A branch has come off a larch at the end of our garden. I have a wood
burning stove so Im always on the look out for good wood to burn. The
question is, is it good, at least from a soot and creosote/tar point of
view?

Ive read that it burns €œhot€� which I guess is good from the point of view
of not clagging your chimney with residues but it seems very resinous and
Im not sure whether lots of resin equates to more creosote & tar
deposition. My gut feeling is that it will but maybe this is offset by the
€œhot€� burning?

Any thoughts?

Tim

--
Please don't feed the trolls

On 09/04/2020 19:25, Tim+ wrote:
A branch has come off a larch at the end of our garden. I have a wood
burning stove so Im always on the look out for good wood to burn. The
question is, is it good, at least from a soot and creosote/tar point of
view?

Ive read that it burns €œhot€� which I guess is good from the point of view
of not clagging your chimney with residues but it seems very resinous and
Im not sure whether lots of resin equates to more creosote & tar
deposition. My gut feeling is that it will but maybe this is offset by the
€œhot€� burning?

Any thoughts?

Tim

if you burn it hot the resins will fully burn.
Ive found pine type wood to be good starter wood, but it is all over in
a flash.


--
New Socialism consists essentially in being seen to have your heart in
the right place whilst your head is in the clouds and your hand is in
someone else's pocket.

On 9 Apr 2020 18:25:11 GMT, Tim+ wrote:

A branch has come off a larch at the end of our garden. I have a wood
burning stove so I m always on the look out for good wood to burn.
The question is, is it good, at least from a soot and creosote/tar point
of view?

Cut, split, stack, cover wait till next winter or the winter after.
Burnt well the wood and resins will gasify and burn. I'd probably not
put it in until the stove is well hot and there is a good charcoal
bed burning well.

--
Cheers
Dave.

On Thursday, 9 April 2020 19:25:15 UTC+1, Tim+ wrote:
A branch has come off a larch at the end of our garden. I have a wood
burning stove so Im always on the look out for good wood to burn.. The
question is, is it good, at least from a soot and creosote/tar point of
view?

Ive read that it burns €œhot€� which I guess is good from the point of view
of not clagging your chimney with residues but it seems very resinous and
Im not sure whether lots of resin equates to more creosote & tar
deposition. My gut feeling is that it will but maybe this is offset by the
€œhot€� burning?

Any thoughts?


Tar and soot is caused by badly designed stoves causing quenching, ie removal of heat from the combustion gases before combustion is complete.
Combustion then stops prematurely leaving unburned fuel vapours. (which condenses out in the chimney)
http://eyrie.shef.ac.uk/will/eee/cpe630/comfun8.html

Wet/damp wood doesn't help either, also causing quenching and using up energy to evaporate it off.

All wood is suitable for burning. Dense heavy wood is the best from storage and stoking point of view. (More energy dense.)

On Thu, 09 Apr 2020 18:25:11 +0000, Tim+ wrote:

A branch has come off a larch at the end of our garden. I have a wood
burning stove so Im always on the look out for good wood to burn. The
question is, is it good, at least from a soot and creosote/tar point of
view?

Ive read that it burns €œhot€� which I guess is good from the point of
view of not clagging your chimney with residues but it seems very
resinous and Im not sure whether lots of resin equates to more creosote
& tar deposition. My gut feeling is that it will but maybe this is
offset by the €œhot€� burning?

Any thoughts?

Tim

I have a few 'pine' trees in the garden and over the years have thinned a
burnt a number of them in the stove. I'd cut it into suitable lengths
and then leave it to weather/season/dry for (ideally) a couple of years
and then use it. It *will* burn hot and fast so is ideal if you want a
quick burst of heat.

On 09/04/2020 19:25, Tim+ wrote:
A branch has come off a larch at the end of our garden. I have a wood
burning stove so Im always on the look out for good wood to burn. The
question is, is it good, at least from a soot and creosote/tar point of
view?

Depends a bit how big the branch is. Dead bits that drop off my pine
tree after being left to dry dry out make good firelighters.

Ive read that it burns €œhot€� which I guess is good from the point of view
of not clagging your chimney with residues but it seems very resinous and
Im not sure whether lots of resin equates to more creosote & tar
deposition. My gut feeling is that it will but maybe this is offset by the
€œhot€� burning?

Any thoughts?

It burns rather quickly. So long as it is good and dry and burnt with
plenty of air putting some in with other hardwoods won't be a problem.
I wouldn't burn resinous softwoods exclusively though - that is asking
for trouble. Likewise with burning it whilst it is still too wet.

--
Regards,
Martin Brown

Martin Brown wrote:
On 09/04/2020 19:25, Tim+ wrote:
A branch has come off a larch at the end of our garden. I have a wood
burning stove so Im always on the look out for good wood to burn. The
question is, is it good, at least from a soot and creosote/tar point of
view?

Depends a bit how big the branch is. Dead bits that drop off my pine
tree after being left to dry dry out make good firelighters.

Ive read that it burns €œhot€� which I guess is good from the point of view
of not clagging your chimney with residues but it seems very resinous and
Im not sure whether lots of resin equates to more creosote & tar
deposition. My gut feeling is that it will but maybe this is offset by the
€œhot€� burning?

Any thoughts?

It burns rather quickly. So long as it is good and dry and burnt with
plenty of air putting some in with other hardwoods won't be a problem.
I wouldn't burn resinous softwoods exclusively though - that is asking
for trouble. Likewise with burning it whilst it is still too wet.


Itll probably be the winter after next before Ill need it. Got plenty of
wood in store.

Tim

--
Please don't feed the trolls