 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#6
Posted to sci.electronics.components,sci.electronics.design,sci.electronics.misc,sci.electronics.repair,alt.engineering.electrical
|
|||
|
|||
9v battery terminal blanks?
In article ,
Tim Wescott wrote: Start harvesting the snap-on battery cords from dead electronics. Cut the wires off short (preferably inside the vinyl housing a bit). Snap them on -- there you are! Most of those break after a few operations. You could take a dead battery apart and use the connector block from that after insulating. Usually far stronger than the wire ended connectors. -- *Microsoft broke Volkswagen's record: They only made 21.4 million bugs. Dave Plowman London SW To e-mail, change noise into sound. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| The Gyrator as a 3-Terminal Element--by Jacob Shekel - The Gyrator as a 3-Terminal Element.pdf | Electronic Schematics | |||
| Reciprocity Relations in Active 3-Terminal Devices - ReciprocityRelations in Active 3-Terminal Elements.pdf (1/2) | Electronic Schematics | |||
| Reciprocity Relations in Active 3-Terminal Devices - Reciprocity Relations in Active 3-Terminal Elements.pdf (2/2) | Electronic Schematics | |||
| Need Side Terminal Auto Battery tap | Home Repair | |||
| Battery Terminal Corrosion Prevention | Home Repair | |||
Threaded Mode
