Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Removed ceiling fixture, now what?
We have a house built in the late 60s/early 70s that was clearly
renovated (in about 2004) by an idiot who had no concern for safety or building codes or anything else. We removed a heavy glass chandelier with the intention of putting in a ceiling fan, and found that the box was clearly a plastic one designed for lightweight lighting fixtures and not anything heavy, and furthermore, was not secured to anything but instead was just sort of floating in the celing. In fact, it seemed so flimsy we didn't want to put the chandelier back up. So we thought fine, we'll just stick in a lightweight fixture for now until we can get a pro out to re-do the box, since we eventually want to replace all the ceiling fixtures anyway. However, for a few reasons related to how flimsy and badly-installed the box is, we don't think it's really safe to put anything back on it--the holes to screw a mounting strip onto are stripped, for one thing, so they don't really hold securely. How can we safely cap off the wires (power, neutral, and ground) and put a cover on the hole in the ceiling until we can get an electrician out to look at it and fix it? Obviously we don't want to have live wires there but there's no way we can leave the breaker off indefinitely. BTW we have aluminum wiring. |
#2
Posted to alt.home.repair
|
|||
|
|||
Removed ceiling fixture, now what?
Electrical tape on the ends will work. There are retrofit heavy fixture/ fan
boxes, like Westinghouse 1100 that will install through the existing hole and expand inside the ceiling, joist to joist, to hang your chandelier or fan from wrote in message oups.com... We have a house built in the late 60s/early 70s that was clearly renovated (in about 2004) by an idiot who had no concern for safety or building codes or anything else. We removed a heavy glass chandelier with the intention of putting in a ceiling fan, and found that the box was clearly a plastic one designed for lightweight lighting fixtures and not anything heavy, and furthermore, was not secured to anything but instead was just sort of floating in the celing. In fact, it seemed so flimsy we didn't want to put the chandelier back up. So we thought fine, we'll just stick in a lightweight fixture for now until we can get a pro out to re-do the box, since we eventually want to replace all the ceiling fixtures anyway. However, for a few reasons related to how flimsy and badly-installed the box is, we don't think it's really safe to put anything back on it--the holes to screw a mounting strip onto are stripped, for one thing, so they don't really hold securely. How can we safely cap off the wires (power, neutral, and ground) and put a cover on the hole in the ceiling until we can get an electrician out to look at it and fix it? Obviously we don't want to have live wires there but there's no way we can leave the breaker off indefinitely. BTW we have aluminum wiring. |
#3
Posted to alt.home.repair
|
|||
|
|||
Removed ceiling fixture, now what?
wrote in message
oups.com... We have a house built in the late 60s/early 70s that was clearly renovated (in about 2004) by an idiot who had no concern for safety or building codes or anything else. We removed a heavy glass chandelier with the intention of putting in a ceiling fan, and found that the box was clearly a plastic one designed for lightweight lighting fixtures and not anything heavy, and furthermore, was not secured to anything but instead was just sort of floating in the celing. In fact, it seemed so flimsy we didn't want to put the chandelier back up. So we thought fine, we'll just stick in a lightweight fixture for now until we can get a pro out to re-do the box, since we eventually want to replace all the ceiling fixtures anyway. However, for a few reasons related to how flimsy and badly-installed the box is, we don't think it's really safe to put anything back on it--the holes to screw a mounting strip onto are stripped, for one thing, so they don't really hold securely. How can we safely cap off the wires (power, neutral, and ground) and put a cover on the hole in the ceiling until we can get an electrician out to look at it and fix it? Obviously we don't want to have live wires there but there's no way we can leave the breaker off indefinitely. BTW we have aluminum wiring. Like RBM said, there are ways to install stronger boxes. Tell the electrician the situation so he's got the right "thing" with him when he arrives. As far as covering the wires, it's a good idea, but the other option is to avoid letting anyone play on the ceiling. |
#4
Posted to alt.home.repair
|
|||
|
|||
Removed ceiling fixture, now what?
"RBM" rbm2(remove wrote in message ... Electrical tape on the ends will work. There are retrofit heavy fixture/ fan boxes, like Westinghouse 1100 that will install through the existing hole and expand inside the ceiling, joist to joist, to hang your chandelier or fan from I wouldn't just put electrical tape on without putting wire nuts on first. And does the circuit dead-end there or is the power usede further on ? wrote in message oups.com... We have a house built in the late 60s/early 70s that was clearly renovated (in about 2004) by an idiot who had no concern for safety or building codes or anything else. We removed a heavy glass chandelier with the intention of putting in a ceiling fan, and found that the box was clearly a plastic one designed for lightweight lighting fixtures and not anything heavy, and furthermore, was not secured to anything but instead was just sort of floating in the celing. In fact, it seemed so flimsy we didn't want to put the chandelier back up. So we thought fine, we'll just stick in a lightweight fixture for now until we can get a pro out to re-do the box, since we eventually want to replace all the ceiling fixtures anyway. However, for a few reasons related to how flimsy and badly-installed the box is, we don't think it's really safe to put anything back on it--the holes to screw a mounting strip onto are stripped, for one thing, so they don't really hold securely. How can we safely cap off the wires (power, neutral, and ground) and put a cover on the hole in the ceiling until we can get an electrician out to look at it and fix it? Obviously we don't want to have live wires there but there's no way we can leave the breaker off indefinitely. BTW we have aluminum wiring. |
#5
Posted to alt.home.repair
|
|||
|
|||
Removed ceiling fixture, now what?
On Mar 18, 5:17 pm, wrote:
We have a house built in the late 60s/early 70s that was clearly renovated (in about 2004) by an idiot who had no concern for safety or building codes or anything else. We removed a heavy glass chandelier with the intention of putting in a ceiling fan, and found that the box was clearly a plastic one designed for lightweight lighting fixtures and not anything heavy, and furthermore, was not secured to anything but instead was just sort of floating in the celing. In fact, it seemed so flimsy we didn't want to put the chandelier back up. So we thought fine, we'll just stick in a lightweight fixture for now until we can get a pro out to re-do the box, since we eventually want to replace all the ceiling fixtures anyway. However, for a few reasons related to how flimsy and badly-installed the box is, we don't think it's really safe to put anything back on it--the holes to screw a mounting strip onto are stripped, for one thing, so they don't really hold securely. How can we safely cap off the wires (power, neutral, and ground) and put a cover on the hole in the ceiling until we can get an electrician out to look at it and fix it? Obviously we don't want to have live wires there but there's no way we can leave the breaker off indefinitely. BTW we have aluminum wiring. Since the wire is in the ceiling there's nothing to worry about. If you are worried anyway just make sure the power is off to that wire. Then use a wire nut or black tape. |
#6
Posted to alt.home.repair
|
|||
|
|||
Removed ceiling fixture, now what?
|
#7
Posted to alt.home.repair
|
|||
|
|||
Removed ceiling fixture, now what?
"RBM" rbm2(remove wrote in message ... Electrical tape on the ends will work. There are retrofit heavy fixture/ fan boxes, like Westinghouse 1100 that will install through the existing hole and expand inside the ceiling, joist to joist, to hang your chandelier or fan from What I did was to use a standard metal box and I used a 2X4 to span the ceiling joists above the hole and I cut two lengths of 1/2" copper pipe to fit between the top of the box and the bottom of my 2X4. I used washers on both sides of the pipe sections and drilled the bottom of the box to 1/4". I mounted 2 Tee nuts on the 2X4 and used 1/4 bolts to hold everything together with a little locktite on the bolts. That sucker is going nowhere. I looked at the ceiling fan boxes and I liked my way better. -- __ Roger Shoaf Important factors in selecting a mate: 1] Depth of gene pool 2] Position on the food chain. |
#8
Posted to alt.home.repair
|
|||
|
|||
Removed ceiling fixture, now what?
Sounds like something my dad would do. Clearly it's not going anywhere, but
NEC requires a box that holds a fan to have 10/32 screws, and a standard box has 8/32. Not that I would be concerned, but an 1100 takes about two minutes to install "Roger Shoaf" wrote in message ... "RBM" rbm2(remove wrote in message ... Electrical tape on the ends will work. There are retrofit heavy fixture/ fan boxes, like Westinghouse 1100 that will install through the existing hole and expand inside the ceiling, joist to joist, to hang your chandelier or fan from What I did was to use a standard metal box and I used a 2X4 to span the ceiling joists above the hole and I cut two lengths of 1/2" copper pipe to fit between the top of the box and the bottom of my 2X4. I used washers on both sides of the pipe sections and drilled the bottom of the box to 1/4". I mounted 2 Tee nuts on the 2X4 and used 1/4 bolts to hold everything together with a little locktite on the bolts. That sucker is going nowhere. I looked at the ceiling fan boxes and I liked my way better. -- __ Roger Shoaf Important factors in selecting a mate: 1] Depth of gene pool 2] Position on the food chain. |
#10
Posted to alt.home.repair
|
|||
|
|||
Removed ceiling fixture, now what?
|
#11
Posted to alt.home.repair
|
|||
|
|||
Removed ceiling fixture, now what?
wrote in message oups.com... We have a house built in the late 60s/early 70s that was clearly renovated (in about 2004) by an idiot who had no concern for safety or building codes or anything else. We removed a heavy glass chandelier with the intention of putting in a ceiling fan, and found that the box was clearly a plastic one designed for lightweight lighting fixtures and not anything heavy, and furthermore, was not secured to anything but instead was just sort of floating in the celing. In fact, it seemed so flimsy we didn't want to put the chandelier back up. So we thought fine, we'll just stick in a lightweight fixture for now until we can get a pro out to re-do the box, since we eventually want to replace all the ceiling fixtures anyway. However, for a few reasons related to how flimsy and badly-installed the box is, we don't think it's really safe to put anything back on it--the holes to screw a mounting strip onto are stripped, for one thing, so they don't really hold securely. How can we safely cap off the wires (power, neutral, and ground) and put a cover on the hole in the ceiling until we can get an electrician out to look at it and fix it? Obviously we don't want to have live wires there but there's no way we can leave the breaker off indefinitely. BTW we have aluminum wiring. You pretty much answered your own question. But I'm a little curious, the box wasn't attached to ANYTHING? How was it kept from falling out of the ceiling? As for the strength of the box, it only has to meet code, the box can be as flimsy as paper, the fixture is pulling on the walls of the box and I'm sure even paper thin plastic can sustain 100+ lbs of tensile loading. As for a ceiling fan, that's another story. Personally I'd just cap the wires and go buy a box made for ceiling fans and then crawl into the attic and start swapping. It's not that tough, before this year I'd never done anything like that, but having done a few around the house I find that it's nothing major. |
#12
Posted to alt.home.repair
|
|||
|
|||
Removed ceiling fixture, now what?
"RBM" rbm2(remove wrote in message ... Sounds like something my dad would do. Clearly it's not going anywhere, but NEC requires a box that holds a fan to have 10/32 screws, and a standard box has 8/32. Not that I would be concerned, but an 1100 takes about two minutes to install I was installing the box where none was before so I had to be in the attic anyway. I can make 8-32 tapped holes become 10-32 tapped holes really quick. -- Roger Shoaf If you are not part of the solution, you are not dissolved in the solvent. |
#13
Posted to alt.home.repair
|
|||
|
|||
Removed ceiling fixture, now what?
Don't do that, you'd weaken the screw tabs. They do make four inch round fan
boxes though "Roger Shoaf" wrote in message ... "RBM" rbm2(remove wrote in message ... Sounds like something my dad would do. Clearly it's not going anywhere, but NEC requires a box that holds a fan to have 10/32 screws, and a standard box has 8/32. Not that I would be concerned, but an 1100 takes about two minutes to install I was installing the box where none was before so I had to be in the attic anyway. I can make 8-32 tapped holes become 10-32 tapped holes really quick. -- Roger Shoaf If you are not part of the solution, you are not dissolved in the solvent. |
#14
Posted to alt.home.repair
|
|||
|
|||
Removed ceiling fixture, now what?
"mm" wrote in message
... On 18 Mar 2007 15:17:46 -0700, wrote: We removed a heavy glass chandelier with the intention of putting in a ceiling fan, and found that the box was clearly a plastic one designed for lightweight lighting fixtures and not anything heavy, and furthermore, was not secured to anything but instead was just sort of floating in the celing. In fact, it seemed so flimsy we didn't want to put the chandelier back up. I have a related question. We use a semi-public building with 20 or 24 foot ceilings, and my friend just found out that the recessed lighting fixtures (they use flood lights, I guess) were just sitting on the drop ceiling tiles, which are about 3 feet by 6 feet. You know, white stuff, about a half inch thick. They weren't suspended from the trusses or the roof, only the tiles and electric cable. My friend is rather bothered by this, and I don't know what code is, or normal building practice. But the building was built 40 years ago, and the lights have given no problems. I don't know what the code is, but I do know it's not what you described. The lights may not have caused problems, but I can easily imagine a situation where they would, and probably all at once. |
#15
Posted to alt.home.repair
|
|||
|
|||
Removed ceiling fixture, now what?
"RBM" rbm2(remove wrote in message ... Don't do that, you'd weaken the screw tabs. When I measure a #8 screw I find it to be .160 inches, and when I measure the #10 I find it to be .185 inches. That means that I would be enlarging the hole .025 inches. If you are not familiar with decimal divisions on an inch, 1/8" =.125" ..025" is 1/5 of 1/8" If the box is that cheesy that the tabs could not safely withstand enlarging them that little tiny bit, then I would certainly not use them. I would be willing to bet that I could support my weight (almost 300# on the box I installed. I would not bet on the cheap boxes that were being sold with the tin bridge to hold up as well. -- Roger Shoaf If you are not part of the solution, you are not dissolved in the solvent. |
#16
Posted to alt.home.repair
|
|||
|
|||
Removed ceiling fixture, now what?
They build the metal fan boxes a little different than the standard boxes,
some actually enlarge the threaded holes and run a long screw right through the hole and tap the threads in the back of the box "Roger Shoaf" wrote in message ... "RBM" rbm2(remove wrote in message ... Don't do that, you'd weaken the screw tabs. When I measure a #8 screw I find it to be .160 inches, and when I measure the #10 I find it to be .185 inches. That means that I would be enlarging the hole .025 inches. If you are not familiar with decimal divisions on an inch, 1/8" =.125" .025" is 1/5 of 1/8" If the box is that cheesy that the tabs could not safely withstand enlarging them that little tiny bit, then I would certainly not use them. I would be willing to bet that I could support my weight (almost 300# on the box I installed. I would not bet on the cheap boxes that were being sold with the tin bridge to hold up as well. -- Roger Shoaf If you are not part of the solution, you are not dissolved in the solvent. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Polystyrene ceiling rose removed - how to get rid of gummy adhesive? | UK diy | |||
Ceiling fixture help | Home Repair | |||
Installing Ceiling Light Fixture | Home Repair | |||
Three bulb ceiling light fixture question | Home Repair | |||
voltage at ceiling fixture with switch off | Home Repair |