Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Capicitor wiring for a Grundfos CH Pump
My central heating pump isn't working. It goes round but you have to
flick the rotor with a screwdriver each time to get it to start. Following advice from other posts on this group I thought it might be the capacitor but the problem is the pump is hard to get at and when I levered the capacitor out, it came out wires and all before I could see where the wires came from. The pump is a Grundfos UPS15-50x18. There seem to be eight holes numbered 1 to 8 which you can push a wire into. Nos. 1 and 2 are already joined by a wire link so I'm guessing it's not those but which of the other six do I use? All advice gratefully received. Also. Does any one know where to get a replacement capacitor from? I live in the Reading area. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Water Pump / Pressure Tank Problem !!!!!! | Home Repair | |||
Water Pump / Pressure Tank Problem !!!!!! | Home Ownership | |||
Low Water Pressure - pump stops at 20 psi - need advice Please | Home Repair | |||
Grundfos Water Pump | Home Repair | |||
Backup Sump Pump Horror Story | Home Repair |