Moving off a far distant, furthermost back burner, and toward a back
burner closer to the front, is a personal bar stool project:

https://picasaweb.google.com/1113554...ssionBarStool#

Although buying project wood is usually a sure sign that a project will
be started in earnest, and finished (I have never not finished a project
started), there is only enough wood in the photo to make the legs for
two, of four anticipated, bar stools (on this visit there was not enough
_suitable_ white oak, in stock at this particular hardwood lumber
supplier, to purchase any more than what you see here).

With some species of domestic lumber becoming harder to find, and their
high prices these days, it is damned nigh impossible to compete with
"factory made" tables and chairs ... AAMOF, it is highly probable that
one would save money by going to Stickley, or The Amish Craftsman, and
just buying the damned things ... that is if some of us weren't so stubborn.

What the hell, you only live once ...

--
www.eWoodShop.com
Last update: 4/15/2010
KarlCaillouet@ (the obvious)
http://gplus.to/eWoodShop

On 10/27/2012 2:34 PM, Swingman wrote:
Moving off a far distant, furthermost back burner, and toward a back
burner closer to the front, is a personal bar stool project:

https://picasaweb.google.com/1113554...ssionBarStool#


Although buying project wood is usually a sure sign that a project will
be started in earnest, and finished (I have never not finished a project
started), there is only enough wood in the photo to make the legs for
two, of four anticipated, bar stools (on this visit there was not enough
_suitable_ white oak, in stock at this particular hardwood lumber
supplier, to purchase any more than what you see here).

With some species of domestic lumber becoming harder to find, and their
high prices these days, it is damned nigh impossible to compete with
"factory made" tables and chairs ... AAMOF, it is highly probable that
one would save money by going to Stickley, or The Amish Craftsman, and
just buying the damned things ... that is if some of us weren't so
stubborn.

What the hell, you only live once ...



Cool design!

If it makes you feel any better, I looked pretty closely at some Mission
style Stickley furniture at Lewis Shanks Furniture 6~7 years ago and
while it looks like pretty from the "sell side" the back sides of the
chests had a MUCH less than desirable look. Inside the drawers were not
impressive either.

If you'll be trick or treating in my neighborhood, I could unload some white oak on you. I've never worked with WO and, 2 yrs ago, I inherited quite a bit of it.... it's just stacked there waiting for a/someone's project to come along. Your bar stools look like a neat project.

Yesterday, I went out to the farm and started tearing down an old cypress house. Got the roof off. The roof rafters seems to have once been hand hewn beams, later sawn into rafters. The cross boards, for attaching the original wooden shingles, are split boards, rather than sawn. Unusual lumber and should make for some nice rustic pieces. Will go back out this morning to salvage more - ceiling joists, wall boards (1X stock) and hopefully flooring and floor joists. Tommorrow (Monday), the area will be dozed for expanding the rice fields, so we'll need to work fast, today.

On a sad note: The neighboring farmer, while harvesting his cotton, his cotton picker exploded (several explosions) and caught fire. Never like to see a neighbor have those kinds of accidents. Initial, I wasn't aware of the problem, a tree line was between us, so not sure if the driver was injured.

Sonny

"Sonny" wrote:

If you'll be trick or treating in my neighborhood, I could unload some
white oak on you. I've never worked with WO and, 2 yrs ago, I
inherited quite a bit of it.... it's just stacked there waiting for
a/someone's project to come along. Your bar stools look like a neat
project.
-----------------------------------------------------------------
Machine a piece of that white oak, especially quarter sawn,
then apply some boiled linseed oil cut with some turps.

You can also use mineral spirits, I just like the smell of turps.

Wait a couple of days before rubbing out.

Might surprize yourself.

Lew

On 10/31/2012 12:35 PM, Lew Hodgett wrote:
Machine a piece of that white oak, especially quarter sawn,
then apply some boiled linseed oil cut with some turps.

You can also use mineral spirits, I just like the smell of turps.

Wait a couple of days before rubbing out.

Might surprize yourself.


Amazing what just sanding and applying shellac will do with QS oak of
any kind ... look at the _insides_ of these QS red oak drawer sides,
nothing but a shellac topocoat:

https://picasaweb.google.com/1113554...30901725011202

--
www.eWoodShop.com
Last update: 4/15/2010
KarlCaillouet@ (the obvious)
http://gplus.to/eWoodShop

On Wed, 31 Oct 2012 13:36:47 -0500, Swingman wrote:

On 10/31/2012 12:35 PM, Lew Hodgett wrote:
Machine a piece of that white oak, especially quarter sawn,
then apply some boiled linseed oil cut with some turps.

You can also use mineral spirits, I just like the smell of turps.

Wait a couple of days before rubbing out.

Might surprize yourself.


Amazing what just sanding and applying shellac will do with QS oak of
any kind ... look at the _insides_ of these QS red oak drawer sides,
nothing but a shellac topocoat:

https://picasaweb.google.com/1113554...30901725011202

Pretty! Quite yellow, too. Did you use lemon shellac? I bought
blonde bug spit for my own use (preferring clearcoats on everything),
but for an A&C piece, I'd probably have selected a garnet shellac to
blend with the outer color. "Porque you no stain the drawer pieces,
too, señor?" asked the cat.

--
It is easier to fool people than it is to
convince people that they have been fooled.
--Mark Twain

Larry Jaques wrote:

Pretty! Quite yellow, too. Did you use lemon shellac? I bought
blonde bug spit for my own use (preferring clearcoats on everything),
but for an A&C piece, I'd probably have selected a garnet shellac to
blend with the outer color.

Amber ... Right outta the Binsser can, cut to 1 1/2lb.

--
www.ewoodshop.com (Mobile)

https://picasaweb.google.com/1113554...56043527134674


--
eWoodShop: www.eWoodShop.com
Wood Shop: www.e-WoodShop.net
http://gplus.to/eWoodShop
KarlCaillouet@ (the obvious)

On Sun, 02 Dec 2012 19:45:47 -0600, Swingman wrote:
https://picasaweb.google.com/1113554...56043527134674

Hi Karl. Can you tell me how you bent this wood? Thanks

On 12/2/2012 8:03 PM, Dave wrote:
Hi Karl. Can you tell me how you bent this wood? Thanks

Not bent, band saw and pattern bit on a router table:

https://picasaweb.google.com/1113554...65305303561778

https://picasaweb.google.com/1113554...52927056371682

https://picasaweb.google.com/1113554...10 2887739186

--
eWoodShop: www.eWoodShop.com
Wood Shop: www.e-WoodShop.net
http://gplus.to/eWoodShop
KarlCaillouet@ (the obvious)

On 12/2/2012 9:03 PM, Dave wrote:
On Sun, 02 Dec 2012 19:45:47 -0600, Swingman wrote:
https://picasaweb.google.com/1113554...56043527134674

Hi Karl. Can you tell me how you bent this wood? Thanks

nice work there Swingman, but just out of curiousity did you cut these
chamfers on the tablesaw? how'd you get the bent leg section out of the
way, raise the leg off the top, or did you cut w/the leg vertical?

You and Leon and your festools... do you get a kickback from Festool for
showing all your festools?????
Got any spares to prove to me how good they are???? :-)

Swingman wrote in
:


https://picasaweb.google.com/1113554...hopMissionBarS
tool#5817456043527134674

+1! How did you do that?

--
Best regards
Han
email address is invalid

On 12/2/2012 8:05 PM, Han wrote:
Swingman wrote in

https://picasaweb.google.com/1113554...hopMissionBarS
tool#5817456043527134674

+1! How did you do that?

How did I do what?

If you mean those bevels ... simple: a Jig and a miter saw.

ALWAYS think JIG!

(Basically, there is nothing that can't be done if you can imagenineer a
jig to do it).

--
eWoodShop: www.eWoodShop.com
Wood Shop: www.e-WoodShop.net
http://gplus.to/eWoodShop
KarlCaillouet@ (the obvious)

On Sun, 02 Dec 2012 19:45:47 -0600, Swingman wrote:


https://picasaweb.google.com/1113554...56043527134674


If you look at Karl's sig he has added a web site that I think will do
well for him. His pictures really make the spaces look huge.

Mike M