Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Water Damage to Kitchen Worktop
A leaking kettle has damage the newly installed laminated chipboard
worktop in my kitchen. A raised area/blister approx 8 x 3cm and 1mm high has appeared at the butt joint. As you might guess, the joint lies over the edges of two carcases and the application of a clamp is impossible. Can anyone please tell me how i can remove the blister and re-seal the joint with out major damage. The replacement of the worktop is a non-starter, i just could not face it after taking such a long time to complete the kitchen! I would be very grateful for your help. Regards, Simon |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
AquaTherm Furnace - No Hot Water Issue | Home Repair | |||
Water Softeners, good or bad?? | Home Repair | |||
Copper pipe sizing. Is bigger better? | Home Repair | |||
Flushing / Cleaning Hot Water Heater Help Needed | Home Repair | |||
Kitchen Aid Side-by-side - Water Dispenser/Filter Problem | Home Repair |