Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Sanyo PCL8800N Projector
This is A.K.A. Boxlight 6000 "Revolution III" LCD projector.
Problem, when no input or when a dark scene is on, there is a blue fuzzy line running down the center from top to bottom, about 1/20th screen size. Tech support says it MAY be that there has been a 'shift in the integrator lens' and that the optics in the light path may need to be adjusted. They know nothing beyond that, such as how to do it, or how to access it. If someone knows what the problem actually is, and/or how to correct this, it would be greatly appreciated. Other than the fuzzy blue line, the picture is crisp and sharp, and perfectly colored. Thank you for your time, Lonny |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Help with DLP Projector | Electronics Repair | |||
SANYO LCD projector - repair question | Electronics Repair | |||
Newbie question, 3M LCD projector shows computer screen during | Electronics Repair | |||
LCD projector convergence? | Electronics Repair | |||
Sanyo belts | Electronics Repair |