Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
How do I connect a wood 2x6 to steel beam??
I need to frame in around a beam in my basement for drywalling. I want
to connect a wood 2x6 to the steel beam running down my middle of the basement. Can I glue it and will the glue hold? Drill a hole in the beam does not sound safe. I cannot be the only one who needs to do this but a google search did not return anything. Any one out there know an easy solution? Joe |
#2
Posted to alt.home.repair
|
|||
|
|||
How do I connect a wood 2x6 to steel beam??
|
#3
Posted to alt.home.repair
|
|||
|
|||
How do I connect a wood 2x6 to steel beam??
On Aug 19, 2:38 pm, wrote:
I need to frame in around a beam in my basement for drywalling. I want to connect a wood 2x6 to the steel beam running down my middle of the basement. Can I glue it and will the glue hold? Drill a hole in the beam does not sound safe. The greatest stress on an I beam is the bending force on the vertical web. Drilling a few modest holes in the horizontal plate at the bottom (presumably where the 2 x 6 will be attached) will have little effect on the beam. Intuitively, 3/8" holes spaced 4' apart ought to do the job. Others may have a better idea. Joe |
#4
Posted to alt.home.repair
|
|||
|
|||
How do I connect a wood 2x6 to steel beam??
On Sun, 19 Aug 2007 12:38:31 -0700, wrote:
Any one out there know an easy solution? Authentic Looking False Beams? Faux Timber? Click the gray picture on the right side to enlarge it. http://www.onthehouse.com/wp/19930816 ...2 cents.. -- Oren "Well, it doesn't happen all the time, but when it happens, it happens constantly." |
#5
Posted to alt.home.repair
|
|||
|
|||
How do I connect a wood 2x6 to steel beam??
mount the wood to the beam with self drilling metal screws.
steve wrote in message ps.com... I need to frame in around a beam in my basement for drywalling. I want to connect a wood 2x6 to the steel beam running down my middle of the basement. Can I glue it and will the glue hold? Drill a hole in the beam does not sound safe. I cannot be the only one who needs to do this but a google search did not return anything. Any one out there know an easy solution? Joe |
#6
Posted to alt.home.repair
|
|||
|
|||
How do I connect a wood 2x6 to steel beam??
On Aug 19, 3:38 pm, wrote:
I need to frame in around a beam in my basement for drywalling. I want to connect a wood 2x6 to the steel beam running down my middle of the basement. Can I glue it and will the glue hold? Drill a hole in the beam does not sound safe. I cannot be the only one who needs to do this but a google search did not return anything. Any one out there know an easy solution? Why do you have to attach to the beam at all? Use steel studs, track and/or channel to box out around the beam. Essentially you're making two ladders out of steel studs and hanging them from the ceiling joists on either side of the beam. The drywall bottom will hang just a little lower than the bottom of the beam so there will be little impact on headroom. R |
#7
Posted to alt.home.repair
|
|||
|
|||
How do I connect a wood 2x6 to steel beam??
On Sun, 19 Aug 2007 14:37:43 -0700, RicodJour
wrote: On Aug 19, 3:38 pm, wrote: I need to frame in around a beam in my basement for drywalling. I want to connect a wood 2x6 to the steel beam running down my middle of the basement. Can I glue it and will the glue hold? Drill a hole in the beam does not sound safe. I cannot be the only one who needs to do this but a google search did not return anything. Any one out there know an easy solution? Why do you have to attach to the beam at all? Use steel studs, track and/or channel to box out around the beam. Essentially you're making two ladders out of steel studs and hanging them from the ceiling joists on either side of the beam. The drywall bottom will hang just a little lower than the bottom of the beam so there will be little impact on headroom. R Even 2x2 wood material for the *ladders*. I agree to avoid the beam by going around it. -- Oren ...through the use of electrical or duct tape, achieve the configuration in the photo.. |
#8
Posted to alt.home.repair
|
|||
|
|||
How do I connect a wood 2x6 to steel beam??
On Aug 19, 2:38 pm, wrote:
I need to frame in around a beam in my basement for drywalling. I want to connect a wood 2x6 to the steel beam running down my middle of the basement. Can I glue it and will the glue hold? Drill a hole in the beam does not sound safe. I cannot be the only one who needs to do this but a google search did not return anything. Any one out there know an easy solution? Joe Also asking... Why attach to beam, just hang your box down from the floor joists. |
#9
Posted to alt.home.repair
|
|||
|
|||
How do I connect a wood 2x6 to steel beam??
wrote in message ps.com... I need to frame in around a beam in my basement for drywalling. I want to connect a wood 2x6 to the steel beam running down my middle of the basement. Can I glue it and will the glue hold? Drill a hole in the beam does not sound safe. I cannot be the only one who needs to do this but a google search did not return anything. Any one out there know an easy solution? Joe Joe, I had a large beam going down the middle of my finished basement. I glued a 1x8 to the bottom and fitted fluorescent lighting (single tube) into each side of the web. I also lined the insides of the beam with 3/8 sheetrock and painted it a bright white for maximum lighting. To the edges of the glued 1x8 I attached upward sloping wings so the lighting became indirect and the tubes could not be seen. After all the above, much trim work was applied to match the crown molding in the rest of the basement and house. Got lots of complements. Ivan Vegvary |
#10
Posted to alt.home.repair
|
|||
|
|||
How do I connect a wood 2x6 to steel beam??
On Sun, 19 Aug 2007 15:07:08 -0700, RickH
wrote: Also asking... Why attach to beam, just hang your box down from the floor joists. A good time too run any wires across the room :-/ -- Oren ...through the use of electrical or duct tape, achieve the configuration in the photo.. |
#11
Posted to alt.home.repair
|
|||
|
|||
How do I connect a wood 2x6 to steel beam??
|
#12
Posted to alt.home.repair
|
|||
|
|||
How do I connect a wood 2x6 to steel beam??
wrote in message ps.com... I need to frame in around a beam in my basement for drywalling. I want to connect a wood 2x6 to the steel beam running down my middle of the basement. Can I glue it and will the glue hold? Drill a hole in the beam does not sound safe. I cannot be the only one who needs to do this but a google search did not return anything. Any one out there know an easy solution? Joe Why even use wood? Use clips. http://www.theclaw.net/ |
#13
Posted to alt.home.repair
|
|||
|
|||
How do I connect a wood 2x6 to steel beam??
|
#15
Posted to alt.home.repair
|
|||
|
|||
How do I connect a wood 2x6 to steel beam??
Joe wrote:
The greatest stress on an I beam is the bending force on the vertical web. Drilling a few modest holes in the horizontal plate at the bottom (presumably where the 2 x 6 will be attached) will have little effect on the beam. This is incorrect. The greatest sress on an I-beam is in the top and bottom plates. (Compression for the top, tension for the bottom.) The vertical web is there simply to keep the plates apart from each other. The safest place to drill holes in an I-beam is right in the middle of the vertical plate, a few feet out from the ends. (Take a look at engineered wood floor joists, and see where they have their cutouts...) Chris |
#16
Posted to alt.home.repair
|
|||
|
|||
How do I connect a wood 2x6 to steel beam??
On Aug 19, 2:38 pm, wrote:
I need to frame in around a beam in my basement for drywalling. I want to connect a wood 2x6 to the steel beam running down my middle of the basement. Can I glue it and will the glue hold? Drill a hole in the beam does not sound safe. I cannot be the only one who needs to do this but a google search did not return anything. Any one out there know an easy solution? Joe If you really have to do it this way then maybe just make yourself some big "U" bolts out of some threaded rod (or long carriage bolts) and some perforated steel flat stock. Go around the whole beam, countersink the nuts in the wood. Using 2x8 instead of 2x6 to overhang the beam width on each side for the bolts. Flatwasher, lockwasher, tighten nut. But most people just hang soffit framing like this from the floor joists on either side of the beam. |
#17
Posted to alt.home.repair
|
|||
|
|||
How do I connect a wood 2x6 to steel beam??
On Aug 19, 3:38 pm, wrote:
I need to frame in around a beam in my basement for drywalling. I want to connect a wood 2x6 to the steel beam running down my middle of the basement. Can I glue it and will the glue hold? Drill a hole in the beam does not sound safe. I cannot be the only one who needs to do this but a google search did not return anything. Any one out there know an easy solution? Joe Why cover when you can use the beam as an interest point in the room? Get a textured metal paint - you know, faux bronze or crackled or some such - paint the beam. Or paint it with a vine stencil. Or place a really nice artificial plant vine made of silk along the web. Run a line of the really small bookcase lights facing upwards along the bottom of the web to add ambient light to the room. Play with that space - it could be very cool! |
#18
Posted to alt.home.repair
|
|||
|
|||
How do I connect a wood 2x6 to steel beam??
Duct Tape............
|
#19
Posted to alt.home.repair
|
|||
|
|||
How do I connect a wood 2x6 to steel beam??
|
#20
Posted to alt.home.repair
|
|||
|
|||
How do I connect a wood 2x6 to steel beam??
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Odd steel beam section size | UK diy | |||
Installing a steel beam | Home Repair | |||
replace beam with steel | Home Repair | |||
How to connect steel liner to boiler pipe | UK diy | |||
Designing a steel or wood beam | Metalworking |