, would occasional use of this coolant rust the lathe. Gee, I hope not, because that's exactly what I'm doing. I do wipe up after every use, but more from neatness than absolute necessity. I also wipe flung emulsion off the ceiling and back wall, so it won't stain those surfaces too badly. I used to use Cool Mist, and had endless trouble with rusting. This is one reason I went to emulsion. It does matter what kind of soluble oil one uses. The dilution also matters. I use Rustlick WS-5050, at about 20:1. The dilution is chosen so the fluid isn't too thick to spray. Given the low consumption of a HSM, there is no point in trying to save money on emulsion. I will get visible dark marks on the ways if some emulsion is left under the carriage for a few days, but no rust. Way oil also helps to prevent marks. I have not tried mixing antifreeze and soluble oil, as the lathe is in my basement, and does not freeze. But I would venture a guess that not all combinations of soluble oil and antifreeze work. This might be worth a phone call to the oil maker, as this cannot be the first time the question has come up. Joe Gwinn |
#9
Posted to rec.crafts.metalworking
|
|||
|
|||
Flood coolant on Clausing lathe
On 2009-01-11, Joseph Gwinn wrote:
In article , Ignoramus10426 wrote: My Clausing has a flood coolant system. Which actually works, except the switch for it does not work. I will fix it, but the pump is working great. I have cleaned up the system somewhat and it is running smoothly. For coolant, I used a water soluble oil from McMaster that I diluted about 40:1. This oil is not so bad, as I kept a jar of it diluted for about half a year, and it did not separate and did not stink. My question is, would occasional use of this coolant rust the lathe. Gee, I hope not, because that's exactly what I'm doing. I do wipe up after every use, but more from neatness than absolute necessity. I also wipe flung emulsion off the ceiling and back wall, so it won't stain those surfaces too badly. Off the ceiling... I used to use Cool Mist, and had endless trouble with rusting. This is one reason I went to emulsion. Yes, I actually agree that "mist" puts too much water in the air, and makes everything else dirty. I was also thinking about making a chip guard to go around the axis of rotation, to be mounts on the carriage. It does matter what kind of soluble oil one uses. The dilution also matters. I use Rustlick WS-5050, at about 20:1. The dilution is chosen so the fluid isn't too thick to spray. Given the low consumption of a HSM, there is no point in trying to save money on emulsion. I will get visible dark marks on the ways if some emulsion is left under the carriage for a few days, but no rust. Way oil also helps to prevent marks. What I like about my soluble oil, is that 1) it does not separate in at least several months year and 2) it does not stink. I filled a test jar with it when I prepared some for my cold saw, and kept it closed for that period, opened it yesterday and found it in perfect condition, even smelling kind of nicely. I have not tried mixing antifreeze and soluble oil, as the lathe is in my basement, and does not freeze. But I would venture a guess that not all combinations of soluble oil and antifreeze work. This might be worth a phone call to the oil maker, as this cannot be the first time the question has come up. I will give them a call, good idea, they are 20 miles from me. -- Due to extreme spam originating from Google Groups, and their inattention to spammers, I and many others block all articles originating from Google Groups. If you want your postings to be seen by more readers you will need to find a different means of posting on Usenet. http://improve-usenet.org/ |
#10
Posted to rec.crafts.metalworking
|
|||
|
|||
Flood coolant on Clausing lathe
On Sat, 10 Jan 2009 20:11:15 -0600, Ignoramus10426
wrote: My Clausing has a flood coolant system. Which actually works, except the switch for it does not work. I will fix it, but the pump is working great. I have cleaned up the system somewhat and it is running smoothly. For coolant, I used a water soluble oil from McMaster that I diluted about 40:1. This oil is not so bad, as I kept a jar of it diluted for about half a year, and it did not separate and did not stink. My question is, would occasional use of this coolant rust the lathe. Not likely, if the coolant contains rust inhibitors as most do and you have mixed it properly. I repair machinery for a living, and find that rust problems develop when the employees dump 5 gallons of water in the tank when it gets low..again and again without using a proper refractometer to check the water/coolant mix. Pretty soon they are running water with a slight blue tint. You will be fine. Gunner "First Law of Leftist Debate The more you present a leftist with factual evidence that is counter to his preconceived world view and the more difficult it becomes for him to refute it without losing face the chance of him calling you a racist, bigot, homophobe approaches infinity. This is despite the thread you are in having not mentioned race or sexual preference in any way that is relevant to the subject." Grey Ghost |
#11
Posted to rec.crafts.metalworking
|
|||
|
|||
Flood coolant on Clausing lathe
On 2009-01-11, Gunner Asch wrote:
On Sat, 10 Jan 2009 20:11:15 -0600, Ignoramus10426 wrote: My Clausing has a flood coolant system. Which actually works, except the switch for it does not work. I will fix it, but the pump is working great. I have cleaned up the system somewhat and it is running smoothly. For coolant, I used a water soluble oil from McMaster that I diluted about 40:1. This oil is not so bad, as I kept a jar of it diluted for about half a year, and it did not separate and did not stink. My question is, would occasional use of this coolant rust the lathe. Not likely, if the coolant contains rust inhibitors as most do and you have mixed it properly. I repair machinery for a living, and find that rust problems develop when the employees dump 5 gallons of water in the tank when it gets low..again and again without using a proper refractometer to check the water/coolant mix. Pretty soon they are running water with a slight blue tint. You will be fine. Nice to hear. I re-cleaned the lathe spotless and will start making chips pretty soon. -- Due to extreme spam originating from Google Groups, and their inattention to spammers, I and many others block all articles originating from Google Groups. If you want your postings to be seen by more readers you will need to find a different means of posting on Usenet. http://improve-usenet.org/ |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Flood coolant guard for knee mill | Metalworking | |||
keeping flood coolant under control | Metalworking | |||
Flood Coolant for Diamond wheel | Metalworking | |||
Flood Coolant | Metalworking | |||
Call me crazy (using hydraulic oil as a flood coolant) | Metalworking |