Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Question re 3M safest Stripper
I'm using Safest stripper on a furniture project (see
http://www.briansiano.com for details), and I have a question. It's somewhat difficult to ensure that a nice, even coat of stripper goes on. Since Safest Stripper is water-based, would it be worth it to dilute the stuff so i could use a pump to spray it on evenly? I know this would probably make it less effective, or make it work slowly, but I can work with that: I'd just leave the stripper on for longer, with plastic wrap on top to keep it moist. But has anyone tried this? |
#2
Posted to rec.woodworking
|
|||
|
|||
Question re 3M safest Stripper
On Sun, 09 Jul 2006 05:37:30 GMT, Brian Siano
wrote: I'm using Safest stripper on a furniture project (see http://www.briansiano.com for details), and I have a question. It's somewhat difficult to ensure that a nice, even coat of stripper goes on. Since Safest Stripper is water-based, would it be worth it to dilute the stuff so i could use a pump to spray it on evenly? I know it seems really thick, but you should be able to spray the stuff as is. I'd try that before diluting it, myself. I know this would probably make it less effective, or make it work slowly, but I can work with that: I'd just leave the stripper on for longer, with plastic wrap on top to keep it moist. But has anyone tried this? Yep- not with "Safest Stripper", but I've used similar stuff in old windex spray bottles, and it worked fine. |
#3
Posted to rec.woodworking
|
|||
|
|||
Question re 3M safest Stripper
In article uC0sg.4483$Ep.2488@trnddc08,
Brian Siano wrote: I'm using Safest stripper on a furniture project (see http://www.briansiano.com for details), and I have a question. It's somewhat difficult to ensure that a nice, even coat of stripper goes on. Since Safest Stripper is water-based, would it be worth it to dilute the stuff so i could use a pump to spray it on evenly? I know this would probably make it less effective, or make it work slowly, but I can work with that: I'd just leave the stripper on for longer, with plastic wrap on top to keep it moist. But has anyone tried this? It's a coat of stripper, not a coat of varnish. It doesn't have to be a "nice , even coat." -- Larry Wasserman Baltimore, Maryland |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Good morning or good evening depending upon your location. I want to ask you the most important question of your life. Your joy or sorrow for all eternity depends upon your answer. The question is: Are you saved? It is not a question of how good | Woodworking | |||
To anyone sick of alt.hvac | Home Repair | |||
OT Guns more Guns | Metalworking | |||
Plumbing Question | UK diy | |||
Question????? | Woodworking |