Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
JackD
 
Posts: n/a
Default table saw: Grizzly cabinet vs Delta contractor's


"BobAtVandy" wrote in message
.. .
I'm giving serious consideration to getting into woodworking and know from
these forums that investing in a good table saw is the first/best
investment.
To get the best means a cabinet saw, but that is out of my budget for a
brand name cabinet saw such as Powermatic or Jet, so that would mean I'd

buy
a contractor's saw if I were to stay with a name brand.
However, a Grizzly cabinet saw is nearer to the cost a Delta/Jet
contractor's saw. While there is much discussion on these forums of the
pros and cons of Grizzly cabinet vs brand-name cabinet, or Grizzly
contractor's saw vs brand-name contractor's saw, I haven't seen any
discussion on the following question:

Would you prefer to own a Delta or Jet contractor's saw, or a Grizzly
cabinet saw? Why?

Many thanks to any who reply.


The advantage of a cabinet saw is that they are generally heavier and are
usually equipped with heavier wings, more powerful motors, multiple belts
and heavier trunions. This would tend to make them vibrate less and they
should be better at producing high quality cuts. On the other hand, they are
heavier and have a flat base instead of legs so if you have to lift the saw
or roll it on uneven surfaces a cabinet saw is not a good choice.
Contractors saws are generally designed to be mobile enough to take to a
jobsite. Cabinet saws are meant to stay in the shop.

For me the choice was pretty clear. I got a grizzly cabinet saw which
arrived yesterday - at least most of it arrived. The fence is still in
transit. Although cosmetically the finish of some of the parts is not to the
highest standard, mechanically it seems to be pretty solid and precise.
Tonight I'll spend some time checking the alignment to be sure.

-Jack


  #2   Report Post  
Bob Lewis
 
Posts: n/a
Default table saw: Grizzly cabinet vs Delta contractor's

Bob,

This is a common thread.

The cabinet saw is superior: II has all the power you would ever need. The
trunnions used for tilting and raising the blade are separate, lockable,
smoother and hold their settings.

The Shop Fox "classic" or "standard" fence work well. There may be
advantages to a unifence or Beis, but I don't know what they are.

As for mobility, either type of saw is a handful. I own the Grizzly 1023S
with a sliding table (~550 pounds) which resides on a Shop Fox mobile base.
My shop floor is very uneven. Even so, I move the saw around with ease.

I would certainly not trade the 1023 for a contractors saw.
:

Would you prefer to own a Delta or Jet contractor's saw, or a Grizzly
cabinet saw? Why?

Many thanks to any who reply.





  #3   Report Post  
Frank Mutchler
 
Posts: n/a
Default table saw: Grizzly cabinet vs Delta contractor's

Bob, it sounds like you and I have a similar setup. I have a left tilt
Shop Fox, classic fence, and an Exaktor sliding table. I have cut a lot of
plywood as well as hardwoods using a WWII blade. I don't know how any saw
could perform significantly better than this one does. I use it every day,
fairly hard, and it just keeps on ticking.

"Bob Lewis" wrote in message
news:f%FTa.132458$H17.43519@sccrnsc02...
Bob,

This is a common thread.

The cabinet saw is superior: II has all the power you would ever need. The
trunnions used for tilting and raising the blade are separate, lockable,
smoother and hold their settings.

The Shop Fox "classic" or "standard" fence work well. There may be
advantages to a unifence or Beis, but I don't know what they are.

As for mobility, either type of saw is a handful. I own the Grizzly 1023S
with a sliding table (~550 pounds) which resides on a Shop Fox mobile

base.
My shop floor is very uneven. Even so, I move the saw around with ease.

I would certainly not trade the 1023 for a contractors saw.
:

Would you prefer to own a Delta or Jet contractor's saw, or a Grizzly
cabinet saw? Why?

Many thanks to any who reply.







  #4   Report Post  
BobAtVandy
 
Posts: n/a
Default table saw: Grizzly cabinet vs Delta contractor's

I appreciate comments. As I understand the consensus, I would summarize
this way:

Despite Delta or Jet perhaps having somewhat higher or more consistent
quality, the advantage of weight/stability/smoothness of a beefier Grizzly
cabinet saw over a Delta/Jet contractor's saw makes the Grizzly cabinet saw
the better choice. That said, the preference seems primarily a 'pleasure'
issue attributable to the smoothness and ease of cutting because (as Bob
Griffiths said, and no one else claimed otherwise) there is no material
difference in the accuracy of cut if both saws are set up true ("on the
money").

Agreed?
________________________________________
"BobAtVandy" wrote in message
.. .
I'm giving serious consideration to getting into woodworking and know from
these forums that investing in a good table saw is the first/best
investment.
To get the best means a cabinet saw, but that is out of my budget for a
brand name cabinet saw such as Powermatic or Jet, so that would mean I'd

buy
a contractor's saw if I were to stay with a name brand.
However, a Grizzly cabinet saw is nearer to the cost a Delta/Jet
contractor's saw. While there is much discussion on these forums of the
pros and cons of Grizzly cabinet vs brand-name cabinet, or Grizzly
contractor's saw vs brand-name contractor's saw, I haven't seen any
discussion on the following question:

Would you prefer to own a Delta or Jet contractor's saw, or a Grizzly
cabinet saw? Why?

Many thanks to any who reply.






  #5   Report Post  
Robert Bonomi
 
Posts: n/a
Default table saw: Grizzly cabinet vs Delta contractor's

In article ,
BobAtVandy wrote:
I'm giving serious consideration to getting into woodworking and know from
these forums that investing in a good table saw is the first/best
investment.
To get the best means a cabinet saw, but that is out of my budget for a
brand name cabinet saw such as Powermatic or Jet, so that would mean I'd buy
a contractor's saw if I were to stay with a name brand.
However, a Grizzly cabinet saw is nearer to the cost a Delta/Jet
contractor's saw. While there is much discussion on these forums of the
pros and cons of Grizzly cabinet vs brand-name cabinet, or Grizzly
contractor's saw vs brand-name contractor's saw, I haven't seen any
discussion on the following question:

Would you prefer to own a Delta or Jet contractor's saw, or a Grizzly
cabinet saw? Why?


For _me_, it's a no brainer. I *don't* have the room for a cabinet saw.
"law of restricted choices" governs. grin


  #6   Report Post  
JackD
 
Posts: n/a
Default table saw: Grizzly cabinet vs Delta contractor's


"Robert Bonomi" bonomi@c-ns. wrote in message
...
In article ,
BobAtVandy wrote:
I'm giving serious consideration to getting into woodworking and know

from
these forums that investing in a good table saw is the first/best
investment.
To get the best means a cabinet saw, but that is out of my budget for a
brand name cabinet saw such as Powermatic or Jet, so that would mean I'd

buy
a contractor's saw if I were to stay with a name brand.
However, a Grizzly cabinet saw is nearer to the cost a Delta/Jet
contractor's saw. While there is much discussion on these forums of the
pros and cons of Grizzly cabinet vs brand-name cabinet, or Grizzly
contractor's saw vs brand-name contractor's saw, I haven't seen any
discussion on the following question:

Would you prefer to own a Delta or Jet contractor's saw, or a Grizzly
cabinet saw? Why?


For _me_, it's a no brainer. I *don't* have the room for a cabinet saw.
"law of restricted choices" governs. grin


Why? They are roughly the same size. In fact the cabinet saw is smaller.

Delta 36-444 contractors saw is 40"x27"
Grizzly 1023 cabinet saw is 36 1/4" x 27 1/8"

-Jack






  #7   Report Post  
Leon
 
Posts: n/a
Default table saw: Grizzly cabinet vs Delta contractor's


"BobAtVandy" wrote in message
...
I appreciate comments. As I understand the consensus, I would summarize
this way:

Despite Delta or Jet perhaps having somewhat higher or more consistent
quality, the advantage of weight/stability/smoothness of a beefier Grizzly
cabinet saw over a Delta/Jet contractor's saw makes the Grizzly cabinet

saw
the better choice. That said, the preference seems primarily a 'pleasure'
issue attributable to the smoothness and ease of cutting because (as Bob
Griffiths said, and no one else claimed otherwise) there is no material
difference in the accuracy of cut if both saws are set up true ("on the
money").

Agreed?


Agreed somewhat. The cabinet saws have the power to cut just about anything
you throw at them, including stacked dado blades. Contractors saws will
reach their limits sooner, especially in thicker hard woods. Also, the
cabinet saws are more likely to stay in tune better than the lighter weight
contractor saws. A smoother running saw is going to translate into smoother
cuts regardless of how well set up 2 different saws may be. That is not a
pleasure factor.
That said, a Yugo and a Mercedes will both get you to the same place.


  #8   Report Post  
Bill Wallace
 
Posts: n/a
Default table saw: Grizzly cabinet vs Delta contractor's

Regarding preference, a cabinet saw is preferrable due to the HP
availability and inherent greater stability (ie weight) which dampens
vibration allowing cleaner cuts. I bet I could tell the difference
between 5 cross cuts on wide stock with a cabinet vs contractor saws
by simply using my square.

That being said, you must also consider your capacity to support 220v
AND the amperage load of the saw. The Grizzly wants 220 with 18 amps
but a typical contractors saw is/can be 110 and probably only 15 or
less amps.

Having a beefy saw with two few amps in the circuit (or a skinny
extension cord) is a problem for the motor causing heating and lower
performance and or/ blowing circuits (or worse).




"BobAtVandy" wrote in message ...
I'm giving serious consideration to getting into woodworking and know from
these forums that investing in a good table saw is the first/best
investment.
To get the best means a cabinet saw, but that is out of my budget for a
brand name cabinet saw such as Powermatic or Jet, so that would mean I'd buy
a contractor's saw if I were to stay with a name brand.
However, a Grizzly cabinet saw is nearer to the cost a Delta/Jet
contractor's saw. While there is much discussion on these forums of the
pros and cons of Grizzly cabinet vs brand-name cabinet, or Grizzly
contractor's saw vs brand-name contractor's saw, I haven't seen any
discussion on the following question:

Would you prefer to own a Delta or Jet contractor's saw, or a Grizzly
cabinet saw? Why?

Many thanks to any who reply.

  #9   Report Post  
Leon
 
Posts: n/a
Default table saw: Grizzly cabinet vs Delta contractor's


"Bill Wallace" wrote in message
om...
Regarding preference, a cabinet saw is preferrable due to the HP
availability and inherent greater stability (ie weight) which dampens
vibration allowing cleaner cuts. I bet I could tell the difference
between 5 cross cuts on wide stock with a cabinet vs contractor saws
by simply using my square.

That being said, you must also consider your capacity to support 220v
AND the amperage load of the saw. The Grizzly wants 220 with 18 amps
but a typical contractors saw is/can be 110 and probably only 15 or
less amps.

IIRC the 18 amps for the 220 comes from the 2, 110 lines and is a 9 amp draw
on each. Much less than the 15 amp on the single 110 line.




Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Adjustable Shop/Die Table Too_Many_Tools Metalworking 5 April 26th 04 05:03 PM
delta 13" planer table; how flat? JLucas ILS Woodworking 0 July 20th 03 06:50 AM
Building an extension table. Rich Woodworking 2 July 18th 03 01:11 AM
My $11 coffee table Bubba Woodworking 10 July 16th 03 12:49 AM


All times are GMT +1. The time now is 09:09 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"