I'd like to know what screw patterns various routers use in preparation
for a router table I'm building. Is there somewhere that has maybe .pdf
files with the screw patterns? Any table of equivalent patterns? Reason
for asking: I have an old, nameless, 3hp router that runs well. I'd
rather use it for now, and save the pc 7518/Triton purchase for later.
I'd like to avoid buying 2 or more router plates, so I'd like to be able
to compare the different patterns. It's entirely possible that this old
cheap thing has a pattern similar to the pc or triton or X. Any input?

Thanks,
Tim

Extraneous info you may or may not be interested in: I'm building norm's
table. I'll be using some fairly nice and expensive hardwood on it, and
probably a corian top, so it should be a beaut. Bet you're scratching
your head now about the cheap router, but I'm building a house, so
money's tight and I already have the expensive bits

Email is real, should you wish to contact me privately.

On Sat, 24 May 2008 07:25:18 GMT, Tim wrote:

I'd like to know what screw patterns various routers use in preparation
for a router table I'm building. Is there somewhere that has maybe .pdf
files with the screw patterns? Any table of equivalent patterns? Reason
for asking: I have an old, nameless, 3hp router that runs well. I'd
rather use it for now, and save the pc 7518/Triton purchase for later.
I'd like to avoid buying 2 or more router plates, so I'd like to be able
to compare the different patterns. It's entirely possible that this old
cheap thing has a pattern similar to the pc or triton or X. Any input?

Thanks,
Tim

Tim:

You might want to consider getting a piece of Lexan and drilling it
out to fit the various hole patterns that you may be using. That way
you will have a single base that fits all the routers.



Regards,

Tom

Thos.J.Watson - Cabinetmaker
tjwatson1ATcomcastDOTnet
www.home.comcast.net/~tjwatson1

Tim:

You might want to consider getting a piece of Lexan and drilling it out
to fit the various hole patterns that you may be using. That way you
will have a single base that fits all the routers.



Regards,

Tom

Thos.J.Watson - Cabinetmaker
tjwatson1ATcomcastDOTnet
www.home.comcast.net/~tjwatson1

Definitely can do that, and rockler (which is who provided norm with his
plate for the router station) offers a solid plate to be drilled to fit
your oddball router. But I'd rather not have to drill it. I'd prefer to
get one that will fit both my cheapo and a pc 7518. I think that may be
doable, as the pattern looks very similar from what i've seen looking at
base plates online. There has to be somebody who has done this before.
Surely there's some minor standardization between companies.

The cheap router is a HF special I think, chicago electric. It's 3hp i
believe. Bearings are decent, no play up or down, so it will do for a
router table for the time being I think. Only complaint is the lack of a
self releasing collet.

All that said, though.. I may wind up buying the plate for the router I
intend to get later, cutting the table to fit it, then cutting a lexan
plate to fit the table for use with the junker. Which of course leads to
this fine question I'm sure there won't be a flame over .... Triton or
pc?

Why not remove the base plate from your present router and take it to
Rockler or some other tool store and see if it matches with any of the
routers you hope to buy in the future.

However, if it is not an exact match with any of the ones you like, you're
probably better off planning to buy the one that is least like your present
router. That way, if you buy the plate for your future router and drill it
to conform to your present one, you stand less chance of having two holes
that are almost but not quite on top of each other.

Lee

--
To e-mail, replace "bucketofspam" with "dleegordon"

_________________________________
Lee Gordon
http://www.leegordonproductions.com

On Sat, 24 May 2008 20:04:12 -0400, Lee Gordon wrote:

Why not remove the base plate from your present router and take it to
Rockler or some other tool store and see if it matches with any of the
routers you hope to buy in the future.


The closest thing in this state to a real woodworking store is probably
not much better than lowe's or home depot. I'm in mississippi, and not in
the more populated areas. I could possibly get my hands on a triton, but
I'm unaware of anyone within 100 miles or so that stocks a pc 7518. Or
_any_ router plates. I guess my answer is just get a blank and drill it
myself, I was just hoping for a quick archive of router base patterns
somewhere. Not an easy thing to search google for. (router base template?
router base pattern?)

Thanks, all the same

Tim

Tim,

I may be crazy, but I recall seeing a .pdf of the Bench Dog router plate
drilling template somewhere online recently. Usually, I would have saved
either the .pdf file or the link to it. I've checked my PC and can't seem to
find either of them.

As I recall, it was one of the Australian websites or groups. If I find it,
I'll post a link or the file. Perhaps someone else in the group has seen it
or knows where to find it?

Sorry that I couldn't be of any help.

Peter.

"Tim" wrote in message
. ..
I'd like to know what screw patterns various routers use in preparation
for a router table I'm building. Is there somewhere that has maybe .pdf
files with the screw patterns? Any table of equivalent patterns? Reason
for asking: I have an old, nameless, 3hp router that runs well. I'd
rather use it for now, and save the pc 7518/Triton purchase for later.
I'd like to avoid buying 2 or more router plates, so I'd like to be able
to compare the different patterns. It's entirely possible that this old
cheap thing has a pattern similar to the pc or triton or X. Any input?

Thanks,
Tim

Extraneous info you may or may not be interested in: I'm building norm's
table. I'll be using some fairly nice and expensive hardwood on it, and
probably a corian top, so it should be a beaut. Bet you're scratching
your head now about the cheap router, but I'm building a house, so
money's tight and I already have the expensive bits

Email is real, should you wish to contact me privately.