Hi All,

I built a clothes dryer for my wife, (you know the kind that folds up and
drops to the floor when you put wet clothes on them) and I am having a hell
of a time trying to get the dowels smooth. I haven't used any kind of
finish on the wood as I don't want any transfer of colour or finish to
transfer to the wet clothes. The dowels are the typical maple ones you can
buy at The Home Depot and I have sanded and sanded but as soon as they get
wet it raises the grain and I have to start all over again. Any ideas
before I turn this project over to the end user? (Who will probably scream
the first time she snags her nylons on a rogue wood fibre)

Thanks,

John

I built a clothes dryer for my wife, (you know the kind that folds up and
drops to the floor when you put wet clothes on them) and I am having a
hell
of a time trying to get the dowels smooth. I haven't used any kind of
finish on the wood as I don't want any transfer of colour or finish to
transfer to the wet clothes. The dowels are the typical maple ones you
can
buy at The Home Depot and I have sanded and sanded but as soon as they get
wet it raises the grain and I have to start all over again. Any ideas
before I turn this project over to the end user? (Who will probably
scream
the first time she snags her nylons on a rogue wood fibre)

Thanks,

Maybe a couple small coats of polyurethane on the ends? That should seal
them up, provide resistance to moisture and not transfer to clothes once
fully dry.

--
Regards,

Dean Bielanowski
Editor,
Online Tool Reviews
http://www.onlinetoolreviews.com
Over 60 woodworking product reviews online!
------------------------------------------------------------
Latest 6 Reviews:
- Fasco GN-40A Brad Nailer
- Taunton's Complete Illustrated Guide to Furniture & Cabinet Construction
- Milescraft SignCrafter
- Ryobi EMS1830SCL 12" SCMS
- Bessey K-Body Clamps
- Lumber Wizard Metal Detector

------------------------------------------------------------

Maybe a couple small coats of polyurethane on the ends? That should seal
them up, provide resistance to moisture and not transfer to clothes once
fully dry.

A couple coats on the entire rod I should have said (was thinking of a
different design to the one you are probably using).

Raw wood will always raise when exposed to moisture, wood is like a sponge
and will absorb whatever moisture it is exposed to. sand the dowls to the
desired finish and apply a sanding sealer then light sand again, then apply
a coat or two of poly to the finish desired, (Gloss, semi-gloss or satin).
you really want a durable water resistant finish on the dowels. go with a
satin finish for a more natural look if desired,
"PJL" wrote in message
...
Hi All,

I built a clothes dryer for my wife, (you know the kind that folds up and
drops to the floor when you put wet clothes on them) and I am having a
hell
of a time trying to get the dowels smooth. I haven't used any kind of
finish on the wood as I don't want any transfer of colour or finish to
transfer to the wet clothes. The dowels are the typical maple ones you
can
buy at The Home Depot and I have sanded and sanded but as soon as they get
wet it raises the grain and I have to start all over again. Any ideas
before I turn this project over to the end user? (Who will probably
scream
the first time she snags her nylons on a rogue wood fibre)

Thanks,

John

Donald Guzzetta wrote in message
...
Raw wood will always raise when exposed to moisture, wood is like a sponge
and will absorb whatever moisture it is exposed to. sand the dowls to the
desired finish and apply a sanding sealer then light sand again, then
apply
a coat or two of poly to the finish desired, (Gloss, semi-gloss or satin).
you really want a durable water resistant finish on the dowels. go with a
satin finish for a more natural look if desired,



Thanks Donald, I am concerned that whatever finish I apply may get on the
clothing that is being dryed. Do you or anybody else have suggestions on a
positively waterproof/resistant finish that won't transfer to clothing.
Product brand names would be helpful and appreciated.

Thanks,

John


"PJL" wrote in message
...
Hi All,

I built a clothes dryer for my wife, (you know the kind that folds up
and
drops to the floor when you put wet clothes on them) and I am having a
hell
of a time trying to get the dowels smooth. I haven't used any kind of
finish on the wood as I don't want any transfer of colour or finish to
transfer to the wet clothes. The dowels are the typical maple ones you
can
buy at The Home Depot and I have sanded and sanded but as soon as they
get
wet it raises the grain and I have to start all over again. Any ideas
before I turn this project over to the end user? (Who will probably
scream
the first time she snags her nylons on a rogue wood fibre)

Thanks,

John

"PJL" wrote in message

Thanks Donald, I am concerned that whatever finish I apply may get on the
clothing that is being dryed. Do you or anybody else have suggestions on
a
positively waterproof/resistant finish that won't transfer to clothing.
Product brand names would be helpful and appreciated.

My mother had one of those for many years. It had nothing on it. Just
plain old wood and it lasted for 25 years that I know of.

If you want a finish, polyurethane will not bleed.

Why not try Helmsmen?

George

"PJL" wrote in message
...

Donald Guzzetta wrote in message
...
Raw wood will always raise when exposed to moisture, wood is like a sponge
and will absorb whatever moisture it is exposed to. sand the dowls to the
desired finish and apply a sanding sealer then light sand again, then
apply
a coat or two of poly to the finish desired, (Gloss, semi-gloss or satin).
you really want a durable water resistant finish on the dowels. go with a
satin finish for a more natural look if desired,



Thanks Donald, I am concerned that whatever finish I apply may get on the
clothing that is being dryed. Do you or anybody else have suggestions on a
positively waterproof/resistant finish that won't transfer to clothing.
Product brand names would be helpful and appreciated.

Thanks,

John


"PJL" wrote in message
...
Hi All,

I built a clothes dryer for my wife, (you know the kind that folds up
and
drops to the floor when you put wet clothes on them) and I am having a
hell
of a time trying to get the dowels smooth. I haven't used any kind of
finish on the wood as I don't want any transfer of colour or finish to
transfer to the wet clothes. The dowels are the typical maple ones you
can
buy at The Home Depot and I have sanded and sanded but as soon as they
get
wet it raises the grain and I have to start all over again. Any ideas
before I turn this project over to the end user? (Who will probably
scream
the first time she snags her nylons on a rogue wood fibre)

Thanks,

John

PVC is what I used. Doesn't raise splinters to catch on stuff, don't really
need interior support at 30-36" length, but if you like you can run some
regular bullnosed stock through.

We can use the interior moisture in the wintertime.

"PJL" wrote in message
...

Donald Guzzetta wrote in message
...
Raw wood will always raise when exposed to moisture, wood is like a
sponge
and will absorb whatever moisture it is exposed to. sand the dowls to
the
desired finish and apply a sanding sealer then light sand again, then
apply
a coat or two of poly to the finish desired, (Gloss, semi-gloss or
satin).
you really want a durable water resistant finish on the dowels. go with
a
satin finish for a more natural look if desired,



Thanks Donald, I am concerned that whatever finish I apply may get on the
clothing that is being dryed. Do you or anybody else have suggestions on
a
positively waterproof/resistant finish that won't transfer to clothing.
Product brand names would be helpful and appreciated.

Thanks,

John


"PJL" wrote in message
...
Hi All,

I built a clothes dryer for my wife, (you know the kind that folds up
and
drops to the floor when you put wet clothes on them) and I am having a
hell
of a time trying to get the dowels smooth. I haven't used any kind of
finish on the wood as I don't want any transfer of colour or finish to
transfer to the wet clothes. The dowels are the typical maple ones
you
can
buy at The Home Depot and I have sanded and sanded but as soon as they
get
wet it raises the grain and I have to start all over again. Any ideas
before I turn this project over to the end user? (Who will probably
scream
the first time she snags her nylons on a rogue wood fibre)

Thanks,

John