Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
1/8 " bandsaw blade problem
I have a Grizzly G0555 with a 12" riser. Added an Iturra spring.
I have had no problems with except one. I've been trying to use a 1/8" blade for some scroll work and I'm having a helluva time keeping the blade tracking. I get it set and it runs fine for a little while and then it will start to move either forward or back. I've tried TimberWolf and Olsen and HIghland Hardware 105" blades and it makes no difference. I've tried putting it on the crest of the wheel, just in front or just behind the crest. It just seems so touchy I figure there must be a better way. Any ideas? Thanx, Vic -- There are 10 kinds of people - those who understand binary and those who don't |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Problems with 3/16" blade on my 14" bandsaw - help needed please | Woodworking | |||
92" BandSaw Blade | Woodworking | |||
Blade Tracking Problem - Delta 14" Bandsaw | Woodworking | |||
Bandsaw blade offset problem. | Woodworking | |||
Bandsaw blade tracking problem | Woodworking |