Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
What wood for spoon?
I have a large wooden cooking spoon. Nothing happens to it when you toss
it in the dishwasher (other then getting clean...), but it is maybe 10 years old and starting to show its age. I made one out of walnut, but it gets pretty ratty after one washing. What wood is good for this purpose? The one I have looks like ash, but is probably some Asian wood. |
#2
Posted to rec.woodworking
|
|||
|
|||
What wood for spoon?
In article , "Toller" wrote:
I have a large wooden cooking spoon. Nothing happens to it when you toss it in the dishwasher (other then getting clean...), but it is maybe 10 years old and starting to show its age. I made one out of walnut, but it gets pretty ratty after one washing. What wood is good for this purpose? The one I have looks like ash, but is probably some Asian wood. Beech is the standard. -- Regards, Doug Miller (alphageek at milmac dot com) It's time to throw all their damned tea in the harbor again. |
#3
Posted to rec.woodworking
|
|||
|
|||
What wood for spoon?
On Fri, 08 Dec 2006 00:35:40 GMT, "Toller" wrote:
I have a large wooden cooking spoon. Nothing happens to it when you toss it in the dishwasher (other then getting clean...), but it is maybe 10 years old and starting to show its age. I made one out of walnut, but it gets pretty ratty after one washing. What wood is good for this purpose? The one I have looks like ash, but is probably some Asian wood. I like tight-grain rock maple, but I also never run them through the dishwasher. -- "We need to make a sacrifice to the gods, find me a young virgin... oh, and bring something to kill" Tim Douglass http://www.DouglassClan.com |
#4
Posted to rec.woodworking
|
|||
|
|||
What wood for spoon?
"Toller" wrote in message ... I have a large wooden cooking spoon. Nothing happens to it when you toss it in the dishwasher (other then getting clean...), but it is maybe 10 years old and starting to show its age. I made one out of walnut, but it gets pretty ratty after one washing. What wood is good for this purpose? The one I have looks like ash, but is probably some Asian wood. I have two thoughts on this. One, is that wooden spoons are cheap and plentiful and you could easily pick up some wood spoons at many stores near you. Secondly, this is a small enough job, you could just experiment. Try different woods. Have fun with it. It isn't like a big investment in wood or time. See what you come up with. Any surplus could end up as christmas presents. Remember the PBS series about the guy who built a cabin in Alaska and lived there for many years? He just grabbed some wood he chopped down and started splitting and carving. He produced a big wooden spoon very quickly. This was immediately pressed into service as an overall cooking and eating implement. I wonder how many years that hand carved spoon served him in this wilderness setting. |
#5
Posted to rec.woodworking
|
|||
|
|||
What wood for spoon?
On Fri, 08 Dec 2006 00:35:40 GMT, "Toller" wrote:
I have a large wooden cooking spoon. Nothing happens to it when you toss it in the dishwasher (other then getting clean...), but it is maybe 10 years old and starting to show its age. I made one out of walnut, but it gets pretty ratty after one washing. What wood is good for this purpose? The one I have looks like ash, but is probably some Asian wood. What's a'matta you Why you look so sad Whaddayou think you do Why you feel so bad It's a nice'a day It's a nice'a place Ahh, shuddupayouface Buy the Olive wood spoon. (apologies, sorta, to Joe Dolce) Regards, Tom Watson tjwatson1ATcomcastDOTnet (real email) http://home.comcast.net/~tjwatson1/ |
#6
Posted to rec.woodworking
|
|||
|
|||
What wood for spoon?
On Fri, 08 Dec 2006 00:35:40 +0000, Toller wrote:
I have a large wooden cooking spoon. Nothing happens to it when you toss it in the dishwasher (other then getting clean...), but it is maybe 10 years old and starting to show its age. I made one out of walnut, but it gets pretty ratty after one washing. What wood is good for this purpose? The one I have looks like ash, but is probably some Asian wood. Hereabouts I'd go by the two yards in the area with a reasonable stock of exotics and explain what I was about and obtain some cutoffs of everything they have, make a sample out of each (not a spoon, just cut them to a standard size and run them through the planer), toss them all in the diswasher and see what survived best, then plug the FPL database and see if they had any toxicity information and once I'd figured out what to use get a board and have at it. -- --John to email, dial "usenet" and validate (was jclarke at eye bee em dot net) |
#7
Posted to rec.woodworking
|
|||
|
|||
What wood for spoon?
I made one out of walnut, but it gets pretty ratty after one washing.
Don't have any idea whether this will work, but if the dishwasher is producing a raised-grain effect, you might try sanding down the spoon, washing it again, and sanding it again. As I understand grain raising, it should get less ratty every time until it pretty much stays the same. If I'm off base on this, I'm sure someone will correct me. It sure wouldn't hurt to try, though. I do know that bamboo tends to stay nice and smooth even after several cookings and washings, but of course it's not available at most local lumberyards... Try some experiments, have fun with it, and let us know what works, Andy |
#8
Posted to rec.woodworking
|
|||
|
|||
What wood for spoon?
My best wooden spoons are made of olive wood.
Lee -- To e-mail, replace "bucketofspam" with "dleegordon" _________________________________ Lee Gordon http://www.leegordonproductions.com |
#9
Posted to rec.woodworking
|
|||
|
|||
What wood for spoon?
"Andy" wrote in message ps.com... I made one out of walnut, but it gets pretty ratty after one washing. Don't have any idea whether this will work, but if the dishwasher is producing a raised-grain effect, you might try sanding down the spoon, washing it again, and sanding it again. As I understand grain raising, it should get less ratty every time until it pretty much stays the same. If I'm off base on this, I'm sure someone will correct me. It sure wouldn't hurt to try, though. I do know that bamboo tends to stay nice and smooth even after several cookings and washings, but of course it's not available at most local lumberyards... Try some experiments, have fun with it, and let us know what works, What the heck, I'll give it a try. I also made a black locust spoon, but it is too pretty to put in the dishwasher! |
#10
Posted to rec.woodworking
|
|||
|
|||
What wood for spoon?
"Toller" wrote in message ... I have a large wooden cooking spoon. Nothing happens to it when you toss it in the dishwasher (other then getting clean...), but it is maybe 10 years old and starting to show its age. I made one out of walnut, but it gets pretty ratty after one washing. What wood is good for this purpose? The one I have looks like ash, but is probably some Asian wood. No wood is good in the dishwasher, even those vacuum-treated knife handles. If you insist on doing it, get a wood suitable for cutting board use with short grain and few extractives. Won't look as fuzzy or fade as fast. If you don't like straight-handled disposables, carve your own useful patterns out of something local and wash them by hand. They last for years. |
#11
Posted to rec.woodworking
|
|||
|
|||
What wood for spoon?
Toller wrote: What wood is good for this purpose? Trespa, Micarta or Corian. No wood enjoys repeated trips through a dishwasher. IMHE, lime (basswood), beech and maple all make fine spoons. If you regularly re-oil them, then they'll even survive dishwashing. Not that I'd recommend it though. Ash (and many other European hardwoods) are no use for food use as they're ring-porous. Olive doesn't survive well (certainly for deep spoons and ladles) as it tends to crack rather than just drying out. I get my small-diameter olivewood for turnery as scrap from a local olive seller, by scrounging the handles of their big ladles when they crack after too much washing. Tropicals are mainly terrible as spoons, particularly because many are porous (especially the Africans). Some of the oily ones are OK, such as teak or iroko, and these would probably resist dishwashing. Bamboo cetainly does, although this is hard to obtain as wide flat pressed sheet in the West (I buy cheap spatulas and cut them down). |
#12
Posted to rec.woodworking
|
|||
|
|||
What wood for spoon?
Toller wrote:
What wood is good for this purpose? For cooking or spanking? |
#13
Posted to rec.woodworking
|
|||
|
|||
What wood for spoon?
Doug Miller wrote: In article , "Toller" wrote: I have a large wooden cooking spoon. Nothing happens to it when you toss it in the dishwasher (other then getting clean...), but it is maybe 10 years old and starting to show its age. I made one out of walnut, but it gets pretty ratty after one washing. What wood is good for this purpose? The one I have looks like ash, but is probably some Asian wood. Beech is the standard. Yes. Beech is tough and resists checking which is important for something that going to be repeatedly wetted. Pearwood is good, probably many other orchard woods. You can probably make any wooden spoon last longer by using pure tung oil on it (and waiting for it to harden before suing it) and by NOT putting it in the dishwasher. Roy Underhill used to make a lot spoons and says he often used cottonwood. One of his guests showed a spoon made from poison ivy. I recommend against that choice. -- FF |
#14
Posted to rec.woodworking
|
|||
|
|||
What wood for spoon?
On Fri, 08 Dec 2006 00:35:40 GMT, "Toller" wrote:
I have a large wooden cooking spoon. Nothing happens to it when you toss it in the dishwasher (other then getting clean...), but it is maybe 10 years old and starting to show its age. I made one out of walnut, but it gets pretty ratty after one washing. What wood is good for this purpose? The one I have looks like ash, but is probably some Asian wood. Most any wood will get ratty when placed in the dishwasher. I wash them by hand. I've made a set of spoons out of apple wood. Most any fruitwood will do well. Also consider olive wood. Warm them at 200 degrees, then apply mineral oil. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Chainsawed through a spoon! | Home Repair | |||
souvenir spoon holder question | Woodworking | |||
Creating a wooden spoon. | Woodturning | |||
Unique Spoon Ring *please help!* | Metalworking |