Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
replacing the glass in doors?
We have two back doors, both in different rooms, both with about 12 panes of
6x9 glass (or so) in them. There is nothing wrong with the doors apart from they need a paint and some of the glass is mismatched. I thought I'd strip them both down, and replace the glass with new clear and wondered if I should 'upgrade' the glass in an effort to make our house ever so slightly warmer (I have an ongoing project to remove draughts etc). Is it worthwhile? If so what sort of spec glass should I go for? TIA David |
#2
|
|||
|
|||
"DavidD" wrote in message . .. We have two back doors, both in different rooms, both with about 12 panes of 6x9 glass (or so) in them. There is nothing wrong with the doors apart from they need a paint and some of the glass is mismatched. I thought I'd strip them both down, and replace the glass with new clear and wondered if I should 'upgrade' the glass in an effort to make our house ever so slightly warmer (I have an ongoing project to remove draughts etc). Is it worthwhile? If so what sort of spec glass should I go for? You will be required to use 6mm glass (it probably is already unless it's quite old). I presume you are thinking of K glass like the use in double glazing. Not sure how available that is and whether it would make a difference worth the price if not used as part of a double glazing set up. A curtain across the door(s) would be cheaper and a lot more effective, jeeping heat in and draughts out. -- Bob Mannix (anti-spam is as easy as 1-2-3 - not) |
#3
|
|||
|
|||
|
#4
|
|||
|
|||
In article ,
DavidD wrote: We have two back doors, both in different rooms, both with about 12 panes of 6x9 glass (or so) in them. There is nothing wrong with the doors apart from they need a paint and some of the glass is mismatched. I thought I'd strip them both down, and replace the glass with new clear and wondered if I should 'upgrade' the glass in an effort to make our house ever so slightly warmer (I have an ongoing project to remove draughts etc). Is it worthwhile? If so what sort of spec glass should I go for? The only thing that will make a worthwhile difference is double glazed panels. Solid glass - no matter how thick - will conduct the 'cold'. -- *If your feet smell and your nose runs, you're built upside down. Dave Plowman London SW To e-mail, change noise into sound. |
#5
|
|||
|
|||
Ziggur wrote: Nope! The requirement is for "Safety Glass". Could be 4mm Toughened or Laminated. Go read the regs carefully. 6mm is suitable for panes of limited size. |
#6
|
|||
|
|||
"Mike" wrote in message . net... Ziggur wrote: Nope! The requirement is for "Safety Glass". Could be 4mm Toughened or Laminated. Go read the regs carefully. 6mm is suitable for panes of limited size. In detail panes less than 250mm wide beween glazing beads (and with an area not exceeding 0.5m^2 but you never usually reach that) can be of 6mm annealed glass. Above this size, safety glass is only required in windows where the glass is below 800mm from the floor and, in doors, where it is below 1500mm from the floor. I believe "outbuildings" are not covered by these regulations - at least I was able to buy a ~1m square sheet of 6mm for my old garage. I should say this replaced a sheet of 3-4mm glass which my son had sent a football through. I'm not a particularly nervous or sensationalist type when it comes to safety but, had I been stood at my workbench at the time I would have been hospitalized given the huge area of the garage that was filled with medium size shards of razor sharp glass. The 6mm probably wouldn't have broken anyway and the weight of the glass would have limited the danger area - I feel a lot happier behind the 6mm! -- Bob Mannix (anti-spam is as easy as 1-2-3 - not) |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
cutting glass tubing | Metalworking | |||
New Front Door(s) | Home Repair |