Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 39
Default New Glass cutting tool

Well actually I can not take credit, my wife was using ceramic knife
from Harbor Frieght to cut an apple. She was cutting on a small corel
plate it broke, so if you have trouble cutting glass with the typical
glass cutter.

I got three knives for about $26 before tax. They are good knives.

Mark
  #2   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 14,845
Default New Glass cutting tool

On Sunday, April 4, 2021 at 7:52:44 PM UTC-4, Markem618 wrote:
Well actually I can not take credit, my wife was using ceramic knife
from Harbor Frieght to cut an apple. She was cutting on a small corel
plate it broke, so if you have trouble cutting glass with the typical
glass cutter.

I got three knives for about $26 before tax. They are good knives.

Mark


Many years ago I had placed one of those red clay flower pots on a
Corelle dinner plate. I don't recall why, but at some point I decided to
spin the pot on the plate, perhaps to look at a different side of the
plant.

One small turn, a screech was heard and the plate exploded. It sent
ridiculously thin curved slivers flying about 3 feet in all directions.
Ah, but it wasn't done yet. For the next 15 minutes or so, the part
of the plate that remained kept making these little "clink" sounds
as more skinny curved shards continued to break off of the edge
of the plate and drop to the table.

Obviously, I hit the resonant frequency of the plate which caused
the initial explosion. The more amazing thing, at least to me, was
the internal stresses that remained, causing continued, yet gentler
*curved* damage. It was pretty freaky.
  #3   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 33
Default New Glass cutting tool

On 4/4/2021 10:10 PM, DerbyDad03 wrote:
On Sunday, April 4, 2021 at 7:52:44 PM UTC-4, Markem618 wrote:
Well actually I can not take credit, my wife was using ceramic knife
from Harbor Frieght to cut an apple. She was cutting on a small corel
plate it broke, so if you have trouble cutting glass with the typical
glass cutter.

I got three knives for about $26 before tax. They are good knives.

Mark


Many years ago I had placed one of those red clay flower pots on a
Corelle dinner plate. I don't recall why, but at some point I decided to
spin the pot on the plate, perhaps to look at a different side of the
plant.

One small turn, a screech was heard and the plate exploded. It sent
ridiculously thin curved slivers flying about 3 feet in all directions.
Ah, but it wasn't done yet. For the next 15 minutes or so, the part
of the plate that remained kept making these little "clink" sounds
as more skinny curved shards continued to break off of the edge
of the plate and drop to the table.

Obviously, I hit the resonant frequency of the plate which caused
the initial explosion. The more amazing thing, at least to me, was
the internal stresses that remained, causing continued, yet gentler
*curved* damage. It was pretty freaky.


That sounds like fun... I wonder if anyone will be mad if I attempt to
sacrifice a dinner plate. Funny, I thought those Corelle plates were
supposed to be near-indestructible.
  #4   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 524
Default New Glass cutting tool

On Sun, 04 Apr 2021 23:21:33 -0400, Michael Trew
wrote:

On 4/4/2021 10:10 PM, DerbyDad03 wrote:
On Sunday, April 4, 2021 at 7:52:44 PM UTC-4, Markem618 wrote:
Well actually I can not take credit, my wife was using ceramic knife
from Harbor Frieght to cut an apple. She was cutting on a small corel
plate it broke, so if you have trouble cutting glass with the typical
glass cutter.

I got three knives for about $26 before tax. They are good knives.

Mark


Many years ago I had placed one of those red clay flower pots on a
Corelle dinner plate. I don't recall why, but at some point I decided to
spin the pot on the plate, perhaps to look at a different side of the
plant.

One small turn, a screech was heard and the plate exploded. It sent
ridiculously thin curved slivers flying about 3 feet in all directions.
Ah, but it wasn't done yet. For the next 15 minutes or so, the part
of the plate that remained kept making these little "clink" sounds
as more skinny curved shards continued to break off of the edge
of the plate and drop to the table.

Obviously, I hit the resonant frequency of the plate which caused
the initial explosion. The more amazing thing, at least to me, was
the internal stresses that remained, causing continued, yet gentler
*curved* damage. It was pretty freaky.


That sounds like fun... I wonder if anyone will be mad if I attempt to
sacrifice a dinner plate. Funny, I thought those Corelle plates were
supposed to be near-indestructible.


Near is not totally. In the 45 years or so that I've been using
Corelle I think I've managed to break half a dozen Corelle dishes.
  #5   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,833
Default New Glass cutting tool

On Sun, 4 Apr 2021 19:10:46 -0700 (PDT), DerbyDad03
wrote:

On Sunday, April 4, 2021 at 7:52:44 PM UTC-4, Markem618 wrote:
Well actually I can not take credit, my wife was using ceramic knife
from Harbor Frieght to cut an apple. She was cutting on a small corel
plate it broke, so if you have trouble cutting glass with the typical
glass cutter.

I got three knives for about $26 before tax. They are good knives.

Mark


Many years ago I had placed one of those red clay flower pots on a
Corelle dinner plate. I don't recall why, but at some point I decided to
spin the pot on the plate, perhaps to look at a different side of the
plant.

One small turn, a screech was heard and the plate exploded. It sent
ridiculously thin curved slivers flying about 3 feet in all directions.
Ah, but it wasn't done yet. For the next 15 minutes or so, the part
of the plate that remained kept making these little "clink" sounds
as more skinny curved shards continued to break off of the edge
of the plate and drop to the table.

Obviously, I hit the resonant frequency of the plate which caused
the initial explosion. The more amazing thing, at least to me, was
the internal stresses that remained, causing continued, yet gentler
*curved* damage. It was pretty freaky.


After many years, Corel gets very brittle and will shatter into a
kabillion very small shards with only a small impact. It is tempered
glass and acts like it. As you suspect, your flower pot probably
scratched it, starting its disintegration.


  #6   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 12,155
Default New Glass cutting tool

On 4/5/2021 12:16 PM, wrote:
On Sun, 4 Apr 2021 19:10:46 -0700 (PDT), DerbyDad03
wrote:

On Sunday, April 4, 2021 at 7:52:44 PM UTC-4, Markem618 wrote:
Well actually I can not take credit, my wife was using ceramic knife
from Harbor Frieght to cut an apple. She was cutting on a small corel
plate it broke, so if you have trouble cutting glass with the typical
glass cutter.

I got three knives for about $26 before tax. They are good knives.

Mark


Many years ago I had placed one of those red clay flower pots on a
Corelle dinner plate. I don't recall why, but at some point I decided to
spin the pot on the plate, perhaps to look at a different side of the
plant.

One small turn, a screech was heard and the plate exploded. It sent
ridiculously thin curved slivers flying about 3 feet in all directions.
Ah, but it wasn't done yet. For the next 15 minutes or so, the part
of the plate that remained kept making these little "clink" sounds
as more skinny curved shards continued to break off of the edge
of the plate and drop to the table.

Obviously, I hit the resonant frequency of the plate which caused
the initial explosion. The more amazing thing, at least to me, was
the internal stresses that remained, causing continued, yet gentler
*curved* damage. It was pretty freaky.


After many years, Corel gets very brittle and will shatter into a
kabillion very small shards with only a small impact. It is tempered
glass and acts like it. As you suspect, your flower pot probably
scratched it, starting its disintegration.



Is a kabillion more than a Brazilian?
  #7   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,833
Default New Glass cutting tool

On Mon, 5 Apr 2021 13:12:34 -0500, Leon lcb11211@swbelldotnet wrote:

On 4/5/2021 12:16 PM, wrote:
On Sun, 4 Apr 2021 19:10:46 -0700 (PDT), DerbyDad03
wrote:

On Sunday, April 4, 2021 at 7:52:44 PM UTC-4, Markem618 wrote:
Well actually I can not take credit, my wife was using ceramic knife
from Harbor Frieght to cut an apple. She was cutting on a small corel
plate it broke, so if you have trouble cutting glass with the typical
glass cutter.

I got three knives for about $26 before tax. They are good knives.

Mark

Many years ago I had placed one of those red clay flower pots on a
Corelle dinner plate. I don't recall why, but at some point I decided to
spin the pot on the plate, perhaps to look at a different side of the
plant.

One small turn, a screech was heard and the plate exploded. It sent
ridiculously thin curved slivers flying about 3 feet in all directions.
Ah, but it wasn't done yet. For the next 15 minutes or so, the part
of the plate that remained kept making these little "clink" sounds
as more skinny curved shards continued to break off of the edge
of the plate and drop to the table.

Obviously, I hit the resonant frequency of the plate which caused
the initial explosion. The more amazing thing, at least to me, was
the internal stresses that remained, causing continued, yet gentler
*curved* damage. It was pretty freaky.


After many years, Corel gets very brittle and will shatter into a
kabillion very small shards with only a small impact. It is tempered
glass and acts like it. As you suspect, your flower pot probably
scratched it, starting its disintegration.



Is a kabillion more than a Brazilian?


It depends on the bra size.
  #8   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 359
Default New Glass cutting tool

On 4/4/2021 9:10 PM, DerbyDad03 wrote:
On Sunday, April 4, 2021 at 7:52:44 PM UTC-4, Markem618 wrote:
Well actually I can not take credit, my wife was using ceramic knife
from Harbor Frieght to cut an apple. She was cutting on a small corel
plate it broke, so if you have trouble cutting glass with the typical
glass cutter.

I got three knives for about $26 before tax. They are good knives.

Mark


Many years ago I had placed one of those red clay flower pots on a
Corelle dinner plate. I don't recall why, but at some point I decided to
spin the pot on the plate, perhaps to look at a different side of the
plant.

One small turn, a screech was heard and the plate exploded. It sent
ridiculously thin curved slivers flying about 3 feet in all directions.
Ah, but it wasn't done yet. For the next 15 minutes or so, the part
of the plate that remained kept making these little "clink" sounds
as more skinny curved shards continued to break off of the edge
of the plate and drop to the table.

Obviously, I hit the resonant frequency of the plate which caused
the initial explosion. The more amazing thing, at least to me, was
the internal stresses that remained, causing continued, yet gentler
*curved* damage. It was pretty freaky.


+1 on the Harbor Freight ceramic knives. I bought one of the paring
knives about 5 or 6 years ago and only recently was my wife able to nick
the edge. She's terrible with knives and gets ****ed a me when I
sharpen them. I try to explain but. . .

Take a regular dinner place, "China" and the base ring is unglazed. Got
a dull knife? Run a couple of passes at the right angle with each side
of the blade and it's dull no more.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Replacing glass in sliding glass door Godfrey Muganda Home Repair 16 July 26th 16 06:44 PM
Adding vibration to lathe cutting tool to aid cutting amdx[_3_] Metalworking 27 June 14th 14 05:24 AM
new shower glass door installed- company put on a special coating on glass KOS Home Repair 10 June 15th 11 12:35 AM
Scratched black glass hob (glass stove). [email protected] Home Repair 0 October 9th 05 12:39 PM
Glass scrapers [was: Polishing scratches out of glass] Jerry Built UK diy 1 May 17th 04 07:27 PM


All times are GMT +1. The time now is 01:43 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"