Let me say upfront. I don't know what makes a piece of furniture valuable
or an "heirloom." But I bought this months edition of Woodsmith and in it
is a plan for a chest of drawers with the casing made of plywood. There
were other items with plywood also.

Doesn't "real" fancy furniture that becomes and anitque or and heirloom have
a solid wood base and case? Doesn't plywood make it "cheap." Sorry if this
offends some of you. I really just am curious if solid wood could be used
as a substitute for the plywood an give it real lasting value. But I am
sure that would make it cost much more to build. How much I don't know.

Thanks for commenting.

Sat, Aug 30, 2003, 10:24pm (EDT+4) (jm) who is
honest enough to admit:
Let me say upfront. I don't know what makes a piece of furniture
valuable

Judging from by most of what I've seen listed for big bucks, it
usually means finding a sucker, with money.

or an "heirloom."

This is usually misused. Here is what the dictionary says:
heirloom n 1: (law) any property that is considered by law or custom as
inseparable from an inheritance is inherited with that inheritance 2:
something that has been in a family for generations

But I bought this months edition of Woodsmith and in it is a plan for a
chest of drawers with the casing made of plywood. There were other items
with plywood also.
Doesn't "real" fancy furniture that becomes and anitque or and heirloom
have a solid wood base and case?

As far as plywood, here is a partial quote:
Bent Ply is the first book devoted to plywood in modern design. It
consists of two parts: the first, an illustrated history of plywood
(tracing its origins to ancient Egypt, circa 2900 BC);
Quoted from he http://www.nzia.co.nz/site/story.asp?bid=0&storyid=847

I don't figure you get much more antiquey then old Egyptian
furniture, it's usually pretty fancy too. Way I figure it, if the
people that made the stuff that are antiques today had plyowod, they
would have used it, same as electricity and power tools, instead of hand
tools.

Doesn't plywood make it "cheap.

Not judging by what some people charge. And, price some antique
Egyptian furniture.

" Sorry if this offends some of you.

Maybe some of the too tight people, but who cares about them?
Not me, I like plywood. They made bombers and PT boats from it in WWII,
and you can make anything from a yacht to fine furniture with it. Great
stuff.

I really just am curious if solid wood could be used as a substitute for
the plywood an give it real lasting value.

It would have snob appeal anyway, but yes, some times solid wood
could be sutstituted, other times plywood would be more appropriate.
Depends.

But I am sure that would make it cost much more to build. How much I
don't know.

If it's cost that stops you, then use more inexpensive materials,
or make smaller projects. Find something that sells, make enough money
to buy more materials, more expensive materials, and go from there.
Anyway, it's a Hell of a lot cheaper to make somehing you have never
made, and make some mistakes, out of poplar, or some other relatively
inexpensive wood, then to try the same thing out of expensive wood, and
then screw it up.

JOAT
No sense in being pessimistic - it wouldn't work anyway.

Life just ain't life without good music. - JOAT
Web Page Update 30 Aug 2003. Some tunes I like.
http://community-2.webtv.net/Jakofal...OMETUNESILIKE/

For entertainment centers, I use plywood for the carcase. And, I guess a
well built piece of furniture made with plywood could be passed on to future
generations and be considered of high quality, but it doesn't quite have the
look and feel of solid wood. Personally, for furniture, if it is for
myself, or the person who commissioned it is willing to pay extra, it is
always solid wood.

Preston
"jm" wrote in message
news:Su94b.309637$Ho3.43463@sccrnsc03...
Let me say upfront. I don't know what makes a piece of furniture valuable
or an "heirloom." But I bought this months edition of Woodsmith and in it
is a plan for a chest of drawers with the casing made of plywood. There
were other items with plywood also.

Doesn't "real" fancy furniture that becomes and anitque or and heirloom
have
a solid wood base and case? Doesn't plywood make it "cheap." Sorry if
this
offends some of you. I really just am curious if solid wood could be used
as a substitute for the plywood an give it real lasting value. But I am
sure that would make it cost much more to build. How much I don't know.

Thanks for commenting.

The advantage of plywood lies in ease of design and construction, not
necessarily price. For example, I can get solid 4/4 walnut cheaper than 3/4
walnut plywood. But then I have to design for wood movement with solid
wood. Good plywood furniture can be more durable than poorly designed solid
wood furniture. But I do use solid wood for really fine furniture.
However, most customers want plywood because of labor costs. Plywood goes
together much faster. harrym

"jm" wrote in message
news:Su94b.309637$Ho3.43463@sccrnsc03...
Let me say upfront. I don't know what makes a piece of furniture valuable
or an "heirloom." But I bought this months edition of Woodsmith and in it
is a plan for a chest of drawers with the casing made of plywood. There
were other items with plywood also.

Doesn't "real" fancy furniture that becomes and anitque or and heirloom
have
a solid wood base and case? Doesn't plywood make it "cheap." Sorry if
this
offends some of you. I really just am curious if solid wood could be used
as a substitute for the plywood an give it real lasting value. But I am
sure that would make it cost much more to build. How much I don't know.

Thanks for commenting.

Hi John

Well, if you mean to say the heirloom in the sense built as they use
to build it - then yes, using a plywood is a no no. If that's not
what you mean, plywood - typically veneer plywood - can be the better
wood choice to make. Plywood doesn't change its dimension as much as
real wood (being made up of wood in different orientations - the
expansion/contractions kind of cancel out)- is more stable (since you
would probably have to glue up pieces to make the sizable panels) -
and per board ft, probably cost less. So, you can make a better piece
of furnitue, that will probably outlive you, and become the heirloom
piece in your family.

I just made a coffe table, and I choosed a glue'd up oak for the top,
pretty much veeneer plywood for the rest. Even, as I made it, the top
was warping a little bit, while the plywood was as flat as can be. I
edged the plywood with oak strips, and I think it looks pretty good.

I didn't do any of that fancy "floating" joinery where you let the
wood more or less float on top of the rest of the table - using "break
board" edges and oblong screwholes to let the wood expand. I'm half
expecting to see that top - pop off one of these days as its only
dadoe and glued to the rest of the table. So, well see how good the
"real wood" does.

At my level of comfort and expertise, I stick with solid wood for the
small parts or "show" part and plywood for the rest.

Ever seen an antique, museum piece with veneered sides and top? The basic
principles are virtually identical with using ply's of wood (plywood) to
gain dimensional stability on certain parts or assemblies, particularly when
adding inlay patterns.

IMO, quality plywood, properly cut and correctly used, in no way cheapens a
piece any more than "veneer" does.

I just finished a walnut coffee table for a customer. The top, eight sided,
has a 1/4" strip of cherry between the 1/2" thick walnut edge and the walnut
plywood top. It would have been very difficult to make this work without the
dimensional stability of a plywood or veneered top. A solid wood top would
just about guarantee gaps in the "inlay" at the joints within the first
year.

There is undoubtedly much value in the material, but a "solid wood" piece
that falls apart in 10 years will have no value, regardless of the material.

BTW, be careful what you call "solid wood" ... most furniture stores class
plywood as "solid wood" these days, just as they would veneer.

--
www.e-woodshop.net
Last update: 8/24/03


"jm" wrote in message
Let me say upfront. I don't know what makes a piece of furniture valuable
or an "heirloom." But I bought this months edition of Woodsmith and in it
is a plan for a chest of drawers with the casing made of plywood. There
were other items with plywood also.

Doesn't "real" fancy furniture that becomes and anitque or and heirloom
have
a solid wood base and case? Doesn't plywood make it "cheap." Sorry if
this
offends some of you. I really just am curious if solid wood could be used
as a substitute for the plywood an give it real lasting value. But I am
sure that would make it cost much more to build. How much I don't know.

"Swingman" wrote in message
news.com...
Ever seen an antique, museum piece with veneered sides and top? The basic
principles are virtually identical with using ply's of wood (plywood) to
gain dimensional stability on certain parts or assemblies, particularly
when
adding inlay patterns.

IMO, quality plywood, properly cut and correctly used, in no way cheapens
a
piece any more than "veneer" does.

I just finished a walnut coffee table for a customer. The top, eight
sided,
has a 1/4" strip of cherry between the 1/2" thick walnut edge and the
walnut
plywood top. It would have been very difficult to make this work without
the
dimensional stability of a plywood or veneered top. A solid wood top would
just about guarantee gaps in the "inlay" at the joints within the first
year.

There is undoubtedly much value in the material, but a "solid wood" piece
that falls apart in 10 years will have no value, regardless of the
material.

This is a good point. If it isn't there, what good is it?


BTW, be careful what you call "solid wood" ... most furniture stores class
plywood as "solid wood" these days, just as they would veneer.

I guess when I picture plywood I see some nasty stuff from Home Depot next
to the two by fours. Is the plywood used in furniture different from "that"
stack? (I know there are several stacks, but I hope you understand what I
mean.)

jm wrote:

Doesn't "real" fancy furniture that becomes and anitque or and heirloom

I just confirmed that the definition of "antique" means something at least
100 years old. I don't have any "antiques" but I have a lot of heirloom
furniture passed down from various relatives, some still living, some not.

My bedroom furniture is some pretty garish stuff, and I have no idea whether
it was considered "fancy" or "cheap" in its day, but I can imagine that
furniture like this would be exhorbitantly expensive today. Dovetails,
wooden drawer glides, and similar details are typical.

The headboard, night stands, dresser and chifferobe are all feature a curved
front panel that's made out of kerfed, veneered plywood. All the pieces
are veneered with primarily mahogany (I'm guessing), with bits and pieces
of other colorful woods inlaid in intricate but ugly patterns. Under this
layer, there's another band of fake black and yellow burlish looking stuff
that is a *decal*. If you look closely, you can see the dots of ink. The
pulls are all brass plated pot metal with amber plastic inserts, and the
mirror had bands of inlaid amber colored mirrors that had fallen out.

I know how the curves are made because the veneer was peeling off the
footboard rather horribly. I removed it and tried to glue some red oak
veneer onto it (because red oak was available) and boy did that turn out
horrible. One of these days I have to figure out how to match the mahogany
or whatever, figure out how to get all that stupid contact cement off of
the thing, and re-do it right. Or else accidentally throw it all away.

I have no idea exactly how old it is, who made it, how expensive it was, or
where it was purchased. It belonged to my great aunt. By the look of the
stuff, I would guess it was made during one of America's most tasteless
periods, though it might have been manufactured during a time when people
were making cheap imitations of furniture from that period out of
nostalgia, much as hideous hip huggers are being worn by kids today. (I
have yet to see a female posterior that's the slightest bit attractive when
clad in those damnable things.)

Anyway, call it '50s at the young end, and maybe '20s at the old end. It's
a lot older than I am either way, and while it is well put-together, it's
definitely made from non-solid materials. There's nothing solid about the
stuff.

--
Michael McIntyre ---- Silvan
Linux fanatic, and certified Geek; registered Linux user #243621
Confirmed post number: 17445 Approximate word count: 523350
http://www.geocities.com/Paris/Rue/5407/

Silvan writes:


[...]

but evidently some of the stuff we brought in at work is using a new
technique where they unroll a log in a long, continuous sheet instead of
sawing it more conventionally.

This is not exaxctly a new technique, it dates back at least as far as
the middle of last century, in german it's called "Schälfurnier".

--
Dr. Juergen Hannappel http://lisa2.physik.uni-bonn.de/~hannappe
Phone: +49 228 73 2447 FAX ... 7869
Physikalisches Institut der Uni Bonn Nussallee 12, D-53115 Bonn, Germany
CERN: Phone: +412276 76461 Fax: ..77930 Bat. 892-R-A13 CH-1211 Geneve 23

I guess when I picture plywood I see some nasty stuff from Home Depot next
to the two by fours.

Lowes does have nicer playwood. I got some "oak" plywood that does have a
nice
veneer

Cabinet grade plywood, like construction grade plywood, comes in many types.
The quality of the face veneers are graded from 1A to 4D. (or it's A1 to D4.
I can never remember that.) The oak plywood I recently saw in HD was a 3C
grade. If you want truly nice plywood, you need to go to either a real
lumberyard or a cabinet makers supply shop. The cabinet supply shop will
usually have the best selection and prices.

As others have said, there are plenty of heirlooms and fine antique pieces that
have plywood. Often the furniture makers would make their own.

When I bought my house, the previous owners left a very nice highboy dresser in
the garage, where it had been for 13 years. This dresser, which was probably
made in the 1940's or 50's, has cabriole legs, a shell carving, and curved
molding and finials at the top. It's made from solid mahogany and mahogany
veneer plywood. I couldn't use it inside the house, so for 9 years I used it
to hold tools. I recently gave it to a friend who paid to have it
proffesionally restored. His daughter already has her eye on it. While it is
not technically an antique today, it will probably be one in her lifetime.

David

remove the key to email me.

Juergen Hannappel wrote:

but evidently some of the stuff we brought in at work is using a new
technique where they unroll a log in a long, continuous sheet instead of
sawing it more conventionally.

This is not exaxctly a new technique, it dates back at least as far as
the middle of last century, in german it's called "Schälfurnier".

I didn't know that. The boss was going on and on about it like it was
something that just got invented 10 years ago.

--
Michael McIntyre ---- Silvan
Linux fanatic, and certified Geek; registered Linux user #243621
Confirmed post number: 17461 Approximate word count: 523830
http://www.geocities.com/Paris/Rue/5407/

"Gfretwell" wrote in message
...
I guess when I picture plywood I see some nasty stuff from Home Depot
next
to the two by fours.

Lowes does have nicer playwood. I got some "oak" plywood that does have a
nice
veneer but it seems to only be about 1/32" thick. A little sanding will
scrub
it off.

Here's a really newbie questin. What is veneer?

Here's a really newbie questin. What is veneer?


ve·neer

noun (plural ve·neers)

1. industry thin layer as surface: a thin layer of a material fixed to
the surface of another material that is of inferior quality or less
attractive


2. industry layer of plywood: any of the layers of wood that are glued
together to make plywood


3. industry building outer layer: an outer layer fixed to something
for decoration or protection, for example, a facing of stone on a brick
building


4. deceptive appearance: an outward appearance that is meant to please
or impress others but that is false or only superficial

as per msn.encarta.com

Jack

--
We herd sheep, we drive cattle, we lead people. Lead me, follow me, or get
out of my way.
General Geo. S. Patton

I used to think heirloom meant solid wood only, and that's how I build
'furniture' (i.e., shop cabinets are plywood all the way). We may
equate heirloom to solid wood because that's what's available. A
hundred or two years from now, heirloom may equal plywood if
everything else is made from MDF.

However, I got a chest of drawers that was made in my
great-grandfather's lumber mill, I'd guess 1930s (my dad didn't know)
and it has plywood back and drawer bottoms. I consider it an
heirloom piece because of the family history.

So maybe if you plan to hand it down to your descendants, looks will
matter over materials. If you want it to sell for high $ in the
antiques market ;0) it'll have to be solid wood to be heirloom.

Either way you won't be around to know what folks think of your
handiwork, so build what you think is best.

Heirloom furniture with plywood?

Sun, Aug 31, 2003, 4:46pm (EDT+4) (jm) asks:
Here's a really newbie questin. What is veneer?

Here's a really oldie way to find out.
http://www.google.com/

JOAT
No sense in being pessimistic - it wouldn't work anyway.

Life just ain't life without good music. - JOAT
Web Page Update 30 Aug 2003. Some tunes I like.
http://community-2.webtv.net/Jakofal...OMETUNESILIKE/

On Sun, 31 Aug 2003 12:22:36 -0400, Silvan
scribbled

Juergen Hannappel wrote:

but evidently some of the stuff we brought in at work is using a new
technique where they unroll a log in a long, continuous sheet instead of
sawing it more conventionally.

This is not exaxctly a new technique, it dates back at least as far as
the middle of last century, in german it's called "Schälfurnier".

I didn't know that. The boss was going on and on about it like it was
something that just got invented 10 years ago.

In English, it's called "rotary cut" veneer (like unrolling toilet
paper). Most construction plywood veneers are cut that way, as well as
most red oak plywood and some other woods. Many good quality hardwood
veneers (not all) are also sliced using a knife, but a using
half-round, quarter, rift or flat slicing. I don't think saw-cut
veneers are commercially available any longer. The following page
shows the different methods of slicing veneer and will test your Linux
ingenuity as it uses Quicktime. :-)

http://www.commonwealthplywood.com/e...r/index.shtml#

You might go here also, which has static pictures.

http://www.tapeease.com/typesof.htm

or

http://www.forestplywood.com/veneer.htm


Luigi
Replace "no" with "yk" twice
in reply address for real email address

Luigi Zanasi wrote:

veneers are commercially available any longer. The following page
shows the different methods of slicing veneer and will test your Linux
ingenuity as it uses Quicktime. :-)

Feh, you mean click the links and watch the movies? Got that covered.

Guess I'll go waste a bit of time learning about veneer...

--
Michael McIntyre ---- Silvan
Linux fanatic, and certified Geek; registered Linux user #243621
Confirmed post number: 17472 Approximate word count: 524160
http://www.geocities.com/Paris/Rue/5407/

Heck man if you had a piece of paper towel that was your great great great
great grandfathers, wouldnt it be priceless to you and your family? That's
what makes it valuable. What if George washington made a dresser out of
plywood. Heck yeah it'd be valuable.

Sam

"jm" wrote in message
news:Su94b.309637$Ho3.43463@sccrnsc03...
Let me say upfront. I don't know what makes a piece of furniture valuable
or an "heirloom." But I bought this months edition of Woodsmith and in it
is a plan for a chest of drawers with the casing made of plywood. There
were other items with plywood also.

Doesn't "real" fancy furniture that becomes and anitque or and heirloom
have
a solid wood base and case? Doesn't plywood make it "cheap." Sorry if
this
offends some of you. I really just am curious if solid wood could be used
as a substitute for the plywood an give it real lasting value. But I am
sure that would make it cost much more to build. How much I don't know.

Thanks for commenting.

Sam Hopkins responds:

Heck man if you had a piece of paper towel that was your great great great
great grandfathers, wouldnt it be priceless to you and your family? That's
what makes it valuable. What if George washington made a dresser out of
plywood. Heck yeah it'd be valuable.


More so since today's concept of plywood didn't exist then. Pre-configured?

"jm" wrote in message
news:Su94b.309637$Ho3.43463@sccrnsc03...
Let me say upfront. I don't know what makes a piece of furniture valuable
or an "heirloom." But I bought this months edition of Woodsmith and in it
is a plan for a chest of drawers with the casing made of plywood. There
were other items with plywood also.

Doesn't "real" fancy furniture that becomes and anitque or and heirloom
have
a solid wood base and case? Doesn't plywood make it "cheap." Sorry if
this
offends some of you.

Take a look at veneers and inlays. Then talk about cheap.

Charlie Self

"Men willingly believe what they wish."
Julius Caesar, De Bello Gallico

Heck, in 20 years, anything from this era not made of particle board
will
be considered an heirloom ha ha ha.. I mean, solid wood furniture
kicks ass, most definitely, but there's some nice things I've made
from plywood. Shouldn't the goal be to make yourself happy? Isn't
that what this hobby is all about. Instead of worrying about what
others think, how about going down to the shop tonight and kicking
some plywood ass! Have fun with it. Who cares
if people admire your work after you're dead?




"jm" wrote in message news:Su94b.309637$Ho3.43463@sccrnsc03...
Let me say upfront. I don't know what makes a piece of furniture valuable
or an "heirloom." But I bought this months edition of Woodsmith and in it
is a plan for a chest of drawers with the casing made of plywood. There
were other items with plywood also.

Doesn't "real" fancy furniture that becomes and anitque or and heirloom have
a solid wood base and case? Doesn't plywood make it "cheap." Sorry if this
offends some of you. I really just am curious if solid wood could be used
as a substitute for the plywood an give it real lasting value. But I am
sure that would make it cost much more to build. How much I don't know.

Thanks for commenting.

On 09 Sep 2003 23:40:54 GMT, otforme (Charlie Self)
wrote:

Sam Hopkins responds:

What if George washington made a dresser out of
plywood. Heck yeah it'd be valuable.


More so since today's concept of plywood didn't exist then. Pre-configured?


George didn't shop at Ikea? G

Barry