DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   Preparing pine wainscoting for a bathroom (https://www.diybanter.com/home-repair/94290-preparing-pine-wainscoting-bathroom.html)

Adam March 8th 05 04:56 AM

Preparing pine wainscoting for a bathroom
 
I'm installing pine wainscoting in a bathroom and want to paint it.
Should I use a primer or a sealer or anything under the paint, or can I
just paint it? I assume I should use at least semi-gloss paint. Any
other tips or warnings?
Thanks!


D. Gerasimatos March 8th 05 07:57 AM

In article . com,
Adam wrote:

I'm installing pine wainscoting in a bathroom and want to paint it.
Should I use a primer or a sealer or anything under the paint, or can I
just paint it? I assume I should use at least semi-gloss paint. Any
other tips or warnings?
Thanks!



Prime *both* sides to prevent warping and then paint the side facing away
from the wall. That's it.


Dimitri


Edwin Pawlowski March 8th 05 11:13 AM


"Adam" wrote in message
ups.com...
I'm installing pine wainscoting in a bathroom and want to paint it.
Should I use a primer or a sealer or anything under the paint, or can I
just paint it? I assume I should use at least semi-gloss paint. Any
other tips or warnings?
Thanks!



Always use a primer. Since it is in a moist environment, prime and paint
the back also before you install it. Then just go back and touch up any
marks from cutting and nailing.



Norminn March 8th 05 11:56 AM



Edwin Pawlowski wrote:
"Adam" wrote in message
ups.com...

I'm installing pine wainscoting in a bathroom and want to paint it.
Should I use a primer or a sealer or anything under the paint, or can I
just paint it? I assume I should use at least semi-gloss paint. Any
other tips or warnings?
Thanks!




Always use a primer. Since it is in a moist environment, prime and paint
the back also before you install it. Then just go back and touch up any
marks from cutting and nailing.



Do the cut ends, as well. Moisture will condense, run down and collect
on bottom of boards as it does on doors and woodwork. It can wick into
the end grain if not sealed up. Alkyd is my choice for woodwork,
kitchens and baths, as I believe is is less permeable than latex. Also
easier to sand out globbies and brush marks. Could be wrong. Paintable
caulk might not be a bad idea.


[email protected] March 8th 05 12:24 PM

I second Norminn's comments.
Based on talks with contractors and paint reps:
Primer is a required first coat over raw wood.
Paint seals out water vapor and water 85% better than primer.
End grain takes in water many times more readily than other wood
surfaces.
TB



All times are GMT +1. The time now is 06:34 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter