Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Can you identify what this box contains?
Someone on b3ta found a wooden box. In it were lots of little bits of
paper of various sizes, mostly circular. What the hell is it? Pics here http://www.identity.ie/whatsinthebox/ |
#2
|
|||
|
|||
"pontarfynach" wrote in message ... Someone on b3ta found a wooden box. In it were lots of little bits of paper of various sizes, mostly circular. What the hell is it? Pics here http://www.identity.ie/whatsinthebox/ put under buttons when sewing them on, discarded by tearing afterwards. (possibly, but in very dark recesses of mind) mrcheerful |
#3
|
|||
|
|||
pontarfynach wrote:
Someone on b3ta found a wooden box. In it were lots of little bits of paper of various sizes, mostly circular. What the hell is it? Pics here http://www.identity.ie/whatsinthebox/ the text on the papers tells me someone made those discs themselves with some tool. But why collect them, why make them? For what? NT |
#4
|
|||
|
|||
In article , "pontarfynach" a4120
@pontarfynach.somewhere says... Someone on b3ta found a wooden box. In it were lots of little bits of paper of various sizes, mostly circular. What the hell is it? Pics here http://www.identity.ie/whatsinthebox/ Shims for re-padding flutes, saxophones etc? |
#5
|
|||
|
|||
pontarfynach wrote:
Someone on b3ta found a wooden box. In it were lots of little bits of paper of various sizes, mostly circular. What the hell is it? Pics here http://www.identity.ie/whatsinthebox/ Are they paper or card? If stiff enough they could be used in pairs for making woolly bobbles. You put two identical shapes back to back, wrap the wool through the central hole and around them until you have enough on, then insert your scissors between the two sheets cutting the wool , which you secure round the middle, then fluff it up to a ball shape. Chris -- Chris J Dixon Nottingham UK Have dancing shoes, will ceilidh. |
#6
|
|||
|
|||
Chris J Dixon wrote:
Are they paper or card? If stiff enough they could be used in pairs for making woolly bobbles. You put two identical shapes back to back, wrap the wool through the central hole and around them until you have enough on, then insert your scissors between the two sheets cutting the wool , which you secure round the middle, then fluff it up to a ball shape. ....so, you clearly spend a lot of time making fluffy bobbles, Chris?! David |
#7
|
|||
|
|||
On Thu, 24 Mar 2005 17:21:23 +0000, pontarfynach
wrote: Someone on b3ta found a wooden box. In it were lots of little bits of paper of various sizes, mostly circular. What the hell is it? Pics here http://www.identity.ie/whatsinthebox/ Anything to do with grinding wheels? Looks a bit clean for engineers. |
#8
|
|||
|
|||
"Bill H" wrote in message ... On Thu, 24 Mar 2005 17:21:23 +0000, pontarfynach wrote: Someone on b3ta found a wooden box. In it were lots of little bits of paper of various sizes, mostly circular. What the hell is it? Pics here http://www.identity.ie/whatsinthebox/ Anything to do with grinding wheels? Looks a bit clean for engineers. They look like roughly made circular pieces of card/paper with crudely formed holes made in them. The mystery is of course why? I'll put my dearstalker on and puff on my large angular pipe for a while on that one. |
#10
|
|||
|
|||
pontarfynach wrote:
Someone on b3ta found a wooden box. In it were lots of little bits of paper of various sizes, mostly circular. What the hell is it? Pics here http://www.identity.ie/whatsinthebox/ How about: Backing pads to go on a small rotary polishing/sanding wheel. The hole is where the screw plus disc that holds them on the pad goes through into the end of the mandril. -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
#11
|
|||
|
|||
Peter Parry wrote in
: As has been suggested - spacers for use by a tailor sewing buttons on to trousers and suits. Placing one of these between button and fabric gives you a degree of stand-off which makes the button easier to fasten. Any idea where they come from? I'm afraid I don't quite believe this - I've always used a matchstick, and it's so much more convenient in use than thes would be I'd think tailors would have a precision reusable matchstick. Of course I'm open to be proved wrong- I'd certainly like to know the answer mike |
#12
|
|||
|
|||
Peter Parry wrote:
On 24 Mar 2005 10:19:31 -0800, wrote: the text on the papers tells me someone made those discs themselves with some tool. But why collect them, why make them? For what? As has been suggested - spacers for use by a tailor sewing buttons on to trousers and suits. Placing one of these between button and fabric gives you a degree of stand-off which makes the button easier to fasten. Seems the most plausible answer so far I agree; but if so why are they round? It would be much easier to cut square ones, which would do just the same job (Ok, unless the buttons were really clseo together!) David |
#13
|
|||
|
|||
Lobster wrote:
Peter Parry wrote: On 24 Mar 2005 10:19:31 -0800, wrote: the text on the papers tells me someone made those discs themselves with some tool. But why collect them, why make them? For what? As has been suggested - spacers for use by a tailor sewing buttons on to trousers and suits. Placing one of these between button and fabric gives you a degree of stand-off which makes the button easier to fasten. Seems the most plausible answer so far I agree; but if so why are they round? It would be much easier to cut square ones, which would do just the same job (Ok, unless the buttons were really clseo together!) I'm not really convinced either. A hole doesnt stop the cloth lifting up so its against the button, it wouldnt work I dont think. As said, a needle or other matchlike device would work, but I dont think thick card discs would. Also I got the impression these were only paper, which would make them useless as spacers. NT |
#14
|
|||
|
|||
Bill H wrote:
On Thu, 24 Mar 2005 17:21:23 +0000, pontarfynach wrote: Someone on b3ta found a wooden box. In it were lots of little bits of paper of various sizes, mostly circular. What the hell is it? Pics here http://www.identity.ie/whatsinthebox/ Anything to do with grinding wheels? Looks a bit clean for engineers. I wondered that, if you put nut washers and bolt on a stack of them you get a paper wheel, which can be used for grinding and polishing. But those wheels would be tiny, so would have to do high rpm to get anywhere, and anything assembled that basically and run that fast would vibrate like crazy. I know cos I've made wheels that run at 20,000 rpm, and they do. The other problem with that idea is IIRC there were several different but near sizes: why would one want several wheels of close but not identical sizes? And the final q is, why did they cut the paper but not assemble the wheels? And why are there no bolts nuts washers or collets in the box? I bet theres some craft that uses these, we just dont know what. From the fancy quality box it does look more craft than business to me. NT |
#15
|
|||
|
|||
In message , mike ring
writes Peter Parry wrote in : As has been suggested - spacers for use by a tailor sewing buttons on to trousers and suits. Placing one of these between button and fabric gives you a degree of stand-off which makes the button easier to fasten. Any idea where they come from? I'm afraid I don't quite believe this - I've always used a matchstick, and it's so much more convenient in use than thes would be I'd think tailors would have a precision reusable matchstick. I, on both occasions I've stitched a button on, wrapped a couple of turns of thread round the the thread between the fabric and button - as my mother showed me. -- geoff |
#16
|
|||
|
|||
On Thu, 24 Mar 2005 17:21:23 +0000, pontarfynach
wrote: Someone on b3ta found a wooden box. In it were lots of little bits of paper of various sizes, mostly circular. What the hell is it? Pics here http://www.identity.ie/whatsinthebox/ Not quite sure of the size/s, or the likely vintage. Could they be for button making? I have seen some very old buttons made by using a needle to wind thread from edge to middle of tiny circles of paper or card. - Regards, VivienB |
#17
|
|||
|
|||
In message .com,
writes Lobster wrote: Peter Parry wrote: On 24 Mar 2005 10:19:31 -0800, wrote: the text on the papers tells me someone made those discs themselves with some tool. But why collect them, why make them? For what? As has been suggested - spacers for use by a tailor sewing buttons on to trousers and suits. Placing one of these between button and fabric gives you a degree of stand-off which makes the button easier to fasten. Seems the most plausible answer so far I agree; but if so why are they round? It would be much easier to cut square ones, which would do just the same job (Ok, unless the buttons were really clseo together!) I'm not really convinced either. A hole doesnt stop the cloth lifting up so its against the button, it wouldnt work I dont think. As said, a needle or other matchlike device would work, but I dont think thick card discs would. Also I got the impression these were only paper, which would make them useless as spacers. I've seen similar spacers for getting the action right on pianos - usually placed under the felts -- geoff |
#18
|
|||
|
|||
In message , raden
writes I've seen similar spacers for getting the action right on pianos - usually placed under the felts I'd certainly go with a shim of some sort. While of similar diameters, they are different thickness'. Top left, e.g., looks very thin tracing paper, 2nd bottom right are pretty think, going on a mm. -- steve |
#19
|
|||
|
|||
On Thu, 24 Mar 2005 17:21:23 +0000, pontarfynach
wrote: Someone on b3ta found a wooden box. In it were lots of little bits of paper of various sizes, mostly circular. What the hell is it? Pics here http://www.identity.ie/whatsinthebox/ round tuits? David |
#20
|
|||
|
|||
Rob Morley wrote:
In article , "pontarfynach" a4120 @pontarfynach.somewhere says... Someone on b3ta found a wooden box. In it were lots of little bits of paper of various sizes, mostly circular. What the hell is it? Pics here http://www.identity.ie/whatsinthebox/ Shims for re-padding flutes, saxophones etc? I think 'musical instruments' too. |
#21
|
|||
|
|||
raden wrote:
In message .com, writes Lobster wrote: Peter Parry wrote: On 24 Mar 2005 10:19:31 -0800, wrote: the text on the papers tells me someone made those discs themselves with some tool. But why collect them, why make them? For what? As has been suggested - spacers for use by a tailor sewing buttons on to trousers and suits. Placing one of these between button and fabric gives you a degree of stand-off which makes the button easier to fasten. Seems the most plausible answer so far I agree; but if so why are they round? It would be much easier to cut square ones, which would do just the same job (Ok, unless the buttons were really clseo together!) I'm not really convinced either. A hole doesnt stop the cloth lifting up so its against the button, it wouldnt work I dont think. As said, a needle or other matchlike device would work, but I dont think thick card discs would. Also I got the impression these were only paper, which would make them useless as spacers. I've seen similar spacers for getting the action right on pianos - usually placed under the felts Check the writing on the paper. Its a specialist musical publication 'bass viol' Not a normal thing to find your chips wrapped in. Shims an musical. So far piaons and wind instruments. I'd say disposable as well - somethimg to set an action up, which are then discarded. As in something to set backlash on a threaded shaft perhaps, that you rip off when you have tightened down? |
#22
|
|||
|
|||
In message , David Shepherd
writes On Thu, 24 Mar 2005 17:21:23 +0000, pontarfynach wrote: Someone on b3ta found a wooden box. In it were lots of little bits of paper of various sizes, mostly circular. What the hell is it? Pics here http://www.identity.ie/whatsinthebox/ round tuits? Just don't tell SWMBO, or she'll be off to get a couple of boxes -- bof at bof dot me dot uk |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Identify logo - hysteresis shape? | Electronics Repair | |||
How to identify electric motor | UK diy | |||
Identify this type of non-return valve? | UK diy | |||
Looking to identify a wood | Woodworking | |||
Please identify this memory | Electronics Repair |