Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Another problem on LG PDP 42V5
Hi, thanks to yours aid I have solved green dots noise in my 42V5 PDP,
adjusting two trimmers on Y-SUS board. Now, one colleague with same LG chassis has this problem: Image "spreaded" in vertical and Z-SUS board noisy. Nothing changes adjusting the only trimmer present on this board... I suspect IPM failure. I tryed to exchange entire Z-SUS board with my one that work ok, and image come back ok. It have experience with this fail? It is really IPM module failed, or I should seek some other problem? Thanks in advance. -- Prima di rispondermi devi togliere le dita dal naso!!! :-) |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Aluminum soffit installation problem-How would the pros handle this problem? | Home Repair | |||
do I have a brick problem or window problem? | Home Repair | |||
Diverter valve problem fixed but now another problem. | UK diy | |||
Roof Problem - Major or Minor Problem? | Home Repair | |||
Septic system problem-pump out or drain field problem? | Home Repair |