"NSN" wrote in message
...
My wife's toilet is a bit sluggish requiring the occasional use of a
plunger. It is an American Standard, 20 years old. Could someone point
me to a "how to" article on this subject or offer suggestions. I am
hoping that a Drano like product can be used.

Thanks in advance.

Norm


This came from hallerb a regular in the group. It works wonderfully, cheap
and easy. I think you will be amazed with the results, I was.

Cheri

==================
From hallerb


"muriatic acid placed carefully will clean out the interior passages of
the toilet 20 minutes and 10 bucks if you need saftety glasses.

safe effective fast and cheap. works amazingly well as another poster
reported here, I am the one who told him about it

when you flush the toilet actually creates a wave that moves the waste
solids into the large bottom drain & trap.

but you must have enough flow to start the wave, over time sediment
builds up in the interior water passages bowl rim ald slows the flow of
fresh water. at some point stuff just swirls around....

watch under the bowl rim, often gunk built up clogging the exit holes.

you can use a coathanger end to open the holes some but the sediment
still fills the bowl rim and cant be reached.

Directions:

put on safety glasses, plunge drain bowl water, sponge is good idea
so bowl is completely empty tank water can remain as is.

put funnel in dip tube top pour a cup or two of muratic acid in funnel. and
some in bowl no splashing, and have window open and take deep breath
first, then leave room shut door wait at least 15 minutes.

then return and flush about 15 times to dilute all remaing acid. you
will see brown goo, thats the melted sediment.

this really works, and can be repeated if need be."
..