Our 1989 built-in microwave stopped working, so I bought a replacement. The
problem is that the old microwave was huge, and the cutout requirement for
the new microwave/trim kit is 3" smaller in height than the existing hole.

The trim kit specs 15 3/4", the existing hole is 18 1/2".

Any ideas on how to fill the gap? Should I try to match the wood stain, or
am I better off using a contrasting material? I don't have a lot of money
to spend here, that's why I'm trying to do this myself. Any ideas and
suggestions appreciated.

A picture so you can get an idea of the cabinet material/color:
http://home.comcast.net/~jdmcahren/microwave.jpg

Thanks!

"JM" wrote in message ...
Our 1989 built-in microwave stopped working, so I bought a replacement.
The
problem is that the old microwave was huge, and the cutout requirement for
the new microwave/trim kit is 3" smaller in height than the existing hole.

The trim kit specs 15 3/4", the existing hole is 18 1/2".

Any ideas on how to fill the gap? Should I try to match the wood stain,
or
am I better off using a contrasting material? I don't have a lot of money
to spend here, that's why I'm trying to do this myself. Any ideas and
suggestions appreciated.

A picture so you can get an idea of the cabinet material/color:
http://home.comcast.net/~jdmcahren/microwave.jpg

Thanks!



If that is the new MW, you have more than 3" to worry about.

Build a box out of plywood that the new MW can sit on to center it
vertically in the opening. The depth of the box should be no larger than the
interior front to back measurement of the existing shelf. Then buy some oak
filler strips and rip them down attaching to the top, bottom and sides of
the existing cabinet to create the new net size you need. The bottom filler
strip should be level with the top of the box that you built.

If you can't match the oak color you could use black or any other color you
choose.

Colbyt

"JM" wrote in message ...
Our 1989 built-in microwave stopped working, so I bought a replacement.
The problem is that the old microwave was huge, and the cutout requirement
for the new microwave/trim kit is 3" smaller in height than the existing
hole.

The trim kit specs 15 3/4", the existing hole is 18 1/2".

Any ideas on how to fill the gap? Should I try to match the wood stain,
or am I better off using a contrasting material? I don't have a lot of
money to spend here, that's why I'm trying to do this myself. Any ideas
and suggestions appreciated.

A picture so you can get an idea of the cabinet material/color:
http://home.comcast.net/~jdmcahren/microwave.jpg

Thanks!

Do you know the brand of the original cabinets? If so, you may be able to
buy a matching trip strip or filler.

Barring that, you may be able to buy a piece of wood and come close on the
stain. If so, it would be simple to bring it down to the required size.
You may want to consider putting a shelf in the space also. Put a couple of
cookbooks on it and it will fit right in like it belongs.
--
Ed
http://pages.cthome.net/edhome/

On Thu, 24 Feb 2005 17:21:43 -0600, "JM" wrote:

Any ideas on how to fill the gap?

Try find a matching kitchen drawer unit to fill up the gap as much
possible. The same kitchen cabinet supplier will have wood strips to
finish off the remaining gaps.

On Thu, 24 Feb 2005 17:21:43 -0600, "JM" wrote:

Our 1989 built-in microwave stopped working, so I bought a replacement. The
problem is that the old microwave was huge, and the cutout requirement for
the new microwave/trim kit is 3" smaller in height than the existing hole.

The trim kit specs 15 3/4", the existing hole is 18 1/2".

Any ideas on how to fill the gap? Should I try to match the wood stain, or
am I better off using a contrasting material? I don't have a lot of money
to spend here, that's why I'm trying to do this myself. Any ideas and
suggestions appreciated.

A picture so you can get an idea of the cabinet material/color:
http://home.comcast.net/~jdmcahren/microwave.jpg

Thanks!



Well, it doesn't look right. And the microwave is not a built-in unit.
Trying to match the wood stain and finish is not an easy task. I guess
you could install divider shelves, painted silver.

"JM" wrote in message ...
Our 1989 built-in microwave stopped working, so I bought a replacement.
The
problem is that the old microwave was huge, and the cutout requirement for
the new microwave/trim kit is 3" smaller in height than the existing hole.

The trim kit specs 15 3/4", the existing hole is 18 1/2".

Any ideas on how to fill the gap? Should I try to match the wood stain,
or
am I better off using a contrasting material? I don't have a lot of money
to spend here, that's why I'm trying to do this myself. Any ideas and
suggestions appreciated.

A picture so you can get an idea of the cabinet material/color:
http://home.comcast.net/~jdmcahren/microwave.jpg

Thanks!

Your picture helps a lot. Looks a lot like my old 1969 kitchen before the
cabinets when into the garage.

Spencer's Appliance in Mesa Az sells trim kits to fit larger openings.
Having said that you will need to buy a microwave that works with that
model.
These trim kits look funky to me, made of sheet metal and fit on 3 sides of
the microwave. Top and sides only. The trim kit expands a lot like the
expanders on window airconditioners.
Call your manufacture and see if they offer such an option.

Anything you try to do with the wood will probably not match. At least it
never does when I do it.

"JM" wrote in message ...
Our 1989 built-in microwave stopped working, so I bought a replacement.
The problem is that the old microwave was huge, and the cutout requirement
for the new microwave/trim kit is 3" smaller in height than the existing
hole.

The trim kit specs 15 3/4", the existing hole is 18 1/2".

Any ideas on how to fill the gap? Should I try to match the wood stain,
or am I better off using a contrasting material? I don't have a lot of
money to spend here, that's why I'm trying to do this myself. Any ideas
and suggestions appreciated.

A picture so you can get an idea of the cabinet material/color:
http://home.comcast.net/~jdmcahren/microwave.jpg

Thanks!

consider putting on doors. home depot/lowes sell custom sized doors, already
drilled and hinged for install.

On 2/24/2005 6:21 PM US(ET), JM took fingers to keys, and typed the
following:

Our 1989 built-in microwave stopped working, so I bought a replacement. The
problem is that the old microwave was huge, and the cutout requirement for
the new microwave/trim kit is 3" smaller in height than the existing hole.

The trim kit specs 15 3/4", the existing hole is 18 1/2".

Any ideas on how to fill the gap? Should I try to match the wood stain, or
am I better off using a contrasting material? I don't have a lot of money
to spend here, that's why I'm trying to do this myself. Any ideas and
suggestions appreciated.

A picture so you can get an idea of the cabinet material/color:
http://home.comcast.net/~jdmcahren/microwave.jpg

Thanks!

I had a similar problem. I replaced a hugh 20 year old built-in Kenmore
MW with a newer smaller GE unit. I looked around to get the largest size
I could find that would fit without too much alterations, and this was
the largest I could find that would fit. I didn't have as great a size
difference as you have there, so I just put 2x4 pieces under the new MW
to center it in the hole and used plastic trim moulding to frame out the
gap. The oak trim color is a little redder than the cabinets, but who
knows how long the MW will last. This unit will slide right out without
having to remove the moulding.
http://www.willshak.com/DCP_0629.jpg

--
Bill

Duct tape, when applied with care, can be an attractive and festive way
to display to your home repair skills to friends, neighbors and family.

"willshak" wrote in message
...
On 2/24/2005 6:21 PM US(ET), JM took fingers to keys, and typed the
following:

Our 1989 built-in microwave stopped working, so I bought a replacement.
The
problem is that the old microwave was huge, and the cutout requirement
for
the new microwave/trim kit is 3" smaller in height than the existing
hole.

The trim kit specs 15 3/4", the existing hole is 18 1/2".

Any ideas on how to fill the gap? Should I try to match the wood stain,
or
am I better off using a contrasting material? I don't have a lot of
money
to spend here, that's why I'm trying to do this myself. Any ideas and
suggestions appreciated.

A picture so you can get an idea of the cabinet material/color:
http://home.comcast.net/~jdmcahren/microwave.jpg

Thanks!

I had a similar problem. I replaced a hugh 20 year old built-in Kenmore
MW with a newer smaller GE unit. I looked around to get the largest size
I could find that would fit without too much alterations, and this was
the largest I could find that would fit. I didn't have as great a size
difference as you have there, so I just put 2x4 pieces under the new MW
to center it in the hole and used plastic trim moulding to frame out the
gap. The oak trim color is a little redder than the cabinets, but who
knows how long the MW will last. This unit will slide right out without
having to remove the moulding.
http://www.willshak.com/DCP_0629.jpg

--
Bill

Thank Looks pretty darn good. Far better than trying to use filler strips
like I suggested.

Colbyt