Taking a long shot here, seeing if anyone might have had one of these. I
have an old Snapper hi-vac walk behind mower, the 21" side discharge one,
and need to replace the rear wheels.

The rear wheels, if you remember, were attached to an axle, and I need to
remove the wheels from the axle. Of course, after loosening the nut, they
don't just pull off.

I called the local shop, and the counter gal said they get stuck on there,
and agreed with my idea of using a puller against the axle to get the wheel
off.

Has anyone done this, and able to verify this as being the correct
procedure?

Thanks,

Jon