Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Shrumishi
 
Posts: n/a
Default IPE source in Wisconsin

Greetings.

I am planning on building a deck this summer out of Ipe.
Unfortunately, I haven't been able to find a local source for the
wood. I live in the Milwaukee-Waukesha area, and if anyone could clue
me in on who carries it, I would appreciate it.

Dale.
  #2   Report Post  
Leon
 
Posts: n/a
Default IPE source in Wisconsin

Have you checked with the local companies that build decks?


"Shrumishi" wrote in message
om...
Greetings.

I am planning on building a deck this summer out of Ipe.
Unfortunately, I haven't been able to find a local source for the
wood. I live in the Milwaukee-Waukesha area, and if anyone could clue
me in on who carries it, I would appreciate it.

Dale.



  #3   Report Post  
Bob Schmall
 
Posts: n/a
Default IPE source in Wisconsin

Dale:
Valley USA
42nd and Forest Home
414-281-8721

Bob Schmall

"Shrumishi" wrote in message
om...
Greetings.

I am planning on building a deck this summer out of Ipe.
Unfortunately, I haven't been able to find a local source for the
wood. I live in the Milwaukee-Waukesha area, and if anyone could clue
me in on who carries it, I would appreciate it.

Dale.



  #4   Report Post  
Eric Johnson
 
Posts: n/a
Default IPE source in Wisconsin


Try these guys in Waukesha

http://www.boehm-madisen.com/


  #5   Report Post  
Unisaw A100
 
Posts: n/a
Default IPE source in Wisconsin

Shrumishi wrote:
I am planning on building a deck this summer out of Ipe.
Unfortunately, I haven't been able to find a local source for the
wood. I live in the Milwaukee-Waukesha area, and if anyone could clue
me in on who carries it, I would appreciate it.



If I'm not mistaken Ironwood Holdings (of Milwaukee) is the
(or one of the) sole importer(s) for ipe. You might want to
track them down via the telephone and see if they sell
retail or who they distribute to.

UA100

P.S. Boehm only sells wholesale/commercial.


  #7   Report Post  
Bob Gramza
 
Posts: n/a
Default IPhttp://www.badgerwood.com/products.htmlE source in Wisconsin

http://www.badgerwood.com/products.html



"Shrumishi" wrote in message
om...
: Greetings.
:
: I am planning on building a deck this summer out of Ipe.
: Unfortunately, I haven't been able to find a local source for the
: wood. I live in the Milwaukee-Waukesha area, and if anyone could clue
: me in on who carries it, I would appreciate it.
:
: Dale.


  #8   Report Post  
Shrumishi
 
Posts: n/a
Default IPE source in Wisconsin

I called Boehm-Madisen and they actually recommended Neu's Supply Line
in Germantown. They wound up having a fairly good selection and 5/4 x
6 x 12' is only $24. $2 per lf is the best I've seen.

Thanks for all your input.

(Shrumishi) wrote in message . com...
Greetings.

I am planning on building a deck this summer out of Ipe.
Unfortunately, I haven't been able to find a local source for the
wood. I live in the Milwaukee-Waukesha area, and if anyone could clue
me in on who carries it, I would appreciate it.

Dale.

  #9   Report Post  
Todd Neidinger
 
Posts: n/a
Default IPE source in Wisconsin

Try:
Woodworkers Supply
1013 Jonathon Dr.
Madison, Wi
608-273-4418

Shrumishi wrote:
I called Boehm-Madisen and they actually recommended Neu's Supply Line
in Germantown. They wound up having a fairly good selection and 5/4 x
6 x 12' is only $24. $2 per lf is the best I've seen.

Thanks for all your input.

(Shrumishi) wrote in message . com...

Greetings.

I am planning on building a deck this summer out of Ipe.
Unfortunately, I haven't been able to find a local source for the
wood. I live in the Milwaukee-Waukesha area, and if anyone could clue
me in on who carries it, I would appreciate it.

Dale.

  #11   Report Post  
Lazarus Long
 
Posts: n/a
Default IPE source in Wisconsin

On Thu, 19 Feb 2004 05:10:59 GMT, Rick Chamberlain
wrote:


Worzella lumber. Ask for Charlie. Great service, selection, and price.
No, I don't work there, but I did get my deck materials (including the
ipe and eb-tys) from them.


I'd forgotten about them until you posted this. The last time I went
there they were still in that series of barns a couple of miles east
of their present location. At the time, I bought several planks of
12/4 maple that came from a large stack they had in yet another place.

Where abouts are you located Rick?
  #13   Report Post  
Lazarus Long
 
Posts: n/a
Default IPE source in Wisconsin

On Thu, 19 Feb 2004 17:46:02 GMT, Rick Chamberlain
wrote:

In article ,
says...



Where abouts are you located Rick?

Worzella now stores the ipe in sheds directly behind the main office.
You have to go through the gates to get there. Last time I was there
for ipe was last summer, and they had a pretty good selection, including
4x4s.

I'm in New Berlin - not far from Worzella actually. I just wish they
carried untreated SYP.

BTW, what price did you get on the maple? How did it compare to Kettle
Moraine?


I don't remember the price paid. It's been a long time. I think the
planks of really thick hard maple I've gotten from Kettle Moraine are
better, but this is colored by opening up one of those thick Worzella
planks and finding a big 'ol bark pocket in the center. Otherwise,
pretty much the same.


Thing is, Kettle Moraine is along the way home. It's hardly any
effort to go there. I notice that they're selling quite a bit of
exotics now. Not that I'll be making a bed out of Bolivian Rosewood.

And I really like KM's thickness sander. No setup charge and only a
buck a minute.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
source for extra wide hand truck?? Jim Booth Metalworking 3 February 12th 04 08:54 PM
Pearl Harbor Walt LeRoy Metalworking 77 December 15th 03 06:36 AM
Source for GOOD bolts, washers, copper washers, etc? Miki Kanazawa Metalworking 3 October 6th 03 11:45 PM


All times are GMT +1. The time now is 11:47 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"