Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 1,134
Default HF Variable Speed Multi-Tool -- Soft Start?

I picked up one of these for $49.95 yesterday. When I got it home I
was surprised that it seems to have a soft-start function. The box
and instruction manual do not mention it; but there is a brief pause
when I turn it on and then it comes up to speed smoothly, similar to a
soft start router.

Normal?

RonB
  #2   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 1,134
Default HF Variable Speed Multi-Tool -- Soft Start?

On Jul 19, 10:01*am, RonB wrote:
I picked up one of these for $49.95 yesterday. *When I got it home I
was surprised that it seems to have a soft-start function. *The box
and instruction manual do not mention it; but there is a brief pause
when I turn it on and then it comes up to speed smoothly, similar to a
soft start router.

Normal?

RonB


Never mind. I finally found the right Google combination and
apparently it is normal.

RonB
  #3   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,861
Default HF Variable Speed Multi-Tool -- Soft Start?


"RonB" wrote in message
...
I picked up one of these for $49.95 yesterday. When I got it home I
was surprised that it seems to have a soft-start function. The box
and instruction manual do not mention it; but there is a brief pause
when I turn it on and then it comes up to speed smoothly, similar to a
soft start router.

Normal?

RonB


Could be an under powered motor struggling to come up to speed. If that
tends to go away with use things may have been too tight for the motor. I
really can not see a need for a soft start.


  #4   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 1,134
Default HF Variable Speed Multi-Tool -- Soft Start?

On Jul 19, 10:40*am, "Leon" wrote:
"RonB" wrote in message



Could be an under powered motor struggling to come up to speed. *If that
tends to go away with use things may have been too tight for the motor. *I
really can not see a need for a soft start.


I finally found a search combination on Google that got me to a few
related reviews and forum comments. It does have a "soft start"
feature that is described as anywhere from "nice" to "humorous". I
does take a few uses of the machine to get used to it. One rather
critical fellow said he starts it, goes to lunch, then comes back to
use it :^). Not quite that bad but it takes a full second or more to
come to speed.

RonB
  #5   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,861
Default HF Variable Speed Multi-Tool -- Soft Start?


"RonB" wrote in message
...
On Jul 19, 10:40 am, "Leon" wrote:
"RonB" wrote in message



Could be an under powered motor struggling to come up to speed. If that
tends to go away with use things may have been too tight for the motor. I
really can not see a need for a soft start.


I finally found a search combination on Google that got me to a few
related reviews and forum comments. It does have a "soft start"
feature that is described as anywhere from "nice" to "humorous". I
does take a few uses of the machine to get used to it. One rather
critical fellow said he starts it, goes to lunch, then comes back to
use it :^). Not quite that bad but it takes a full second or more to
come to speed.

RonB


If it works and you are satisfied that is all you need especially
considering the price. Wishing I had not needed the Fein 5 years ago...




  #6   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 1,134
Default HF Variable Speed Multi-Tool -- Soft Start?

On Jul 19, 11:20*am, "Leon" wrote:
"RonB" wrote in message

...
On Jul 19, 10:40 am, "Leon" wrote:

"RonB" wrote in message


Could be an under powered motor struggling to come up to speed. If that
tends to go away with use things may have been too tight for the motor. I
really can not see a need for a soft start.


I finally found a search combination on Google that got me to a few
related reviews and forum comments. *It does have a "soft start"
feature that is described as anywhere from "nice" to "humorous". *I
does take a few uses of the machine to get used to it. One rather
critical fellow said he starts it, goes to lunch, then comes back to
use it :^). *Not quite that bad but it takes a full second or more to
come to speed.

RonB

If it works and you are satisfied that is all you need especially
considering the price. *Wishing I had not needed the Fein 5 years ago....


Since I posted earlier this morning I have been in the garage playing
with it and various attachments, materials. Durability
notwithstanding, I think it is going to be a great tool to have,
probably one of those that will find new uses as I go on from here.
It appears to have plenty of power and I was very surprised at the
control. Their ads show someone doing rather precise cutting on
hardwood flooring and I had doubt. But with practice I think that
might be feasible, I saw a couple of complaints about noise that I
do not understand. Without an attachment, the tool is quiet. Cutting
through a piece of plywood scrap with the saw blade was noisy; but
that is the speaker-cone effect on the plywood.

Wish I had owned it a year or so ago when we were trimming door frames
in the new house.

RonB
  #7   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 607
Default HF Variable Speed Multi-Tool -- Soft Start?

On 07/19/2010 10:40 AM, Leon wrote:
wrote in message
...
I picked up one of these for $49.95 yesterday. When I got it home I
was surprised that it seems to have a soft-start function. The box
and instruction manual do not mention it; but there is a brief pause
when I turn it on and then it comes up to speed smoothly, similar to a
soft start router.

Normal?

RonB


Could be an under powered motor struggling to come up to speed. If that
tends to go away with use things may have been too tight for the motor. I
really can not see a need for a soft start.


Unless the motor is rather gutless and has no significant torque, I appreciate a soft start
feature in any hand-held power tool where the start-up torque might cause the tool to wrench
and twist in my hand. I don't like surprises.

--
Free bad advice available here.
To reply, eat the taco.
http://www.flickr.com/photos/bbqboyee/
  #8   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 3,287
Default HF Variable Speed Multi-Tool -- Soft Start?

On Jul 19, 11:20*am, "Leon" wrote:

If it works and you are satisfied that is all you need especially
considering the price. *Wishing I had not needed the Fein 5 years ago....


I am just the opposite. Had I known just how hand this little tool
could be, I would have plopped down the $275 they wanted for the
stripped down, no box, tool with one blade and a scraper version they
were selling at the time.

I have used the absolute crap out of this tool, and this $35 version
has paid for itself many times. Even the damn blades are good and
seem to last quite well. I never had any idea this tool was so
versatile.

I was put off by the price (remember when the variable speed kit with
box and accessories was $600 on Amazon?) but then the price of the
consumables got me, too. I couldn't see a stamped steel blade for $35
that would have to be replaced on a fairly regular basis. $8, I can
stand.

The longer I have it, I wonder how much time and money I would have
saved even paying full price for the Fein before their competition hit
the streets. Now it doesn't leave the truck.

Robert

  #9   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,861
Default HF Variable Speed Multi-Tool -- Soft Start?


wrote in message
...
On Jul 19, 11:20 am, "Leon" wrote:

If it works and you are satisfied that is all you need especially
considering the price. Wishing I had not needed the Fein 5 years ago...


I am just the opposite. Had I known just how hand this little tool
could be, I would have plopped down the $275 they wanted for the
stripped down, no box, tool with one blade and a scraper version they
were selling at the time.

I have used the absolute crap out of this tool, and this $35 version
has paid for itself many times. Even the damn blades are good and
seem to last quite well. I never had any idea this tool was so
versatile.

I was put off by the price (remember when the variable speed kit with
box and accessories was $600 on Amazon?) but then the price of the
consumables got me, too. I couldn't see a stamped steel blade for $35
that would have to be replaced on a fairly regular basis. $8, I can
stand.

The longer I have it, I wonder how much time and money I would have
saved even paying full price for the Fein before their competition hit
the streets. Now it doesn't leave the truck.

Robert


Don't get me wrong I love the Fein, I just wish I would have had the choices
of less expensive that todays market offers.


  #10   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 6,062
Default HF Variable Speed Multi-Tool -- Soft Start?

On Jul 20, 9:26*am, "Leon" wrote:
wrote in message

...
On Jul 19, 11:20 am, "Leon" wrote:

If it works and you are satisfied that is all you need especially
considering the price. Wishing I had not needed the Fein 5 years ago...


I am just the opposite. *Had I known just how hand this little tool
could be, I would have plopped down the $275 they wanted for the
stripped down, no box, tool with one blade and a scraper version they
were selling at the time.

I have used the absolute crap out of this tool, and this $35 version
has paid for itself many times. *Even the damn blades are good and
seem to last quite well. *I never had any idea this tool was so
versatile.

I was put off by the price (remember when the variable speed kit with
box and accessories was $600 on Amazon?) but then the price of the
consumables got me, too. *I couldn't see a stamped steel blade for $35
that would have to be replaced on a fairly regular basis. *$8, I can
stand.

The longer I have it, I wonder how much time and money I would have
saved even paying full price for the Fein before their competition hit
the streets. *Now it doesn't leave the truck.

Robert

Don't get me wrong I love the Fein, I just wish I would have had the choices
of less expensive that todays market offers.


When I sold my countertop company, everything went along with it.
I have a lot of projects which require tools. Darnitall.
I bought the cheap multitool... and would under no circumstances buy a
Fein at this stage of the game. But I did buy one years ago, and it
made me a lot more efficient. Great tool. (Imagine taking out a
countertop by cutting it with a jigsaw, grabbing the Fein and cutting
that last 2 inches to the wall...THAT alone saved me countless hours
and damaged walls.
I am amazed how good those 8 dollar blades are.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to bypass dremel tool internal variable speed control? [email protected] Electronics Repair 125 July 17th 20 08:12 PM
Confused about multi stage or variable speed furnace with non variable condensor scorpionleather Home Repair 3 September 29th 08 03:38 PM
Variable speed fan John UK diy 3 April 25th 08 05:37 AM
Variable speed ROS alexy Woodworking 5 January 1st 06 03:22 AM
Drill Press: variable speed vs. multi-speed TheNewGuy Woodworking 22 November 24th 05 02:32 AM


All times are GMT +1. The time now is 09:57 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"