I'm going to install under cabinet lights. I've looked around and this
seems to be the best deal for my needs. Before I pull the trigger I
wondered if anyone knew of a better deal.

http://www.pegasusassociates.com/UCthininch.jsp

My requirements a

-must be hard-wireable

-must be 1" thick or less ( want low profile so they won't stick out past
the lip of the cabinet )

-no more than ~$100 for everything.

I need to cover two cabinets that are 34.5" and one that is 13.5"


They have a "minimum quantity" so I'll have to pay a $10 "small order" fee
which kind of annoys me but buying two long and one short will bring the
total to about $104. Thanks for your thoughts.

(I'm going with flourescent because they seem the cheapest and most energy
efficient. It's ok that they are not dimmable)

"workinprogress" wrote in message
...
I'm going to install under cabinet lights. I've looked around and this
seems to be the best deal for my needs. Before I pull the trigger I
wondered if anyone knew of a better deal.

http://www.pegasusassociates.com/UCthininch.jsp

My requirements a

-must be hard-wireable

-must be 1" thick or less ( want low profile so they won't stick out past
the lip of the cabinet )

-no more than ~$100 for everything.

I need to cover two cabinets that are 34.5" and one that is 13.5"


They have a "minimum quantity" so I'll have to pay a $10 "small order" fee
which kind of annoys me but buying two long and one short will bring the
total to about $104. Thanks for your thoughts.

(I'm going with flourescent because they seem the cheapest and most energy
efficient. It's ok that they are not dimmable)


No experience with these models but I can say that florescent is a good way
to go since they run cool and use up to 30% less electricity. I had
florescents in my last house and we would leave them on in the night for
night lights and those trips to the kitchen for cold water, milk and
cookies.....I'm sure you will get some posts to help you more...good luck,
Ross

"Ross Mac" wrote in message
...
"workinprogress" wrote in message
...
I'm going to install under cabinet lights. I've looked around and this
seems to be the best deal for my needs. Before I pull the trigger I
wondered if anyone knew of a better deal.

http://www.pegasusassociates.com/UCthininch.jsp

My requirements a

-must be hard-wireable

-must be 1" thick or less ( want low profile so they won't stick out
past
the lip of the cabinet )

-no more than ~$100 for everything.

I need to cover two cabinets that are 34.5" and one that is 13.5"


They have a "minimum quantity" so I'll have to pay a $10 "small order"
fee
which kind of annoys me but buying two long and one short will bring the
total to about $104. Thanks for your thoughts.

(I'm going with flourescent because they seem the cheapest and most
energy
efficient. It's ok that they are not dimmable)


No experience with these models but I can say that florescent is a good
way to go since they run cool and use up to 30% less electricity. I had
florescents in my last house and we would leave them on in the night for
night lights and those trips to the kitchen for cold water, milk and
cookies.....I'm sure you will get some posts to help you more...good luck,
Ross

Correction....30% *OF* the electricity of incandescants....in other words
a1/3rd the power....

"workinprogress" wrote in message
...
I'm going to install under cabinet lights. I've looked around and this
seems to be the best deal for my needs. Before I pull the trigger I
wondered if anyone knew of a better deal.

Nope!

But you might want to look at other systems.

See if someone had an LED based system. These would have a MUCH longer
life that a flourescent tube (to the point where you just would not have to
consider replacement) and a lower profile. They might not have to total
light of the flourescent, however.

"workinprogress" wrote in message
...
I'm going to install under cabinet lights. I've looked around and this
seems to be the best deal for my needs. Before I pull the trigger I
wondered if anyone knew of a better deal.

http://www.pegasusassociates.com/UCthininch.jsp

My requirements a

-must be hard-wireable

-must be 1" thick or less ( want low profile so they won't stick out past
the lip of the cabinet )

-no more than ~$100 for everything.

I need to cover two cabinets that are 34.5" and one that is 13.5"


They have a "minimum quantity" so I'll have to pay a $10 "small order" fee
which kind of annoys me but buying two long and one short will bring the
total to about $104. Thanks for your thoughts.

(I'm going with flourescent because they seem the cheapest and most energy
efficient. It's ok that they are not dimmable)


Ibought mine at Home Depot that fit this area. Low cost. W W

I replaced thin-line under cabinet flourescents [after 20 years of service]
because the parts were too expensive.

Cheap [$20] thin line halogens at my local hardware store seem fine and can
be ganged together. I hardwired them with no problems.
They don't show and when they fail, the bulbs are inexpensive to replace.

YRMV


--
Remove -NOSPAM- to contact me.

I have some flourscents under my cabinets and after a few years the
diffusors plastic changes and they tend to fall off every few months. Very
annoying. May not be that brand though.


"workinprogress" wrote in message
...
I'm going to install under cabinet lights. I've looked around and this
seems to be the best deal for my needs. Before I pull the trigger I
wondered if anyone knew of a better deal.

http://www.pegasusassociates.com/UCthininch.jsp

My requirements a

-must be hard-wireable

-must be 1" thick or less ( want low profile so they won't stick out past
the lip of the cabinet )

-no more than ~$100 for everything.

I need to cover two cabinets that are 34.5" and one that is 13.5"


They have a "minimum quantity" so I'll have to pay a $10 "small order" fee
which kind of annoys me but buying two long and one short will bring the
total to about $104. Thanks for your thoughts.

(I'm going with flourescent because they seem the cheapest and most energy
efficient. It's ok that they are not dimmable)

"Art" wrote in message
link.net...
I have some flourscents under my cabinets and after a few years the
diffusors plastic changes and they tend to fall off every few months.
Very
annoying. May not be that brand though.


"workinprogress" wrote in message
...
I'm going to install under cabinet lights. I've looked around and this
seems to be the best deal for my needs. Before I pull the trigger I
wondered if anyone knew of a better deal.

http://www.pegasusassociates.com/UCthininch.jsp

My requirements a

-must be hard-wireable

-must be 1" thick or less ( want low profile so they won't stick out
past
the lip of the cabinet )

-no more than ~$100 for everything.

I need to cover two cabinets that are 34.5" and one that is 13.5"


They have a "minimum quantity" so I'll have to pay a $10 "small order"
fee
which kind of annoys me but buying two long and one short will bring the
total to about $104. Thanks for your thoughts.

(I'm going with flourescent because they seem the cheapest and most
energy
efficient. It's ok that they are not dimmable)


The led option is interesting but I guess I'm more familiar with this style
of flourescent so I'll probably go with that. I wouldn't mind home depot,
but that last I checked I couldn't find any low profile there, mostly the
''puck'' halogen or xeon. I like the color of halogen, but they don't last
long enough for me. I put some xeons up for Mom and they are good but
flourescent are cheaper so that will do for me. Thanks to everyone for the
input.

The led option is interesting but I guess I'm more familiar with this
style
of flourescent so I'll probably go with that. I wouldn't mind home depot,
but that last I checked I couldn't find any low profile there, mostly the
''puck'' halogen or xeon. I like the color of halogen, but they don't
last
long enough for me. I put some xeons up for Mom and they are good but
flourescent are cheaper so that will do for me. Thanks to everyone for
the
input.

from what i can tell, you know know less about the fixtures now, than you
did before you started the thread. this is called negative information.
newsgroups are very good at providing negative information.

randy

"xrongor" wrote in message
...
The led option is interesting but I guess I'm more familiar with this
style
of flourescent so I'll probably go with that. I wouldn't mind home
depot,
but that last I checked I couldn't find any low profile there, mostly
the
''puck'' halogen or xeon. I like the color of halogen, but they don't
last
long enough for me. I put some xeons up for Mom and they are good but
flourescent are cheaper so that will do for me. Thanks to everyone for
the
input.

from what i can tell, you know know less about the fixtures now, than you
did before you started the thread. this is called negative information.
newsgroups are very good at providing negative information.

randy


Speaking of negative information, that's about what you contributed to this
thread.

And where did you see that I was trying to 'learn about the fixtures'? I
asked if anyone knew of any better deals based on my listed requirements.

Whatever is wrong with you, I hope you feel better tomorrow.

Those are rated at 4100K , that is a cool white light, not exactly
what you want in a kitchen as things will apear grey-your hands and
food, 4100K is a good workshop light. A 3800K or Kelvin light is warmer
and nicer, food looks real. Also those only are putting out 30-45 LPW
-Lumen per watt. T-8 tube vs T-5 have more choises and go to 110 LPW,
or twice as efficient. Go to HD and there are T-8 fixtures with warm
white bulbs you will like better. K-or Kelvin is the color temp rating,
how warm the color is and how nice they will look. I found nice T-8-warm
white 3800K at HD or Menards. Its all in the bulb.
Forget LED they are 17-19 LPW same as incandesant and way to pricey.
Yes colored LEDs are most efficient , just not white yet

Lampi lights at HD and others are wired to a plug but the wire can be
cut and hard wired. Compare cool white 4100k to warm white 3800K there
are displays at certain stores , put your hand under the light directly
you will notice the color difference, grey vs natural. Warm white is for
kitchens and living areas , not cool white 4100K , cool white is for
garages and work areas, cool white bulbs are the cheap ones.

"m Ransley" wrote in message
...
Lampi lights at HD and others are wired to a plug but the wire can be
cut and hard wired. Compare cool white 4100k to warm white 3800K there
are displays at certain stores , put your hand under the light directly
you will notice the color difference, grey vs natural. Warm white is for
kitchens and living areas , not cool white 4100K , cool white is for
garages and work areas, cool white bulbs are the cheap ones.


Thanks for the info. I know that flourescents in general have a cooler
color. I've put low voltage xeons up before (under cabinet) and they look
good; bright and warm (color) and are dimmable. I don't remember the Kelvin
rating. However I want to do about 83 inches for ~$100 and from what I've
found so far, the price goes up as the color temp goes down. So I am
settling for flourescent to save money.