UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #121   Report Post  
raden
 
Posts: n/a
Default

In message , IMM writes

"Andy Hall" wrote in message
.. .
On Sat, 6 Nov 2004 00:46:18 -0000, "IMM" wrote:




They shouldn't have put it to the vote. Only 48% turned out and few
actually know the issues and what gains they get.


Heaven forbid that democracy should interrupt government policy.


Democracy only works when the electors know the issues, otherwise it is
farce.

No democracy only works when there's a real difference between the
options

--
geoff
  #122   Report Post  
raden
 
Posts: n/a
Default

In message , Andy Hall
writes

Which clearly says you don't need a specialist plastic pipe cutter.
Did
you understand that? Are you that retarded?

When you're in a hole, STOP DIGGING.
You're in danger of falling out the other side of the earth...


Not in a hole. Not digging. Hepworth said you don't need a specialist
cutter. That was clear.


snip tripe



I think that when you did your original snipping, that you snipped the
important bit which was *not* to use a hacksaw, but left the tripe
behind.

I wouldn't apply for a job as newspaper editor if I were you......

Fat chance of that he'd have to learn to spell and get his grammar
correct, unless he snipped all the words from every article

--
geoff
  #123   Report Post  
raden
 
Posts: n/a
Default

In message , IMM writes

When you're in a hole, STOP DIGGING.
You're in danger of falling out the other side of the earth...

Not in a hole. Not digging. Hepworth said you don't need a
specialist
cutter. That was clear.

snip tripe

I think that when

snip tripe

Hepworth said you don't need a specialist cutter. That was clear.


What they actually said was:


The inventive can find many ways of achieving a perfectly acceptable
clean, square cut using a variety of tools."


The above clearly says that a specialist pipe cutter tool need not be used.
Can you understand that? Nah don't reply, you can't.

So just tell us what it says about using a hacksaw ...

--
geoff

  #124   Report Post  
IMM
 
Posts: n/a
Default


"raden" wrote in message
...
In message , IMM writes

When you're in a hole, STOP DIGGING.
You're in danger of falling out the other side of the earth...

Not in a hole. Not digging. Hepworth said you don't need a
specialist
cutter. That was clear.

snip tripe

I think that when

snip tripe

Hepworth said you don't need a specialist cutter. That was clear.

What they actually said was:


The inventive can find many ways of achieving a perfectly acceptable
clean, square cut using a variety of tools."


The above clearly says that a specialist pipe cutter tool need not be

used.
Can you understand that? Nah don't reply, you can't.

So just tell us what it says about using a hacksaw ...


Maxie, it says a secialist tool need not be used.


  #125   Report Post  
IMM
 
Posts: n/a
Default


"raden" wrote in message
...
In message , Andy Hall
writes

Which clearly says you don't need a specialist plastic pipe

cutter.
Did
you understand that? Are you that retarded?

When you're in a hole, STOP DIGGING.
You're in danger of falling out the other side of the earth...


Not in a hole. Not digging. Hepworth said you don't need a

specialist
cutter. That was clear.

snip tripe



I think that when you did your original snipping, that you snipped the
important bit which was *not* to use a hacksaw, but left the tripe
behind.

I wouldn't apply for a job as newspaper editor if I were you......

Fat chance of that he'd have to learn to spell and get his grammar
correct, unless he snipped all the words from every article


Maxie, how is Dim Lin?




  #126   Report Post  
Andy Hall
 
Posts: n/a
Default

On Mon, 8 Nov 2004 00:07:04 -0000, "IMM" wrote:


"raden" wrote in message
...
In message , IMM writes

When you're in a hole, STOP DIGGING.
You're in danger of falling out the other side of the earth...

Not in a hole. Not digging. Hepworth said you don't need a
specialist
cutter. That was clear.

snip tripe

I think that when

snip tripe

Hepworth said you don't need a specialist cutter. That was clear.

What they actually said was:

The inventive can find many ways of achieving a perfectly acceptable
clean, square cut using a variety of tools."

The above clearly says that a specialist pipe cutter tool need not be

used.
Can you understand that? Nah don't reply, you can't.

So just tell us what it says about using a hacksaw ...


Maxie, it says a secialist tool need not be used.

Did you mean *socialist* tool?

I think that you've come close to reality if so.....



--

..andy

To email, substitute .nospam with .gl
  #127   Report Post  
raden
 
Posts: n/a
Default

In message , IMM writes
The above clearly says that a specialist pipe cutter tool need not be

used.
Can you understand that? Nah don't reply, you can't.

So just tell us what it says about using a hacksaw ...


Maxie, it says a secialist tool need not be used.

What does it SPECIFICALLY say about hacksaws ?

--
geoff
  #128   Report Post  
raden
 
Posts: n/a
Default

In message , IMM writes


I think that when you did your original snipping, that you snipped the
important bit which was *not* to use a hacksaw, but left the tripe
behind.

I wouldn't apply for a job as newspaper editor if I were you......

Fat chance of that he'd have to learn to spell and get his grammar
correct, unless he snipped all the words from every article


Maxie, how is Dim Lin?

I don't keep track of your family

--
geoff
  #129   Report Post  
IMM
 
Posts: n/a
Default


"raden" wrote in message
...
In message , IMM writes


I think that when you did your original snipping, that you snipped the
important bit which was *not* to use a hacksaw, but left the tripe
behind.

I wouldn't apply for a job as newspaper editor if I were you......

Fat chance of that he'd have to learn to spell and get his grammar
correct, unless he snipped all the words from every article


Maxie, how is Dim Lin?

I don't keep track of your family


Now Maxie. I know you want to hide the existence of Dim Lin the luscious
far eastern lovely; the Oriental enchantress.



  #130   Report Post  
IMM
 
Posts: n/a
Default


"raden" wrote in message
...
In message , IMM writes
The above clearly says that a specialist pipe cutter tool need not be

used.
Can you understand that? Nah don't reply, you can't.

So just tell us what it says about using a hacksaw ...


Maxie, it says a secialist tool need not be used.


snip disjointed babble by Maxie, who is besotted by an Oriental
enchantress




  #131   Report Post  
IMM
 
Posts: n/a
Default


"Andy Hall" wrote in message
...
On Mon, 8 Nov 2004 00:07:04 -0000, "IMM" wrote:


"raden" wrote in message
...
In message , IMM

writes

When you're in a hole, STOP DIGGING.
You're in danger of falling out the other side of the

earth...

Not in a hole. Not digging. Hepworth said you don't need a
specialist
cutter. That was clear.

snip tripe

I think that when

snip tripe

Hepworth said you don't need a specialist cutter. That was clear.

What they actually said was:

The inventive can find many ways of achieving a perfectly acceptable
clean, square cut using a variety of tools."

The above clearly says that a specialist pipe cutter tool need not be

used.
Can you understand that? Nah don't reply, you can't.

So just tell us what it says about using a hacksaw ...


Maxie, it says a secialist tool need not be used.

Did you mean *socialist* tool?


If you say so.


  #132   Report Post  
Christian McArdle
 
Posts: n/a
Default

Maxie, it says a secialist tool need not be used.

Indeed. It is probably intended to mean that careful and skilled use of a
Stanley knife, or tin snips might get a good result, they having
specifically excluded hacksaws previously.

Christian.


  #133   Report Post  
Christian McArdle
 
Posts: n/a
Default

You couldn't make a joint with any tool.

There's only one tool in this thread.

Christian.


  #134   Report Post  
IMM
 
Posts: n/a
Default


"Christian McArdle" wrote in message
. net...
Maxie, it says a secialist tool need not be used.


Indeed. It is probably intended to mean that careful and skilled use of a
Stanley knife, or tin snips might get a good result, they having
specifically excluded hacksaws previously.


Cutting the pipe is err, er, er cutting the pipe. It is how you finish it
that matters.


  #135   Report Post  
IMM
 
Posts: n/a
Default


"Christian McArdle" wrote in message
t...

You couldn't make a joint with any tool.


There's only one tool in this thread.


And that isn't a specialist pipe cutter.




  #136   Report Post  
Dave Plowman (News)
 
Posts: n/a
Default

In article ,
IMM wrote:
Cutting the pipe is err, er, er cutting the pipe. It is how you finish
it that matters.


Absolutely. Cut roughly to length with a hacksaw then make the accurate
cut with the correct tool. A win win situation as you would say. You've
justified the use of a hacksaw.

Since you've obviously never worked with plastic pipe, buy some and the
cutter. Do a proper cut. Then try and replicate that cut using hacksaw,
sharp knife, file, sandpaper etc. Or even your nailfile and dressmaking
scissors, since you seem to prefer anything but the correct tools.

You could even try a Rotozip since you seem to think it the answer to
everything. Perhaps that's why they went out of business?

Yet again, the one person on the group who claims to be a pro and all
others amateurs wants to avoid buying the appropriate tool for the job.

Which is the true sign of a penny pinching amateur. And worse, bodger.

--
*I used to have an open mind but my brains kept falling out *

Dave Plowman London SW
To e-mail, change noise into sound.
  #137   Report Post  
Dave Plowman (News)
 
Posts: n/a
Default

In article ,
Christian McArdle wrote:
You couldn't make a joint with any tool.


There's only one tool in this thread.


Unfare to tools. A tool by its very name must have a use.

--
*Many people quit looking for work when they find a job *

Dave Plowman London SW
To e-mail, change noise into sound.
  #138   Report Post  
IMM
 
Posts: n/a
Default


"Dave Plowman (News)" wrote in message
...
In article ,
Christian McArdle wrote:
You couldn't make a joint with any tool.


There's only one tool in this thread.


Unfare to tools. A tool by its very name must have a use.


You are obviously not a tool then.


  #139   Report Post  
IMM
 
Posts: n/a
Default


"Dave Plowman (News)" wrote in message
...
In article ,
IMM wrote:


Cutting the pipe is err, er, er cutting the pipe. It is how you finish
it that matters.


Absolutely.


Good nice to know you are learning a bit.

cut the rest by a man who wears yellow boots, as it is tripe




  #140   Report Post  
Dave Plowman (News)
 
Posts: n/a
Default

In article ,
IMM wrote:
Good nice to know you are learning a bit.


cut by a man who wears yellow boots


Nice to know you're at last getting some dress sense even although colour
blind.

--
*Marriage changes passion - suddenly you're in bed with a relative*

Dave Plowman London SW
To e-mail, change noise into sound.


  #141   Report Post  
IMM
 
Posts: n/a
Default


"Dave Plowman (News)" wrote in message
...
In article ,
IMM wrote:
Good nice to know you are learning a bit.


How are your yellow DeWalt boots?


  #142   Report Post  
IMM
 
Posts: n/a
Default


"Christian McArdle" wrote in message
. net...
You are obviously not a tool then.


But you are, obviously.


Very useful then.


  #143   Report Post  
Dave Plowman (News)
 
Posts: n/a
Default

In article ,
IMM wrote:
Good nice to know you are learning a bit.


How are your yellow DeWalt boots?


You're replying to yourself now. Second sign of madness.

--
*Generally speaking, you aren't learning much if your lips are moving.*

Dave Plowman London SW
To e-mail, change noise into sound.
  #144   Report Post  
raden
 
Posts: n/a
Default

In message , IMM writes

"Christian McArdle" wrote in message
.net...
Maxie, it says a secialist tool need not be used.


Indeed. It is probably intended to mean that careful and skilled use of a
Stanley knife, or tin snips might get a good result, they having
specifically excluded hacksaws previously.


Cutting the pipe is err, er, er cutting the pipe. It is how you finish it
that matters.

Ah - words of experience

--
geoff
  #145   Report Post  
raden
 
Posts: n/a
Default

In message , IMM writes

"Christian McArdle" wrote in message
.net...
You are obviously not a tool then.


But you are, obviously.


Very useful then.


http://www.cogsci.princeton.edu/cgi-...ge=1&word=tool

I think the 4th definition is the one which refers to you

--
geoff


  #146   Report Post  
IMM
 
Posts: n/a
Default


"raden" wrote in message
...
In message , IMM writes

"Christian McArdle" wrote in message
.net...
You are obviously not a tool then.

But you are, obviously.


Very useful then.


snip tripe by Maxie

Maxie, you have sex on the brain. And after being captivated by an Oriental
enchantress. My, oh my.



  #147   Report Post  
IMM
 
Posts: n/a
Default


"raden" wrote in message
...
In message , IMM writes

"Christian McArdle" wrote in message
.net...
Maxie, it says a secialist tool need not be used.

Indeed. It is probably intended to mean that careful and skilled use of

a
Stanley knife, or tin snips might get a good result, they having
specifically excluded hacksaws previously.


Cutting the pipe is err, er, er cutting the pipe. It is how you finish

it
that matters.


Ah - words of experience


Too true, Maxie.



  #148   Report Post  
Phil Addison
 
Posts: n/a
Default

On Mon, 8 Nov 2004 21:35:31 -0000, "IMM" wrote:


"raden" wrote in message
...
In message , IMM writes

"Christian McArdle" wrote in message
.net...
You are obviously not a tool then.

But you are, obviously.

Very useful then.


snip tripe by Maxie

Maxie, you have sex on the brain. And after being captivated by an Oriental
enchantress. My, oh my.


Seems you are jealous. Not getting any yourself obviously.

Phil
The uk.d-i-y FAQ is at http://www.diyfaq.org.uk/
Remove NOSPAM from address to email me
  #149   Report Post  
IMM
 
Posts: n/a
Default


"Phil Addison" wrote in message
...
On Mon, 8 Nov 2004 21:35:31 -0000, "IMM" wrote:


"raden" wrote in message
...
In message , IMM

writes

"Christian McArdle" wrote in

message
.net...
You are obviously not a tool then.

But you are, obviously.

Very useful then.


snip tripe by Maxie

Maxie, you have sex on the brain. And after being captivated by an

Oriental
enchantress. My, oh my.


Seems you are jealous.


We should all be jealous of Maxie. Being captivated by an Oriental
Enchantress?


  #150   Report Post  
Dave Plowman (News)
 
Posts: n/a
Default

In article ,
Phil Addison wrote:
Maxie, you have sex on the brain. And after being captivated by an
Oriental enchantress. My, oh my.


Seems you are jealous. Not getting any yourself obviously.


I'd say finding a partner if you wear a tutu and have a boot fetish might
be a tad difficult. Not really a win win situation.

--
*The most wasted day of all is one in which we have not laughed.*

Dave Plowman London SW
To e-mail, change noise into sound.


  #151   Report Post  
Tim
 
Posts: n/a
Default

On Tue, 09 Nov 2004 13:43:52 +0000, Dave Plowman (News) wrote:

In article ,
Phil Addison wrote:
Maxie, you have sex on the brain. And after being captivated by an
Oriental enchantress. My, oh my.


Seems you are jealous. Not getting any yourself obviously.


I'd say finding a partner if you wear a tutu and have a boot fetish might
be a tad difficult. Not really a win win situation.


Could be advantageous in the right place, eg. Croydon. Might even get you a
spot on Eurotrash ;=D

Tim
  #152   Report Post  
IMM
 
Posts: n/a
Default


"Dave Plowman (News)" wrote in message
...
In article ,
Phil Addison wrote:
Maxie, you have sex on the brain. And after being captivated by an
Oriental enchantress. My, oh my.


Seems you are jealous. Not getting any yourself obviously.


I'd say finding a partner if you wear a tutu and have a boot fetish might
be a tad difficult. Not really a win win situation.


Are you after an Oriental Enchantress who wears big yellow boots just like
you? My, oh, my.


  #153   Report Post  
raden
 
Posts: n/a
Default

In message , Tim
writes
On Tue, 09 Nov 2004 13:43:52 +0000, Dave Plowman (News) wrote:

In article ,
Phil Addison wrote:
Maxie, you have sex on the brain. And after being captivated by an
Oriental enchantress. My, oh my.


Seems you are jealous. Not getting any yourself obviously.


I'd say finding a partner if you wear a tutu and have a boot fetish might
be a tad difficult. Not really a win win situation.


Could be advantageous in the right place, eg. Croydon. Might even get you a
spot on Eurotrash ;=D


But DIMM's an essex girl

--
geoff
  #154   Report Post  
IMM
 
Posts: n/a
Default


"raden" wrote in message
...
In message , Tim
writes
On Tue, 09 Nov 2004 13:43:52 +0000, Dave Plowman (News) wrote:

In article ,
Phil Addison wrote:


Maxie, you have sex on the brain. And
after being captivated by an
Oriental enchantress. My, oh my.

Seems you are jealous. Not getting any
yourself obviously.

I'd say finding a partner if you wear a
tutu and have a boot fetish might
be a tad difficult. Not really a win win situation.


Could be advantageous in the right place,
eg. Croydon. Might even get you a
spot on Eurotrash ;=D


But DIMM's an essex girl


Maxie, DIMM is a memory.




  #155   Report Post  
raden
 
Posts: n/a
Default

In message , IMM writes
Could be advantageous in the right place,
eg. Croydon. Might even get you a
spot on Eurotrash ;=D


But DIMM's an essex girl


Maxie, DIMM is a memory.

Altzheimers or split personality ?

--
geoff


  #156   Report Post  
IMM
 
Posts: n/a
Default


"raden" wrote in message
...
In message , IMM writes
Could be advantageous in the right place,
eg. Croydon. Might even get you a
spot on Eurotrash ;=D

But DIMM's an essex girl


Maxie, DIMM is a memory.

Altzheimers or split personality ?


Maxie, do you have memory blots when you think of Dim Lin the Oriental
enchantress. It's all coming out now.


  #157   Report Post  
IMM
 
Posts: n/a
Default


"Dave Plowman (News)" wrote in message
...
In article ,
IMM wrote:


Good nice to know you are learning a bit.


How are your yellow DeWalt boots?


snip tripe

How do you clean those yellow boots?


  #158   Report Post  
Dave Plowman (News)
 
Posts: n/a
Default

In article ,
IMM wrote:
How do you clean those yellow boots?


Is yours simply a boot fetish, or feet too?

--
*If at first you don't succeed, destroy all evidence that you tried *

Dave Plowman London SW
To e-mail, change noise into sound.
  #159   Report Post  
raden
 
Posts: n/a
Default

In message , IMM writes

"raden" wrote in message
...
In message , IMM writes
Could be advantageous in the right place,
eg. Croydon. Might even get you a
spot on Eurotrash ;=D

But DIMM's an essex girl

Maxie, DIMM is a memory.

Altzheimers or split personality ?


Maxie, do you have memory blots when you think of Dim Lin the Oriental
enchantress. It's all coming out now.

Your overactive imagination is also having an adverse effect

what's it called when someone has problems separating fantasy from
reality ?

whatever it is, you have that too

or to use the correct medical term, you're mentally ****ed, but we knew
that anyway didn't we

--
geoff
  #160   Report Post  
IMM
 
Posts: n/a
Default


"raden" wrote in message
...
In message , IMM writes

"raden" wrote in message
...
In message , IMM

writes
Could be advantageous in the right place,
eg. Croydon. Might even get you a
spot on Eurotrash ;=D

But DIMM's an essex girl

Maxie, DIMM is a memory.

Altzheimers or split personality ?


Maxie, do you have memory blots when you think of Dim Lin the Oriental
enchantress? It's all coming out now.


Your overactive imagination is
also having an adverse effect

what's it called when someone has
problems separating fantasy from
reality ?


Maxie, Dim Lin the Oriental Enchantress is very real. You go to the Far
East regularly. You told us.

snip disjointed babble by Maxie



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +1. The time now is 03:13 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"