Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Adam
 
Posts: n/a
Default Preparing pine wainscoting for a bathroom

I'm installing pine wainscoting in a bathroom and want to paint it.
Should I use a primer or a sealer or anything under the paint, or can I
just paint it? I assume I should use at least semi-gloss paint. Any
other tips or warnings?
Thanks!

  #2   Report Post  
D. Gerasimatos
 
Posts: n/a
Default

In article . com,
Adam wrote:

I'm installing pine wainscoting in a bathroom and want to paint it.
Should I use a primer or a sealer or anything under the paint, or can I
just paint it? I assume I should use at least semi-gloss paint. Any
other tips or warnings?
Thanks!



Prime *both* sides to prevent warping and then paint the side facing away
from the wall. That's it.


Dimitri

  #3   Report Post  
Edwin Pawlowski
 
Posts: n/a
Default


"Adam" wrote in message
ups.com...
I'm installing pine wainscoting in a bathroom and want to paint it.
Should I use a primer or a sealer or anything under the paint, or can I
just paint it? I assume I should use at least semi-gloss paint. Any
other tips or warnings?
Thanks!



Always use a primer. Since it is in a moist environment, prime and paint
the back also before you install it. Then just go back and touch up any
marks from cutting and nailing.


  #4   Report Post  
Norminn
 
Posts: n/a
Default



Edwin Pawlowski wrote:
"Adam" wrote in message
ups.com...

I'm installing pine wainscoting in a bathroom and want to paint it.
Should I use a primer or a sealer or anything under the paint, or can I
just paint it? I assume I should use at least semi-gloss paint. Any
other tips or warnings?
Thanks!




Always use a primer. Since it is in a moist environment, prime and paint
the back also before you install it. Then just go back and touch up any
marks from cutting and nailing.



Do the cut ends, as well. Moisture will condense, run down and collect
on bottom of boards as it does on doors and woodwork. It can wick into
the end grain if not sealed up. Alkyd is my choice for woodwork,
kitchens and baths, as I believe is is less permeable than latex. Also
easier to sand out globbies and brush marks. Could be wrong. Paintable
caulk might not be a bad idea.

  #5   Report Post  
 
Posts: n/a
Default

I second Norminn's comments.
Based on talks with contractors and paint reps:
Primer is a required first coat over raw wood.
Paint seals out water vapor and water 85% better than primer.
End grain takes in water many times more readily than other wood
surfaces.
TB

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
staining Pine Mook Johnson Woodworking 5 February 14th 05 06:26 PM
NEW ENGLAND PINE BLANKET CHEST J T Woodworking 4 January 8th 05 03:09 PM
Bathroom fans improperly vented jeff Home Repair 11 June 4th 04 05:30 PM
Bathroom Mirror. Terry Home Repair 2 May 2nd 04 10:42 PM
Wood Floor in Bathroom Rob Gray Home Repair 5 February 23rd 04 04:28 AM


All times are GMT +1. The time now is 10:29 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"