Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
power feeds
Has anyone come across an article that compares and contrasts various power
feeds across various applications? Of particular interest is the use of power feeds on shapers (3 HP), table saws (3 HP), and also for use on large bandsaws (e.g., 36" 5 HP) for resawing. I didn't find anything like this on the FWW or PWW sites though Lonnie Bird's book on shapers discusses power feed use but in generic terms... Thanks, John |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
If it feeds 6 gph, how come it only uses 18 gpd | Home Repair | |||
Speeds & Feeds | Metalworking | |||
Revamping CH Feeds | UK diy | |||
goat glands [adding power cross/down feeds] | Metalworking | |||
rss feeds for houses | Home Ownership |