This week's set has just been posted:

http://puzzlephotos.blogspot.com/


Rob

753. The lamps and cover suggest that something goes on the glass plate and
is lit by the lamps. Perhaps something goes on the glass plate under the
cover and then the lamps shine onto it, something where part of the item
has been coated somehow with light sensitive chemicals. I would say its for
making printed circuit boards but it looks too old for that. Something to
do with making plates for a printing press of some kind perhaps?

754. Looks like a clamp for some kind of scientific glassware perhaps (with
the base resting on the metal extensions and the neck or body being held by
the jaws of the clamp.

755. Some kind of mechanical, electric or power type chisel? Its hard to
tell but there might have been an electric cable that goes into the handle
at the bottom that powers it and then the trigger is pressed to make the
blade/bar move in and out.

I'm sure that 755 is an air chisel with an extra long bit.

I am totally lost on all other pictures this time. Nice job RH.

______________________________
Keep the whole world singing . . . .
DanG (remove the sevens)




"Jonathan Wilson" wrote in message
...
753. The lamps and cover suggest that something goes on the
glass plate and is lit by the lamps. Perhaps something goes on
the glass plate under the cover and then the lamps shine onto
it, something where part of the item has been coated somehow
with light sensitive chemicals. I would say its for making
printed circuit boards but it looks too old for that. Something
to do with making plates for a printing press of some kind
perhaps?

754. Looks like a clamp for some kind of scientific glassware
perhaps (with the base resting on the metal extensions and the
neck or body being held by the jaws of the clamp.

755. Some kind of mechanical, electric or power type chisel? Its
hard to tell but there might have been an electric cable that
goes into the handle at the bottom that powers it and then the
trigger is pressed to make the blade/bar move in and out.

753 is a photographic contact printing frame. When larger negs or
plates were used there was no need to enlarge, so the negs were
sandwiched with photographic paper (in "contact") and exposed to the
light from the bulbs in the base. It could also be called a proofer.

I'm so happy he's branching into photographic stuff... I have a hope of
getting a few right !

R.H. wrote:
This week's set has just been posted:

http://puzzlephotos.blogspot.com/

750. It looks like a screwdriver whose split handle can be folded down
to increase torque.
751. No idea - but that shouldn't prevent a wild assed guess, right?
Might be a sand rake for small Japanese Zen gardens.
752. Part of a clock dial with Roman numerals.
753. Light table for photography. It looks like some of the socket
bases are replacements.
754. Bottle cap crimper.
755. Pneumatic chisel.

R

R.H. wrote:
This week's set has just been posted:

http://puzzlephotos.blogspot.com/


Rob

753. Is a photographers homemade darkroom enlarger, the lifting cover plate
is where the negative glass plate is placed.
The bulbs act as the light source.

--
Sir Benjamin Middlethwaite

Jonathan Wilson wrote:
....

755. Some kind of mechanical, electric or power type chisel? Its hard to
tell but there might have been an electric cable that goes into the handle
at the bottom that powers it ...

No, it's a pneumatic connector. You're right in general, however, it's
a "pneumatic hand-held jackhammer" to paraphrase...

R.H. wrote:
This week's set has just been posted:
....

750. Hard to see the blade clearly in perspective but I'm saying it is
an early version of an angled screwdriver. Might have another specific
purpose but the blade isn't clearly enough shown to tell--perhaps
deliberate obfuscation???

751. Screed -- for what particular purpose, I don't know. Could be
for large tile, perhaps...

Somebody already got the print frame and pneumatic chisel/hammer...

I'm not so sure about the crimper guess---don't know I've ever seen an
old hand crimping tool so don't know, but if so, don't know what part
the stand plays--doesn't seem at all necessary, therefore Occam says...

"R.H." wrote in message
.. .
This week's set has just been posted:

http://puzzlephotos.blogspot.com/


Rob



752. Roman Numeral 4 on a clock.

754. Pop-up Sprinkler wrench

755. Chicago Pneumatic Air Chisel and with a chisel attachment. As common
as the impact wrench and air ratchet in the automotive business.

"dpb" wrote in message
ups.com...

Jonathan Wilson wrote:
...

755. Some kind of mechanical, electric or power type chisel? Its hard to
tell but there might have been an electric cable that goes into the
handle
at the bottom that powers it ...

No, it's a pneumatic connector. You're right in general, however, it's
a "pneumatic hand-held jackhammer" to paraphrase...


Jack hammer? Absolutely known as an Air Chisel in the automotive business
and is commonly used to cut steel exhaust pipes using a split chisel.

"R.H." wrote in message
.. .
This week's set has just been posted:

http://puzzlephotos.blogspot.com/


Rob

My guesses:

750. Diving screwdriver
751. Brick laying/mortaring tool
752. IIII (on a clock or watch?)
753. Frame for creating blueprint copies.
754. Bottle cap crimper/remover
755. Air chisel

Carl G.

Carl G. wrote:
"R.H." wrote in message
.. .
This week's set has just been posted:

http://puzzlephotos.blogspot.com/


Rob

My guesses:

750. Diving screwdriver

Would a wood handle be good for a tool repeatedly exposed to water under
pressure? Bronze will corrode in salt water.

I think was designed long ago for working around magnets, and the pivot
is to use it in tight places. I wonder if it was for working on
generators with permanent magnets.

"Bart Byers" wrote in message
.. .
Carl G. wrote:
"R.H." wrote in message
.. .
This week's set has just been posted:

http://puzzlephotos.blogspot.com/


Rob

My guesses:

750. Diving screwdriver

Would a wood handle be good for a tool repeatedly exposed to water under
pressure? Bronze will corrode in salt water.

I think was designed long ago for working around magnets, and the pivot is
to use it in tight places. I wonder if it was for working on generators
with permanent magnets.

I agree about the wood handle scales. I'm not entirely convinced about it
being bronze. I dropped the image in PS and adjusted for the white paper. It
could be bronze, or it could be patina. However, nobody has commented yet on
the flip-open handle, which would give a 12" t-bar... plenty of torque.

In article ,
R.H. wrote:
This week's set has just been posted:

http://puzzlephotos.blogspot.com/

750: I'm not going to say elevator key.

751: For working the surface of recently-poured concrete.

752: A roman numeral IIII on a clock

753: Ye Olde Xerox Machine

754: Another specialty wrench, have no idea what it's for

755: Air hammer
--
There's no such thing as a free lunch, but certain accounting practices can
result in a fully-depreciated one.

Leon wrote:
"dpb" wrote in message
....

a "pneumatic hand-held jackhammer" to paraphrase...


Jack hammer? Absolutely known as an Air Chisel ...

Quotation marks and specifically saying "to paraphrase" aren't enough
for ya'???

750 - Looks kind of like a split handle Dzus fastener tool.

751 - Scraper tool?

752 - Numeral 3?

753 - Glass plate contact print table?

754 - Cap crimp tool

755 - Chicago Pneumatic 715K Heavy Duty air hammer (made in Utica NY)
with long chisel bit.

--
Steve W.
Near Cooperstown, New York

----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

753 is definitely a contact printer. It looks like it may have been cobbled
up out of existing components. The top cover/door has a hinge, which allows
the user to close it part way and observe the alignment of the paper with
the negative. The stand looks very well made, but not quite right for its
use. Maybe converted from a typewriter desk. The inside should be painted
white. The bulbs should all be the same.
754 looks like a tool for loosening the screw tops on bottles, but why the
bent rod hook-hanger looking things? My suggestion is it is for gently
holding the neck on a bottle of cheap wine, so the tipsy drinker has less
chance of dropping it. ;-)

"dpb" wrote in message
ps.com...

Leon wrote:
"dpb" wrote in message
...

a "pneumatic hand-held jackhammer" to paraphrase...


Jack hammer? Absolutely known as an Air Chisel ...

Quotation marks and specifically saying "to paraphrase" aren't enough
for ya'???


I have been around air chisels since the early 70's and have never heard of
them referred to as jack hammers. Correctly named they are hammers or air
hammers. Jack hammers are typically held by 2 hands and are much larger.
Perhaps it's a regional thing.

R.H. wrote:
This week's set has just been posted:

http://puzzlephotos.blogspot.com/


Rob


753 looks like a light table and more specifically
one for making contact prints. Can't tell the size
but looks like for 8" x 10" negatives.

"R.H." wrote in message
.. .
This week's set has just been posted:

http://puzzlephotos.blogspot.com/


752 is the Roman numeral 4 on a grandfather clock.

753 is obviously an antique photocopier.... ;-)

ally

Leon wrote:
"dpb" wrote in message
ps.com...

Leon wrote:
"dpb" wrote in message
...

a "pneumatic hand-held jackhammer" to paraphrase...


Jack hammer? Absolutely known as an Air Chisel ...

Quotation marks and specifically saying "to paraphrase" aren't enough
for ya'???


I have been around air chisels since the early 70's and have never heard of
them referred to as jack hammers. Correctly named they are hammers or air
hammers. Jack hammers are typically held by 2 hands and are much larger.
Perhaps it's a regional thing.

I have been around air chisels for at least as long and if you WOULD
READ and understand what you read you would clearly see that I didn't
call it a jackhammer, I used the term to give the other poster an idea
what it does...

paraphrase ( ) n. A restatement in another form or other words...

Now, are you satisfied yet???

"dpb" wrote in message
oups.com...

I have been around air chisels for at least as long and if you WOULD
READ and understand what you read you would clearly see that I didn't
call it a jackhammer, I used the term to give the other poster an idea
what it does...

paraphrase ( ) n. A restatement in another form or other words...

Now, are you satisfied yet???



To paraphrase, is to redescribe a text or passage in another form or other
words.

You did not do that. You mentioned a much larger tool/piece of equipment,
the jackhammer.


Ok, In my neck of the woods if you mention a Jackhammer a vision of a much
larger tool that is often used to break up concrete comes to mind.

If I said, hand me that hand held pile driver, would you think hammer?

Leon wrote:
"dpb" wrote in message
oups.com...

I have been around air chisels for at least as long and if you WOULD
READ and understand what you read you would clearly see that I didn't
call it a jackhammer, I used the term to give the other poster an idea
what it does...

paraphrase ( ) n. A restatement in another form or other words...

Now, are you satisfied yet???



To paraphrase, is to redescribe a text or passage in another form or other
words.

You did not do that. You mentioned a much larger tool/piece of equipment,
the jackhammer.

....

I _DID_ do that (and said I was doing it, too!) Now, you can quibble
over whether it was a good paraphrase, but there should have been no
confusion whatsoever that I called the tool in question itself a
jackhammer but you were simply looking for an excuse to slam somebody.

"dpb" wrote:


Leon wrote:
"dpb" wrote in message
oups.com...

I have been around air chisels for at least as long and if you WOULD
READ and understand what you read you would clearly see that I didn't
call it a jackhammer, I used the term to give the other poster an idea
what it does...

paraphrase ( ) n. A restatement in another form or other words...

Now, are you satisfied yet???



To paraphrase, is to redescribe a text or passage in another form or other
words.

You did not do that. You mentioned a much larger tool/piece of equipment,
the jackhammer.

...

I _DID_ do that (and said I was doing it, too!) Now, you can quibble
over whether it was a good paraphrase, but there should have been no
confusion whatsoever that I called the tool in question itself a
jackhammer but you were simply looking for an excuse to slam somebody.

1. Both Pneumatic
2. Both operate on the repeated explosive release of supplied compressed air.
3. Both have 'cutting blade-type' tip
4. Both held by a human and used to cut into things

Seems like an excellent paraphrase to use to explain an air chisel to someone
who knows what a jackhammer is.

If you can't see that Leon, you don't understand one or other tool, or the
English language.

"The3rd Earl Of Derby" wrote:

R.H. wrote:
This week's set has just been posted:

http://puzzlephotos.blogspot.com/


Rob

753. Is a photographers homemade darkroom enlarger, the lifting cover plate
is where the negative glass plate is placed.
The bulbs act as the light source.

Which part does the magnification?

Patrick Hamlyn wrote:
"The3rd Earl Of Derby" wrote:

R.H. wrote:
This week's set has just been posted:

http://puzzlephotos.blogspot.com/


Rob

753. Is a photographers homemade darkroom enlarger, the lifting
cover plate is where the negative glass plate is placed.
The bulbs act as the light source.

Which part does the magnification?

Plates didn't need magnification the camera done that. ;-)

The negative plate was placed in the square housing and then the light
switched on for a few seconds and then immersed in the developer.

--
Sir Benjamin Middlethwaite

On Thu, 24 Aug 2006 14:36:59 -0700, dpb wrote:
Leon wrote:
"dpb" wrote in message
Leon wrote:
"dpb" wrote in message

a "pneumatic hand-held jackhammer" to paraphrase...

Jack hammer? Absolutely known as an Air Chisel ...

Quotation marks and specifically saying "to paraphrase" aren't enough
for ya'???

I have been around air chisels since the early 70's and have never heard of
them referred to as jack hammers. Correctly named they are hammers or air
hammers. Jack hammers are typically held by 2 hands and are much larger.
Perhaps it's a regional thing.

I have been around air chisels for at least as long and if you WOULD
READ and understand what you read you would clearly see that I didn't
call it a jackhammer, I used the term to give the other poster an idea
what it does...

paraphrase ( ) n. A restatement in another form or other words...

Now, are you satisfied yet???

How about, "Jill Hammer"? ;-)

Cheers!
Rich

Because "R.H." could, he/she/it opin'd:

This week's set has just been posted:

http://puzzlephotos.blogspot.com/

OK, I'll give it a shot this time:

750: a screwdriver with a variable-angle handle.

751: ??

752: The Roman numeral 4 from a antique clock (I have one just like it
on the fireplace mantel). I don't know why they sometimes used IIII
and sometimes used IV, but they did,

753: Looks like an ironing table for shirts, but what are the light
bulbs for??

754: Specialized pliers, but haven't a clue for what.

755: An air chisel; I have one quit a bit like it in my Man Garage

This is fun! THANX!!

-Don
--
"What do *you* care what other people think?" --Arline Feynman

R.H. wrote:
This week's set has just been posted:

http://puzzlephotos.blogspot.com/


Rob

751. An early form of router bit for making * V * grooves. lol

--
Sir Benjamin Middlethwaite

The3rd Earl Of Derby wrote:
Patrick Hamlyn wrote:
"The3rd Earl Of Derby" wrote:

R.H. wrote:
This week's set has just been posted:

http://puzzlephotos.blogspot.com/


Rob
753. Is a photographers homemade darkroom enlarger, the lifting
cover plate is where the negative glass plate is placed.
The bulbs act as the light source.
Which part does the magnification?

Plates didn't need magnification the camera done that. ;-)

The negative plate was placed in the square housing and then the light
switched on for a few seconds and then immersed in the developer.


You are digging a deeper hole. Most cameras don't
magnify they make an image smaller than the real
object.

There is not lens in the object described,
therefore it can't be an enlarger.

Actually the paper is immersed in developer not
the light. (which is what your sentence said).
It would be easier if you just gave up! or better,
admit that you were wrong. May insight be your gift.

According to R.H. :
This week's set has just been posted:

http://puzzlephotos.blogspot.com/

O.K. Posting from rec.crafts.metalworking as usual.

750) A screwdriver on which you can swing the handle to the
side, thus allowing a lot more torque.

751) For spreading mortar or cement.

752) The curvature of the tops and bottoms of the Roman numeral
suggest that it is part of a dial like on a clockface. And
(unless the image has been rotated) the presence of a '4' at the
bottom suggests perhaps a counter from zero to seven for the
days of the week -- so a secondary dial on a complex clock.

753) For contact printing large negatives. The tiny red bulb
allows you to align things without exposing the paper.

The spring fingers are designed to spread the clamp-down force
over the whole of the negative and paper.

754) The gripper is about right for a bottle cap similar to that
found on a ketchup bottle, however the support fingers below
don't look right for that. Perhaps for unscrewing a sampling
bottle from under something?

755) Compressed-air driven chisel.

Now to see what others have said, and then crash.

Enjoy,
DoN.
--
Email: | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---

"George E. Cawthon" wrote in message
...
The3rd Earl Of Derby wrote:
Patrick Hamlyn wrote:
"The3rd Earl Of Derby" wrote:

R.H. wrote:
This week's set has just been posted:

http://puzzlephotos.blogspot.com/


Rob
753. Is a photographers homemade darkroom enlarger, the lifting
cover plate is where the negative glass plate is placed.
The bulbs act as the light source.
Which part does the magnification?

Plates didn't need magnification the camera done that. ;-)

The negative plate was placed in the square housing and then the light
switched on for a few seconds and then immersed in the developer.


You are digging a deeper hole. Most cameras don't magnify they make an
image smaller than the real object.

There is not lens in the object described, therefore it can't be an
enlarger.

Actually the paper is immersed in developer not the light. (which is what
your sentence said).
It would be easier if you just gave up! or better, admit that you were
wrong. May insight be your gift.

Your first point seemed on the mark. There's no point in being
intentionally obtuse pointing out a misplaced modifier. I'm relatively
certain most people understood the meaning.

todd

In article , R.H.
wrote:

http://puzzlephotos.blogspot.com/

755 is for chipping welding beads.

On Fri, 25 Aug 2006 01:17:22 GMT, "The3rd Earl Of Derby"
wrote:

,;Patrick Hamlyn wrote:
,; "The3rd Earl Of Derby" wrote:
,;
,; R.H. wrote:
,; This week's set has just been posted:
,;
,; http://puzzlephotos.blogspot.com/
,;
,;
,; Rob
,;
,; 753. Is a photographers homemade darkroom enlarger, the lifting
,; cover plate is where the negative glass plate is placed.
,; The bulbs act as the light source.
,;
,; Which part does the magnification?
,;
,;Plates didn't need magnification the camera done that. ;-)
,;
,;The negative plate was placed in the square housing and then the light
,;switched on for a few seconds and then immersed in the developer.

Wrong. The negative plate is placed on the glass, then photo-paper is
placed on the negative. The light is turned on for the appropriate
length of time and the photo-paper (not the negative) is emersed in
the developer.

;-)

"dpb" wrote in message
oups.com...

I _DID_ do that (and said I was doing it, too!) Now, you can quibble
over whether it was a good paraphrase, but there should have been no
confusion whatsoever that I called the tool in question itself a
jackhammer but you were simply looking for an excuse to slam somebody.


Never mind.

"Patrick Hamlyn" wrote in message
...
were simply looking for an excuse to slam somebody.

1. Both Pneumatic
2. Both operate on the repeated explosive release of supplied compressed
air.
3. Both have 'cutting blade-type' tip
4. Both held by a human and used to cut into things


The same comparison could be made between an 18 wheeler and a go cart.

I suppose if you stretch your imagination and don't want or need an accurate
comparison a jack hammer is similar to an air chisel, except that an air
chisel can usually be pointed in any direction to accurately cut sheet
metal, pipe, peen objects, cut small nuts and bolts and so on. I only see a
jack hammer as a demolition tool.

Most of them have been answered correctly this week:






750. Triple lever screwdriver, the handles fold down for better torque.

751. Not sure what this tool is for, see the answer page for a list a
guesses.

752. Number 4 on a clock

753. Kodak Crown printer

754. Champaign bottle opener

755. Pneumatic zip gun


Some new photos and a couple of links have been posted on the answer page:

http://pzphotosan131tm.blogspot.com/


Rob

Leon wrote:

"R.H." wrote in message
.. .
This week's set has just been posted:

http://puzzlephotos.blogspot.com/


Rob



752. Roman Numeral 4 on a clock.

That would be IV, not IIII


754. Pop-up Sprinkler wrench

755. Chicago Pneumatic Air Chisel and with a chisel attachment. As common
as the impact wrench and air ratchet in the automotive business.


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida

todd wrote:
"George E. Cawthon" wrote in message
...
The3rd Earl Of Derby wrote:
Patrick Hamlyn wrote:
"The3rd Earl Of Derby" wrote:

R.H. wrote:
This week's set has just been posted:

http://puzzlephotos.blogspot.com/


Rob
753. Is a photographers homemade darkroom enlarger, the lifting
cover plate is where the negative glass plate is placed.
The bulbs act as the light source.
Which part does the magnification?
Plates didn't need magnification the camera done that. ;-)

The negative plate was placed in the square housing and then the light
switched on for a few seconds and then immersed in the developer.

You are digging a deeper hole. Most cameras don't magnify they make an
image smaller than the real object.

There is not lens in the object described, therefore it can't be an
enlarger.

Actually the paper is immersed in developer not the light. (which is what
your sentence said).
It would be easier if you just gave up! or better, admit that you were
wrong. May insight be your gift.

Your first point seemed on the mark. There's no point in being
intentionally obtuse pointing out a misplaced modifier. I'm relatively
certain most people understood the meaning.

todd


If you missed the point, then you missed the point.

Leon wrote:
"Patrick Hamlyn" wrote in message
...
were simply looking for an excuse to slam somebody.
1. Both Pneumatic
2. Both operate on the repeated explosive release of supplied compressed
air.
3. Both have 'cutting blade-type' tip
4. Both held by a human and used to cut into things


The same comparison could be made between an 18 wheeler and a go cart.

I suppose if you stretch your imagination and don't want or need an accurate
comparison a jack hammer is similar to an air chisel, except that an air
chisel can usually be pointed in any direction to accurately cut sheet
metal, pipe, peen objects, cut small nuts and bolts and so on. I only see a
jack hammer as a demolition tool.




Leon, you are absolutely right. Some people, for
whatever reason, just never get the point of being
specific. There is a much relations ship of knife
to a sword as there is a chisel to a jack hammer.
Just heard on the TV, one news stations said they
found a blasting cap in the luggage, another said
they found a stick of dynamite. Exactly what I
would expect from reporters who usually have
little science or technical knowledge in any
field. I think you could (should) expect a
little higher standard of comments in a technical
newsgroup.