Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #23   Report Post  
Posted to sci.electronics.components,sci.electronics.design,sci.electronics.misc,sci.electronics.repair,alt.engineering.electrical
external usenet poster
 
Posts: 415
Default 9v battery terminal blanks?

On Wed, 17 Dec 2008 04:03:52 -0000, Spehro Pefhany wrote:

On Tue, 16 Dec 2008 21:38:29 -0600, the renowned jakdedert
wrote:

DaveC wrote:
I want to keep some NiMH rechargeable 9v batteries in my tool bag (well, my
meter bag, actually). I am currently running a double loop of electrical tape
around the entire battery to insulate the terminals.

I'd like to use something more durable (one battery has had a terminal peek
through the tape) and was thinking about something like a battery terminal
connector but made of insulating material like nylon (probably of some
cheaper plastic).

Does such a thing exist? I did web searches, but maybe my terminology isn't
spot-on...

Ideas?

Thanks,


As Michael pointed out, the same caps that Duracells ship with are
available in aftermarket. Personally, I just use a piece of gaffers
(duct) tape, line the cells up--terminals down, adhesive side up--then
fold the tape down over the sides. That's enough to keep them from
shorting together. Put in a drawer or box, they won't short to anything
else.

YMMV...the goo from the tape is sometimes an issue.

jak


Now if it's AA/AAA/CR123 cells you want to protect, there are nice
little soft plastic snap boxes available that work fine. Dealextreme
sells a set of 3 4-cell AA boxes for $2.50. Pricey for a few bits of
plastic, but that includes worldwide shipping. I use them for NiMH AA
cells. You often get them for free when you buy a set of 4 cells.

Just out of curiosity, what are you using that requires a 9V
rechargable battery? Something special? Most occasional-use meters and
such like are better off with a 9V primary cell because of the low
self discharge rate of primary cells compared to NiMH.


The new type (eg. Uniross Hybrio) of NiMH have a very low self discharge. The only problem is certain devices like smoke alarms not liking the slightly lower voltage.

--
http://www.petersparrots.com http://www.insanevideoclips.com http://www.petersphotos.com

_.-"-._
_.-' `-._
_.-' `-,-"-._
|-._ _.-'" `-._
_.-"-._`-._ _.-' `-,-"-._
_.-' `-._`-._|-._ _.-'" `-._
_.-' `-._| `-._ _.-"-,-' `-._
"-._ _.-| _.-" "`-._ _.-"
`-._ _.-'_.-"-,-' `-._ _.-'
`-._ _.-'_.-' "`-._ _.-|_.-'
|_.-' `-._ _.-' "
"-._ _.-|_.-'
`-._ _.-' "
`-._ _.-'
"
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
The Gyrator as a 3-Terminal Element--by Jacob Shekel - The Gyrator as a 3-Terminal Element.pdf The Phantom Electronic Schematics 0 April 23rd 08 08:18 PM
Reciprocity Relations in Active 3-Terminal Devices - ReciprocityRelations in Active 3-Terminal Elements.pdf (1/2) Robert Baer[_3_] Electronic Schematics 2 April 20th 08 05:46 PM
Reciprocity Relations in Active 3-Terminal Devices - Reciprocity Relations in Active 3-Terminal Elements.pdf (2/2) The Phantom Electronic Schematics 0 April 20th 08 02:24 AM
Need Side Terminal Auto Battery tap [email protected] Home Repair 9 November 10th 06 05:46 AM
Battery Terminal Corrosion Prevention Sherman Home Repair 13 September 5th 05 03:26 AM


All times are GMT +1. The time now is 01:17 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"