Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Yamaha YP-B2 turntable belt placement
I don't know about that particular turntable, but most of the ones I've =
worked on, the rubber record mat can be removed, and there is an opening = in the table for installing the belt. Just take the platter off and put = the belt around the hub, put platter back on and rotate it until the = opening is by the motor shaft. Then take a small flat blade screwdriver = and insert between the belt and platter hub and strech it over the motor = shaft. Virgil "Violent Zen" wrote in message = nk.net... I just bought a Yamaha YP-B2 turntable from a guy for 15 bucks. The = problem is that the belt is completely off. I have no idea how it is supposed = to be placed. Any idea where I can find this information? Also, what would = be a good resource for stylus and cartridge replacement for this model? = Thanks. =20 Scott =20 |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Aluminum foundries in N. Calif? | Metalworking | |||
Changing the belt on a Jet Supersaw | Woodworking | |||
New Leather Laminate Belt Arrived | Metalworking | |||
REVIEW: PC 352VS 3x21 Belt Sander | Woodworking |