Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
device to push slider windows tightly closed
I'm helping an elderly couple with some troublesome windows in their
home. The windows are sliders (one slider on each end) separated by a 48" fixed window. The windows are old and the latches don't work well and the seals are poor, therefore they leak air badly. I have done some weatherstripping which is an improvemetn but what I am looking for now is a device that can be inserted between the two sliders and exert some pressure on each side to force them to close tightly against the far edge. I'd like something that has an over-center type action or a screw adjustment to apply the pressure since neither occupant can handle much force. Before I go off and try to fabricate something for them can anyone suggest a commerical product that could accomplish what I am trying to do? If further explanantion is needed I'll gladly respond with more details I'd also like any ideas on what I could use to better seal the edge of the slider that mates to the end of the fixed window (the far side is not so bad to deal with.) The frames are metal (these are old windows) so there is only a very small surface to apply any weatherstrip and the gap is very small (but large enough to be a source of air leaks.) Thanks for any ideas! John Keith |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Is it possible to convert an USB wire device to a bluetooth device? | Electronics Repair | |||
ANNOUNCE: Looking for CONSTRUCTION and CONTRACTOR PROFESSIONALS who use a Windows Mobile, Palm or RIM Blackberry device | Home Repair | |||
glider/slider windows: try before you buy | Home Repair | |||
Double-Hung Spring-Loaded Windows Won't Stay Open or Closed | Home Repair | |||
Where to get small push-push panel latches? | Metalworking |