Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Keyless chuck removal
I bought the Grizzly 18v 1/2" drill, G8597. Problem is the chuck loosens
when backing out screws in reverse and drops the bit. Griz Tech sent me a new one within 2 days, great services. Now having a problem getting the old one off. Took the screw out in the chuck but for the life of me I can't break the threads loose to get it off. Keyed chucks are easily removed by tapping the key, done it many times. How the heck do I get the keyless off? Tried everything I can think of so the solution must be too simple for my old mind..?? Help, Guys. Al in WA |
#2
|
|||
|
|||
Al wrote:
I bought the Grizzly 18v 1/2" drill, G8597. Problem is the chuck loosens when backing out screws in reverse and drops the bit. Griz Tech sent me a new one within 2 days, great services. Now having a problem getting the old one off. Took the screw out in the chuck but for the life of me I can't break the threads loose to get it off. Keyed chucks are easily removed by tapping the key, done it many times. How the heck do I get the keyless off? Tried everything I can think of so the solution must be too simple for my old mind..?? Help, Guys. Al in WA I don't have an answer for you, but I'll be watching for any you may get here. You see I have the very same drill. However, I don't have that problem...yet...knock wood. Good luck. Joe |
#3
|
|||
|
|||
Joe, I sent e-mail to Griz tech Saturday so being a long weekend I should
hear back Tuesday. Will forward their answer. Al in WA "Joe_Stein" wrote in message ink.net... Al wrote: I bought the Grizzly 18v 1/2" drill, G8597. Problem is the chuck loosens when backing out screws in reverse and drops the bit. Griz Tech sent me a new one within 2 days, great services. Now having a problem getting the old one off. Took the screw out in the chuck but for the life of me I can't break the threads loose to get it off. Keyed chucks are easily removed by tapping the key, done it many times. How the heck do I get the keyless off? Tried everything I can think of so the solution must be too simple for my old mind..?? Help, Guys. Al in WA I don't have an answer for you, but I'll be watching for any you may get here. You see I have the very same drill. However, I don't have that problem...yet...knock wood. Good luck. Joe |
#4
|
|||
|
|||
If you need some leverage, chuck up an Allen wrench in the chuck. Gives you
something to whack. "Al" wrote in message ... I bought the Grizzly 18v 1/2" drill, G8597. Problem is the chuck loosens when backing out screws in reverse and drops the bit. Griz Tech sent me a new one within 2 days, great services. Now having a problem getting the old one off. Took the screw out in the chuck but for the life of me I can't break the threads loose to get it off. Keyed chucks are easily removed by tapping the key, done it many times. How the heck do I get the keyless off? Tried everything I can think of so the solution must be too simple for my old mind..?? Help, Guys. Al in WA |
#5
|
|||
|
|||
Chuck up a hex key and tap it
"Al" wrote in message ... I bought the Grizzly 18v 1/2" drill, G8597. Problem is the chuck loosens when backing out screws in reverse and drops the bit. Griz Tech sent me a new one within 2 days, great services. Now having a problem getting the old one off. Took the screw out in the chuck but for the life of me I can't break the threads loose to get it off. Keyed chucks are easily removed by tapping the key, done it many times. How the heck do I get the keyless off? Tried everything I can think of so the solution must be too simple for my old mind..?? Help, Guys. Al in WA |
#6
|
|||
|
|||
put an allen wrench in chuck and hit it If that don't do it get an allen
wrench for use with a ratchet 3/8 drive and chuck it up and use an impact wrench works every time just make sure you're turning it the right way and good luck. Al wrote in message ... I bought the Grizzly 18v 1/2" drill, G8597. Problem is the chuck loosens when backing out screws in reverse and drops the bit. Griz Tech sent me a new one within 2 days, great services. Now having a problem getting the old one off. Took the screw out in the chuck but for the life of me I can't break the threads loose to get it off. Keyed chucks are easily removed by tapping the key, done it many times. How the heck do I get the keyless off? Tried everything I can think of so the solution must be too simple for my old mind..?? Help, Guys. Al in WA |
#7
|
|||
|
|||
Chuck up your largest Allen wrench. If 1 or 2 swats doesn't get
it, carefully position the Allen wrench between the open jaws of a metal working vise. Let the Allen "handle" smack into the jaw of the vise with drill in reverse. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Keep the whole world singing . . . . DanG (remove the sevens) "Al" wrote in message ... I bought the Grizzly 18v 1/2" drill, G8597. Problem is the chuck loosens when backing out screws in reverse and drops the bit. Griz Tech sent me a new one within 2 days, great services. Now having a problem getting the old one off. Took the screw out in the chuck but for the life of me I can't break the threads loose to get it off. Keyed chucks are easily removed by tapping the key, done it many times. How the heck do I get the keyless off? Tried everything I can think of so the solution must be too simple for my old mind..?? Help, Guys. Al in WA |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Craftsman drill keyless chuck removal | Home Repair | |||
How to remove a keyless chuck | Home Repair | |||
Keyless Chuck for Drill Press | Woodworking | |||
Tapping with keyless chuck on lathe | Metalworking | |||
Teknatool Titan Chuck draft review | Woodturning |