Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
UK Ceeform adaptor
Does anyone know if it`s possible to buy an adaptor plate to enable the
fitting of a 16 amp ceeform (Commando) plug in the cutout for a 32 amp chassis mounting plug? I can't do any hacking about, or find a 16 amp chassis plug with a large enough mounting flange Ron(UK) |
#2
Posted to sci.electronics.repair
|
|||
|
|||
UK Ceeform adaptor
In article ,
Ron wrote: Does anyone know if it`s possible to buy an adaptor plate to enable the fitting of a 16 amp ceeform (Commando) plug in the cutout for a 32 amp chassis mounting plug? I can't do any hacking about, or find a 16 amp chassis plug with a large enough mounting flange Ron(UK) It's possible to buy anything, but sometimes you have to pay the one piece price. Anyone who doesn't own a decent mill and lathe should at least make friends with a machinist. |
#3
Posted to sci.electronics.repair
|
|||
|
|||
UK Ceeform adaptor
On 05/10/2010 16:06, Smitty Two wrote:
In , wrote: Does anyone know if it`s possible to buy an adaptor plate to enable the fitting of a 16 amp ceeform (Commando) plug in the cutout for a 32 amp chassis mounting plug? I can't do any hacking about, or find a 16 amp chassis plug with a large enough mounting flange Ron(UK) It's possible to buy anything, but sometimes you have to pay the one piece price. Anyone who doesn't own a decent mill and lathe should at least make friends with a machinist. Well I do own a lathe, and I`m sure I could knock something up, but time is money and if I can buy a ready made part that`s more acceptable to the client. Ron(UK)_ |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
SDS adaptor | UK diy | |||
15 AMP adaptor | Electronics | |||
Any 5C adaptor that could fit this? | Metalworking | |||
BSP adaptor for an Air Bottle? | UK diy | |||
Adaptor | Woodturning |