Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Building a small workbench - Advice needed
Hi everyone,
I am planning to build a small workbench for my shop. The shop is only 8' x10', so space is at a minimum. I usually just build small boxes for magician's props - usually under 2'x2', so I don't need much space. I'm thinking a 2'x4' bench top would work well, but I am concerned the bench will be too light to work well. I like to dimension my own wood with hand planes, so I would like the bench to be pretty stable. It doesn't need a lot of accessories - just one vise on the front and a sliding stop on both ends. Can anyone forsee any issues I may run into with a small workbench or does anyone have any advice concerning the weight issue? Thanks, Richard http://www.smallmiraclesentertainment.com |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Exemption from building regs??? | UK diy | |||
Marantz 2330B Amp Schematic/Troubleshooting Advice Needed | Electronics Repair | |||
Advice for laying a small patio for arbour - 3m x 1m | UK diy | |||
Newbie tool advice needed | Woodworking | |||
Cherry edging around curved oak table - advice needed | Woodworking |