Why do LEDs generate heat? I want a technical answer not "because they're inefficient". And will we ever make them more efficient?

On Thursday, 3 October 2019 14:29:30 UTC+1, Commander Kinsey wrote:
Why do LEDs generate heat? I want a technical answer not "because they're inefficient".

That is the technical answer just lioke why does a wire get hot when curremnt passes through it.

And will we ever make them more efficient?

Probably.

On Thu, 03 Oct 2019 14:37:34 +0100, whisky-dave wrote:

On Thursday, 3 October 2019 14:29:30 UTC+1, Commander Kinsey wrote:
Why do LEDs generate heat? I want a technical answer not "because they're inefficient".

That is the technical answer just lioke why does a wire get hot when curremnt passes through it.

No, the technical answer would explain what part of it has resistance and if it can be overcome by using different materials. And are you sure it's even resistance? It could be some photons are reabsorbed before they escape the LED, generating heat.

And will we ever make them more efficient?

Probably.

On Thursday, 3 October 2019 14:45:38 UTC+1, Commander Kinsey wrote:
On Thu, 03 Oct 2019 14:37:34 +0100, whisky-dave wrote:

On Thursday, 3 October 2019 14:29:30 UTC+1, Commander Kinsey wrote:
Why do LEDs generate heat? I want a technical answer not "because they're inefficient".

That is the technical answer just like why does a wire get hot when curremnt passes through it.

No, the technical answer would explain what part of it has resistance.

Every conductor has resistance apart from perhaps a superconductor.
yuo also have theb curent passing from one type of conductor to another.
One of those conductors will convert the energy to light and heat.
They won;t create much IR or UV because the material chosen was chosen because it emits the required wavelengh of light and not much eles.

and if it can be overcome by using different materials.

No they have been trying for years and until someone can come up with a magic substance that has zero resistance that is.

And are you sure it's even resistance? It could be some photons are reabsorbed before they escape the LED, generating heat.

No that would be IR 'heat' , and why would photons be re-absorbed anyway ?



And will we ever make them more efficient?

Probably.

On Thu, 03 Oct 2019 14:58:46 +0100, whisky-dave wrote:

On Thursday, 3 October 2019 14:45:38 UTC+1, Commander Kinsey wrote:
On Thu, 03 Oct 2019 14:37:34 +0100, whisky-dave wrote:

On Thursday, 3 October 2019 14:29:30 UTC+1, Commander Kinsey wrote:
Why do LEDs generate heat? I want a technical answer not "because they're inefficient".

That is the technical answer just like why does a wire get hot when curremnt passes through it.

No, the technical answer would explain what part of it has resistance.

Every conductor has resistance apart from perhaps a superconductor.
yuo also have theb curent passing from one type of conductor to another.

I assumed that the layers were so thin, resistance should be minimal. I guess transistors are the same and they get hot. Semiconductors probably have quite a high resistance?

One of those conductors will convert the energy to light and heat.
They won;t create much IR or UV because the material chosen was chosen because it emits the required wavelengh of light and not much eles.

and if it can be overcome by using different materials.

No they have been trying for years and until someone can come up with a magic substance that has zero resistance that is.

Well they've certainly improved the efficiency over the years. The question is how far can they get without using them at absolute zero? Or perhaps even a completely different way of generating light?

And are you sure it's even resistance? It could be some photons are reabsorbed before they escape the LED, generating heat.

No that would be IR 'heat' , and why would photons be re-absorbed anyway ?

Because they might not come out of the LED into the room, but hit another part of it internally.

On Thursday, 3 October 2019 15:10:44 UTC+1, Commander Kinsey wrote:
On Thu, 03 Oct 2019 14:58:46 +0100, whisky-dave wrote:

On Thursday, 3 October 2019 14:45:38 UTC+1, Commander Kinsey wrote:
On Thu, 03 Oct 2019 14:37:34 +0100, whisky-dave wrote:

On Thursday, 3 October 2019 14:29:30 UTC+1, Commander Kinsey wrote:
Why do LEDs generate heat? I want a technical answer not "because they're inefficient".

That is the technical answer just like why does a wire get hot when curremnt passes through it.

No, the technical answer would explain what part of it has resistance.

Every conductor has resistance apart from perhaps a superconductor.
yuo also have theb curent passing from one type of conductor to another.

I assumed that the layers were so thin, resistance should be minimal.

Depending on yuor refernce point for thin and minimal.

I guess transistors are the same and they get hot. Semiconductors probably have quite a high resistance?

Well yes compared to low or zero.


One of those conductors will convert the energy to light and heat.
They won;t create much IR or UV because the material chosen was chosen because it emits the required wavelengh of light and not much eles.

and if it can be overcome by using different materials.

No they have been trying for years and until someone can come up with a magic substance that has zero resistance that is.

Well they've certainly improved the efficiency over the years. The question is how far can they get without using them at absolute zero? Or perhaps even a completely different way of generating light?

There's bio-luminescence and using a lattice structure like butterfly wings that could be used and have been used in high end modern displays.
But bio-luminescence is diffiuclt to control at speed.


And are you sure it's even resistance? It could be some photons are reabsorbed before they escape the LED, generating heat.

No that would be IR 'heat' , and why would photons be re-absorbed anyway ?

Because they might not come out of the LED into the room, but hit another part of it internally.

White LEDs do that and some other colours but I doubt much heat is generated.

On Thu, 3 Oct 2019 06:58:46 -0700 (PDT), whisky-depraved, the notorious,
troll-feeding, senile idiot, blabbered again:

FLUSH the senile asshole's latest idiotic ****

Starting another one of your notorious retarded "conversations" with the
sociopath, you senile asshole? BG

On 03/10/2019 14:45, Commander Kinsey wrote:
On Thu, 03 Oct 2019 14:37:34 +0100, whisky-dave
wrote:

On Thursday, 3 October 2019 14:29:30 UTC+1, Commander Kinsey* wrote:
Why do LEDs generate heat? I want a technical answer not "because
they're inefficient".

That is the technical answer just lioke why does a wire get hot when
curremnt passes through it.

No, the technical answer would explain what part of it has resistance
and if it can be overcome by using different materials.* And are you

It is resistance in the sense that there is some frictional losses to
the movement of current in the crystal lattice. Early LEDs you could
bump up the quantum efficiency by stiffening it - immersing in LN2
worked a few times before thermal cycling killed it stone dead.

sure it's even resistance?* It could be some photons are reabsorbed
before they escape the LED, generating heat.

White LEDs rely on a yellow phosphor absorbing and re-emitting blue
photons to make a perceived white light. Coloured LEDs typically have a
forward voltage related to the energy of photon that they emit.

There is a hit for doing that that limits ultimate efficiency to
something like 40% of power consumed out as useful light.

For comparison a tungsten light bulb is only about 2% efficient at
making visible light.

And will we ever make them more efficient?

Probably.

Quantum efficiency and efficacy of LEDs has been improving with time.
Cree have production models at 100Lm/W another factor of 2.5
improvement is theoretically possible and the odd sample has been made
but the problems of making such a device in production quantities isn't
cost effective at present. Cost per lumen and total flux graphs show how
much improvement there has been since the first LED indicators in 1970.

https://en.wikipedia.org/wiki/Light-...bre akthrough

--
Regards,
Martin Brown

On Thu, 03 Oct 2019 15:08:43 +0100, Martin Brown wrote:

On 03/10/2019 14:45, Commander Kinsey wrote:
On Thu, 03 Oct 2019 14:37:34 +0100, whisky-dave
wrote:

On Thursday, 3 October 2019 14:29:30 UTC+1, Commander Kinsey wrote:
Why do LEDs generate heat? I want a technical answer not "because
they're inefficient".

That is the technical answer just lioke why does a wire get hot when
curremnt passes through it.

No, the technical answer would explain what part of it has resistance
and if it can be overcome by using different materials. And are you

It is resistance in the sense that there is some frictional losses to
the movement of current in the crystal lattice. Early LEDs you could
bump up the quantum efficiency by stiffening it - immersing in LN2
worked a few times before thermal cycling killed it stone dead.

sure it's even resistance? It could be some photons are reabsorbed
before they escape the LED, generating heat.

White LEDs rely on a yellow phosphor absorbing and re-emitting blue
photons to make a perceived white light. Coloured LEDs typically have a
forward voltage related to the energy of photon that they emit.

There is a hit for doing that that limits ultimate efficiency to
something like 40% of power consumed out as useful light.

I didn't realise that, I thought white LEDs were designed to directly emit a handful of different visible light wavelengths to make white. Is there a reason this can't be done? An LED can make anything in the visible light spectrum, so surely a mixture of them would be more efficient than using phosphors? There could even be seperate LEDs within the housing, like growlamps which have visible, IR, and UV LEDs.

For comparison a tungsten light bulb is only about 2% efficient at
making visible light.

And will we ever make them more efficient?

Probably.

Quantum efficiency and efficacy of LEDs has been improving with time.
Cree have production models at 100Lm/W another factor of 2.5
improvement is theoretically possible and the odd sample has been made
but the problems of making such a device in production quantities isn't
cost effective at present. Cost per lumen and total flux graphs show how
much improvement there has been since the first LED indicators in 1970.

https://en.wikipedia.org/wiki/Light-...bre akthrough

That graph looks very promising.

On 03/10/2019 15:16, Commander Kinsey wrote:
On Thu, 03 Oct 2019 15:08:43 +0100, Martin Brown
wrote:

On 03/10/2019 14:45, Commander Kinsey wrote:
On Thu, 03 Oct 2019 14:37:34 +0100, whisky-dave
wrote:

On Thursday, 3 October 2019 14:29:30 UTC+1, Commander Kinsey* wrote:
Why do LEDs generate heat? I want a technical answer not "because
they're inefficient".

That is the technical answer just lioke why does a wire get hot when
curremnt passes through it.

No, the technical answer would explain what part of it has resistance
and if it can be overcome by using different materials.* And are you

It is resistance in the sense that there is some frictional losses to
the movement of current in the crystal lattice. Early LEDs you could
bump up the quantum efficiency by stiffening it - immersing in LN2
worked a few times before thermal cycling killed it stone dead.

sure it's even resistance?* It could be some photons are reabsorbed
before they escape the LED, generating heat.

White LEDs rely on a yellow phosphor absorbing and re-emitting blue
photons to make a perceived white light. Coloured LEDs typically have a
forward voltage related to the energy of photon that they emit.

There is a hit for doing that that limits ultimate efficiency to
something like 40% of power consumed out as useful light.

I didn't realise that, I thought white LEDs were designed to directly
emit a handful of different visible light wavelengths to make white.* Is
there a reason this can't be done?* An LED can make anything in the
visible light spectrum, so surely a mixture of them would be more
efficient than using phosphors?* There could even be seperate LEDs
within the housing, like growlamps which have visible, IR, and UV LEDs.

Tricolour can also be done but at the moment super efficient blue photon
production and then down convert to yellow to get white is best.

You can get tricolour high power LEDs that can be mixed to generate any
colour in consumer grade and theatre grade lighting systems too.

Magenta Growlights that only have blue and red LEDs are also now fairly
common. No point in having any green since chlorophyll reflects it.


--
Regards,
Martin Brown

On 03/10/2019 15:16, Commander Kinsey wrote:
On Thu, 03 Oct 2019 15:08:43 +0100, Martin Brown
wrote:

White LEDs rely on a yellow phosphor absorbing and re-emitting blue
photons to make a perceived white light. Coloured LEDs typically have a
forward voltage related to the energy of photon that they emit.

There is a hit for doing that that limits ultimate efficiency to
something like 40% of power consumed out as useful light.

I didn't realise that, I thought white LEDs were designed to directly
emit a handful of different visible light wavelengths to make white.* Is
there a reason this can't be done?* An LED can make anything in the
visible light spectrum, so surely a mixture of them would be more
efficient than using phosphors?* There could even be seperate LEDs
within the housing, like growlamps which have visible, IR, and UV LEDs.

You can have red, green and blue LEDs to make up white, but it's less
efficient and usually not worth doing unless you want to vary the hue.

--
Max Demian

On Thu, 3 Oct 2019 15:08:43 +0100, Martin Brownnoser, another troll-feeding,
senile idiot, blathered:


https://en.wikipedia.org/wiki/Light-...bre akthrough

The trolling ****** thanks you nicely for yet another big load of
troll-fodder, you demented troll-feeding senile asshole! tsk

"Commander Kinsey" wrote in message
news
On Thu, 03 Oct 2019 14:37:34 +0100, whisky-dave
wrote:

On Thursday, 3 October 2019 14:29:30 UTC+1, Commander Kinsey wrote:
Why do LEDs generate heat? I want a technical answer not "because
they're inefficient".

That is the technical answer just lioke why does a wire get hot when
curremnt passes through it.

No, the technical answer would explain what part of it has resistance

The diode that produces the light.

and if it can be overcome by using different materials.

There are no light emitting diodes which don't have resistance.

And are you sure it's even resistance?

Yes it is. And trivial to measure that.

It could be some photons are reabsorbed before they escape the LED,
generating heat.

Nope.

And will we ever make them more efficient?

Probably.

On Fri, 4 Oct 2019 03:16:40 +1000, cantankerous trolling geezer Rodent
Speed, the auto-contradicting senile sociopath, blabbered, again:

The diode that produces the light.

Talking of light, is still dark outside in Australia at 03:16 am, you
abnormal senile idiot who gets up every night between 1 and 4 am, just so he
can continue with his pathological trolling without too long a break!

--
Website (from 2007) dedicated to the 85-year-old trolling senile
cretin from Oz:
https://www.pcreview.co.uk/threads/r...d-faq.2973853/

On Thu, 3 Oct 2019 06:37:34 -0700 (PDT), whisky-depraved, the notorious,
troll-feeding, senile idiot, blabbered again:


That is the technical answer just lioke why does a wire get hot when curremnt passes through it.

And will we ever make them more efficient?

Probably.

Trust that you senile ****** will be the first to take that
attention-starved ******'s latest bait! tsk

On Thursday, 3 October 2019 15:57:17 UTC+1, Peeler wrote:
On Thu, 3 Oct 2019 06:37:34 -0700 (PDT), whisky-depraved, the notorious,
troll-feeding, senile idiot, blabbered again:


That is the technical answer just lioke why does a wire get hot when curremnt passes through it.

And will we ever make them more efficient?

Probably.

Trust that you senile ****** will be the first to take that
attention-starved ******'s latest bait! tsk

It's called education when student(s) ask me Qs I'm meant to answer them.
I'm so used to it, I sort of do it automatically.

Yesterday I was asked one Q about 4 times.

Student(s) :- Where do you keep the croc clips. ?
Me : I've hidden them in the draw labled croc clips (with a picture of a croc clip and a croc clip stuck to the draw handle.


Student :- What's the differnce between a 5mm LED and a 2mm LED
Me :- 2mm

On Fri, 4 Oct 2019 03:32:54 -0700 (PDT), whisky-depraved, the notorious,
troll-feeding, senile idiot, blabbered again:


Trust that you senile ****** will be the first to take that
attention-starved ******'s latest bait! tsk

It's called education when student(s) ask me Qs

No, it's called TROLL-FEEDING, you demented senile idiot!

One obviously has inefficiencies or the perpetual motion machine would be
everywhere.

Brian

--
----- --
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please
Note this Signature is meaningless.!
"whisky-dave" wrote in message
...
On Thursday, 3 October 2019 14:29:30 UTC+1, Commander Kinsey wrote:
Why do LEDs generate heat? I want a technical answer not "because they're
inefficient".

That is the technical answer just lioke why does a wire get hot when
curremnt passes through it.

And will we ever make them more efficient?

Probably.

That's different, that's asking for generating power from nothing. I just want something that changes electricity into light and nothing else. Or virtually nothing else, like 1% of it wasted. Current LEDs I'm told waste 60%.

On Thu, 03 Oct 2019 16:35:03 +0100, Brian Gaff wrote:

One obviously has inefficiencies or the perpetual motion machine would be
everywhere.

Brian

I doubt you're the only one wanting that. When they become avaible you be able to buy them, but for now it seems the more effiecient something is the more it costs, so don't expect them to be on ebay 100 for £1 or whatever.




On Thursday, 3 October 2019 16:38:56 UTC+1, Commander Kinsey wrote:
That's different, that's asking for generating power from nothing. I just want something that changes electricity into light and nothing else. Or virtually nothing else, like 1% of it wasted. Current LEDs I'm told waste 60%.

On Thu, 03 Oct 2019 16:35:03 +0100, Brian Gaff wrote:

One obviously has inefficiencies or the perpetual motion machine would be
everywhere.

Brian

Well huge strides have been made already, so I guess more will happen later on.


On Fri, 04 Oct 2019 11:38:26 +0100, whisky-dave wrote:

I doubt you're the only one wanting that. When they become avaible you be able to buy them, but for now it seems the more effiecient something is the more it costs, so don't expect them to be on ebay 100 for £1 or whatever.




On Thursday, 3 October 2019 16:38:56 UTC+1, Commander Kinsey wrote:
That's different, that's asking for generating power from nothing. I just want something that changes electricity into light and nothing else. Or virtually nothing else, like 1% of it wasted. Current LEDs I'm told waste 60%.

On Thu, 03 Oct 2019 16:35:03 +0100, Brian Gaff wrote:

One obviously has inefficiencies or the perpetual motion machine would be
everywhere.

Brian

On Fri, 4 Oct 2019 03:38:26 -0700 (PDT), whisky-depraved, the notorious,
troll-feeding, senile idiot, blabbered again:

I doubt you're the only one wanting that.

ALL he wants is for some senile idiot to come running along and feed him
every time and for as long as he wants to be fed, senile idiot!

On Thu, 3 Oct 2019 06:37:34 -0700 (PDT), whisky-dave
wrote:

On Thursday, 3 October 2019 14:29:30 UTC+1, Commander Kinsey wrote:
Why do LEDs generate heat? I want a technical answer not "because they're inefficient".

That is the technical answer just lioke why does a wire get hot when curremnt passes through it.

And will we ever make them more efficient?

Probably.


If you plot voltage across the LED versus current through it, the
curve is not linear like a resistor. At low voltage it hardly
conducts, but at higher voltage it conducts a lot, and the curve
flattens like a not very good zener diode, limiting the voltage.

Voltage times current equals watts i.e. heat plus a little light.
Light has a power but it's miniscule. Complicated physics theory might
explain how the light is produced and why so little of it, but we
lesser mortals wouldn't be able to understand it.
--
Dave W

On 04/10/2019 23:54, Dave W wrote:
Light has a power but it's miniscule.

No, it isnt.

Solar panels at midday work.
Sunlight in the tropics at midday us around 1KW/sq m.


Complicated physics theory might
explain how the light is produced and why so little of it,

It isn in the case of LEDS quite a lot. IIRC 10% efficient or thereabouts.

the current knock electrons into higher orbits, as they fall back they
emit photons.

but we
lesser mortals wouldn't be able to understand it.

Nobody understands anything completely


--
There is something fascinating about science. One gets such wholesale
returns of conjecture out of such a trifling investment of fact.

Mark Twain

On Fri, 04 Oct 2019 23:54:39 +0100, Dave W wrote:

On Thu, 3 Oct 2019 06:37:34 -0700 (PDT), whisky-dave
wrote:

On Thursday, 3 October 2019 14:29:30 UTC+1, Commander Kinsey wrote:
Why do LEDs generate heat? I want a technical answer not "because they're inefficient".

That is the technical answer just lioke why does a wire get hot when curremnt passes through it.

And will we ever make them more efficient?

Probably.

If you plot voltage across the LED versus current through it, the
curve is not linear like a resistor. At low voltage it hardly
conducts, but at higher voltage it conducts a lot, and the curve
flattens like a not very good zener diode, limiting the voltage.

It only limits it for a while, then you get smoke.

Voltage times current equals watts i.e. heat plus a little light.
Light has a power but it's miniscule. Complicated physics theory might
explain how the light is produced and why so little of it, but we
lesser mortals wouldn't be able to understand it.

I always thought an incandescent bulb was 1% light, 99% heat.
A fluorescent tube was 5% light, 95% heat.
And an LED was 10% light, 90% heat.

As a ratio those are about right. 100W tungsten = 20W fluorescent = 10W LED.

But I've been told elsewhere that LEDs are 40% efficient.

On Sat, 05 Oct 2019 18:23:35 +0100, "Commander Kinsey"
wrote:

On Fri, 04 Oct 2019 23:54:39 +0100, Dave W wrote:

On Thu, 3 Oct 2019 06:37:34 -0700 (PDT), whisky-dave
wrote:

On Thursday, 3 October 2019 14:29:30 UTC+1, Commander Kinsey wrote:
Why do LEDs generate heat? I want a technical answer not "because they're inefficient".

That is the technical answer just lioke why does a wire get hot when curremnt passes through it.

And will we ever make them more efficient?

Probably.

If you plot voltage across the LED versus current through it, the
curve is not linear like a resistor. At low voltage it hardly
conducts, but at higher voltage it conducts a lot, and the curve
flattens like a not very good zener diode, limiting the voltage.

It only limits it for a while, then you get smoke.

Voltage times current equals watts i.e. heat plus a little light.
Light has a power but it's miniscule. Complicated physics theory might
explain how the light is produced and why so little of it, but we
lesser mortals wouldn't be able to understand it.

I always thought an incandescent bulb was 1% light, 99% heat.
A fluorescent tube was 5% light, 95% heat.
And an LED was 10% light, 90% heat.

As a ratio those are about right. 100W tungsten = 20W fluorescent = 10W LED.

But I've been told elsewhere that LEDs are 40% efficient.

OK I stand corrected, I think your efficiencies are right. Perhaps
it's "up to 40%" for exotic LED's.
--
Dave W

On Sat, 05 Oct 2019 23:13:25 +0100, Dave W, yet another mentally deficient,
troll-feeding, senile idiot, blathered:


OK I stand corrected,

LOL "Corrected" by a retard? Just HOW senile are all you troll-feeding
assholes on this ng?

On Sat, 05 Oct 2019 23:13:25 +0100, Dave W wrote:

On Sat, 05 Oct 2019 18:23:35 +0100, "Commander Kinsey"
wrote:

On Fri, 04 Oct 2019 23:54:39 +0100, Dave W wrote:

On Thu, 3 Oct 2019 06:37:34 -0700 (PDT), whisky-dave
wrote:

On Thursday, 3 October 2019 14:29:30 UTC+1, Commander Kinsey wrote:
Why do LEDs generate heat? I want a technical answer not "because they're inefficient".

That is the technical answer just lioke why does a wire get hot when curremnt passes through it.

And will we ever make them more efficient?

Probably.

If you plot voltage across the LED versus current through it, the
curve is not linear like a resistor. At low voltage it hardly
conducts, but at higher voltage it conducts a lot, and the curve
flattens like a not very good zener diode, limiting the voltage.

It only limits it for a while, then you get smoke.

Voltage times current equals watts i.e. heat plus a little light.
Light has a power but it's miniscule. Complicated physics theory might
explain how the light is produced and why so little of it, but we
lesser mortals wouldn't be able to understand it.

I always thought an incandescent bulb was 1% light, 99% heat.
A fluorescent tube was 5% light, 95% heat.
And an LED was 10% light, 90% heat.

As a ratio those are about right. 100W tungsten = 20W fluorescent = 10W LED.

But I've been told elsewhere that LEDs are 40% efficient.

OK I stand corrected, I think your efficiencies are right. Perhaps
it's "up to 40%" for exotic LED's.

Exotic? Surely the room lighting ones are the most efficient, as that's what they're designed to do?

On Thu, 03 Oct 2019 14:29:30 +0100, Commander Kinsey wrote:

Why do LEDs generate heat? I want a technical answer not "because they're inefficient". And will we ever make them more efficient?

I got useful answers from Quora:

"LEDs are ever more and more efficient. In the last 40 years, tremendous strides have been made. They generate heat because they are conducting electricity through semiconductors. Unlike metals which have very little resistance to electric currents, semiconductors offer more resistance. Not as much as true nonmetals, but still more than metals. It is the resistance of the semiconductor layers, both N and P, and the resistance of the junction itself, that generate the heat."

"Every electronic device is less than 100 percent efficient. On a low level, it is due to the law of probability, or as the physicists call it, entropy. The odds of all those electrons conveying their energy into photons is very low. Some are always making random transitions, generating heat instead of light."

On Thursday, 3 October 2019 14:49:47 UTC+1, Commander Kinsey wrote:
On Thu, 03 Oct 2019 14:29:30 +0100, Commander Kinsey wrote:

Why do LEDs generate heat? I want a technical answer not "because they're inefficient". And will we ever make them more efficient?

I got useful answers from Quora:

"LEDs are ever more and more efficient. In the last 40 years, tremendous strides have been made. They generate heat because they are conducting electricity through semiconductors. Unlike metals which have very little resistance to electric currents, semiconductors offer more resistance. Not as much as true nonmetals, but still more than metals. It is the resistance of the semiconductor layers, both N and P, and the resistance of the junction itself, that generate the heat."

pretty much what I"ve just said. without Quora.



"Every electronic device is less than 100 percent efficient. On a low level, it is due to the law of probability, or as the physicists call it, entropy. The odds of all those electrons conveying their energy into photons is very low. Some are always making random transitions, generating heat instead of light."

On Thu, 03 Oct 2019 15:01:34 +0100, whisky-dave wrote:

On Thursday, 3 October 2019 14:49:47 UTC+1, Commander Kinsey wrote:
On Thu, 03 Oct 2019 14:29:30 +0100, Commander Kinsey wrote:

Why do LEDs generate heat? I want a technical answer not "because they're inefficient". And will we ever make them more efficient?

I got useful answers from Quora:

"LEDs are ever more and more efficient. In the last 40 years, tremendous strides have been made. They generate heat because they are conducting electricity through semiconductors. Unlike metals which have very little resistance to electric currents, semiconductors offer more resistance. Not as much as true nonmetals, but still more than metals. It is the resistance of the semiconductor layers, both N and P, and the resistance of the junction itself, that generate the heat."

pretty much what I"ve just said. without Quora.

The answers I pasted were far more detailed. I did say I wanted a technical answer.

"Every electronic device is less than 100 percent efficient. On a low level, it is due to the law of probability, or as the physicists call it, entropy. The odds of all those electrons conveying their energy into photons is very low. Some are always making random transitions, generating heat instead of light."

On Thu, 3 Oct 2019 07:01:34 -0700 (PDT), whisky-depraved, the notorious,
troll-feeding, senile idiot, blabbered again:

FLUSH the two prize idiots' usual bull**** unread again

So for how long are you two prize idiots going to go on like this, this
time? A few days? A few weeks again? Bunch of mentally disturbed idiots!
tsk

On Thu, 03 Oct 2019 14:29:30 +0100, Birdbrain Macaw (aka "Commander Kinsey",
"James Wilkinson", "Steven ******","Bruce Farquar", "Fred Johnson, etc.),
the pathological resident idiot and attention whore of all the uk ngs,
blathered again:

FLUSH the abnormal sociopathic attention whore's latest idiotic
attention-baiting bull**** unread again

So you HAD to crosspost your newest bait to FOUR different groups again,
just so you could get all the more attention, you attention-starved,
sociopathic ******!

--
about Birdbrain Macaw's (now "James Wilkinson" LOL)
trolling:
"He is a well known attention seeking troll and every reply you
make feeds him.
Starts many threads most of which die quick as on the UK groups anyone
with sense Kill filed him ages ago which is why he now cross posts to
the US groups for a new audience.
This thread was unusual in that it derived and continued without him
to a large extent and his silly questioning is an attempt to get
noticed again."
MID:

--
ItsJoanNotJoann addressing Birdbrain Macaw's (now "James Wilkinson" LOL):
"You're an annoying troll and I'm done with you and your
stupidity."
MID:

--
AndyW addressing Birdbrain:
"Troll or idiot?...
You have been presented with a viewpoint with information, reasoning,
historical cases, citations and references to back it up and wilfully
ignore all going back to your idea which has no supporting information."
MID:

--
Phil Lee adressing Birdbrain Macaw:
"You are too stupid to be wasting oxygen."
MID:

--
Phil Lee describing Birdbrain Macaw:
"I've never seen such misplaced pride in being a ****ing moronic motorist."
MID:

--
Tony944 addressing Birdbrain Macaw:
"I seen and heard many people but you are on top of list being first class
ass hole jerk. ...You fit under unconditional Idiot and should be put in
mental institution.
MID:

--
Pelican to Birdbrain Macaw:
"Ok. I'm persuaded . You are an idiot."
MID:

--
DerbyDad03 addressing Birdbrain Macaw (now "James Wilkinson" LOL):
"Frigging Idiot. Get the hell out of my thread."
MID:

--
Kerr Mudd-John about Birdbrain Macaw (now "James Wilkinson" LOL):
"It's like arguing with a demented frog."
MID:

--
Mr Pounder Esquire about Birdbrain Macaw (now "James Wilkinson" LOL):
"the **** poor delivery boy with no hot running water, 11 cats and
several parrots living in his hovel."
MID:

--
Rob Morley about Birdbrain:
"He's a perennial idiot"
MID: 20170519215057.56a1f1d4@Mars

--
JoeyDee to Birdbrain
"I apologize for thinking you were a jerk. You're just someone with an IQ
lower than your age, and I accept that as a reason for your comments."
MID: l-september.org

--
Sam Plusnet about Birdbrain (now "James Wilkinson Sword" LOL):
"He's just desperate to be noticed. Any attention will do, no matter how
negative it may be."
MID:

--
asking Birdbrain:
"What, were you dropped on your head as a child?"
MID:

--
Christie addressing endlessly driveling Birdbrain Macaw (now "James
Wilkinson" LOL):
"What are you resurrecting that old post of mine for? It's from last
month some time. You're like a dog who's just dug up an old bone they
hid in the garden until they were ready to have another go at it."
MID:

--
Mr Pounder's fitting description of Birdbrain Macaw:
"You are a well known fool, a tosser, a pillock, a stupid unemployable
sponging failure who will always live alone and will die alone. You will not
be missed."
MID:

--
Richard to pathetic ****** Hucker:
"You haven't bred?
Only useful thing you've done in your pathetic existence."
MID:

--
about Birdbrain (now "James Wilkinson" LOL):
""not the sharpest knife in the drawer"'s parents sure made a serious
mistake having him born alive -- A total waste of oxygen, food, space,
and bandwidth."
MID:

--
Mr Pounder exposing sociopathic Birdbrain:
"You will always be a lonely sociopath living in a ******** with no hot
running water with loads of stinking cats and a few parrots."
MID:

--
francis about Birdbrain (now "James Wilkinson" LOL):
"He seems to have a reputation as someone of limited intelligence"
MID:

--
Peter Moylan about Birdbrain (now "James Wilkinson" LOL):
"If people like JWS didn't exist, we would have to find some other way to
explain the concept of "invincible ignorance"."
MID:

--
Lewis about nym-shifting Birdbrain:
"Typical narcissist troll, thinks his **** is so grand he has the right to
try to force it on everyone."
MID:

Commander Kinsey wrote

Why do LEDs generate heat?

Because not all the electricity used is turned into light.

I want a technical answer not "because they're inefficient".
And will we ever make them more efficient?

Very likely with the higher powered leds.

On Fri, 4 Oct 2019 03:09:32 +1000, cantankerous trolling geezer Rodent
Speed, the auto-contradicting senile sociopath, blabbered, again:


I want a technical answer not "because they're inefficient".
And will we ever make them more efficient?

Very likely with the higher powered leds.

You two idiots had better wonder whether they will ever find a cure for
psychopathy and sociopathy which you deranged idiots keep exhibiting here!

--
Website (from 2007) dedicated to the 85-year-old trolling senile
cretin from Oz:
https://www.pcreview.co.uk/threads/r...d-faq.2973853/

On 03/10/2019 14:29, Commander Kinsey wrote:
Why do LEDs generate heat? I want a technical answer not "because
they're inefficient". And will we ever make them more efficient?
Besides the inefficiencies in the LED itself which other posters have
covered, LED lamps have some current regulation or power supply built-in
which will not be 100% efficient and thus generates heat.

On Thu, 03 Oct 2019 19:29:42 +0100, Robert wrote:

On 03/10/2019 14:29, Commander Kinsey wrote:
Why do LEDs generate heat? I want a technical answer not "because
they're inefficient". And will we ever make them more efficient?
Besides the inefficiencies in the LED itself which other posters have
covered, LED lamps have some current regulation or power supply built-in
which will not be 100% efficient and thus generates heat.

True, but it's the LEDs themselves that are the warmest, and also the most susceptible to heat.

"Commander Kinsey" wrote in message
news
On Thu, 03 Oct 2019 19:29:42 +0100, Robert wrote:

On 03/10/2019 14:29, Commander Kinsey wrote:
Why do LEDs generate heat? I want a technical answer not "because
they're inefficient". And will we ever make them more efficient?
Besides the inefficiencies in the LED itself which other posters have
covered, LED lamps have some current regulation or power supply built-in
which will not be 100% efficient and thus generates heat.

True, but it's the LEDs themselves that are the warmest, and also the most
susceptible to heat.

But if you feel a Philips Hue bulb which is the size of an old tungsten 100W
bulb, the part that gives off light (presumably where the LEDs are) is cool.
It is the neck, near the fitting, which gets hot - and I presume that's
where the PSU is.

Likewise for GU10 bulbs (Philips Hue or ordinary non-dimmable LED) the front
and conical sides don't get hot, whereas the neck near the fitting gets hot.

"NY" wrote in message
...
"Commander Kinsey" wrote in message
news
On Thu, 03 Oct 2019 19:29:42 +0100, Robert
wrote:

On 03/10/2019 14:29, Commander Kinsey wrote:
Why do LEDs generate heat? I want a technical answer not "because
they're inefficient". And will we ever make them more efficient?
Besides the inefficiencies in the LED itself which other posters have
covered, LED lamps have some current regulation or power supply built-in
which will not be 100% efficient and thus generates heat.

True, but it's the LEDs themselves that are the warmest, and also the
most susceptible to heat.

But if you feel a Philips Hue bulb which is the size of an old tungsten
100W bulb, the part that gives off light (presumably where the LEDs are)
is cool.

Mine isnt, its warmer than me.

It is the neck, near the fitting, which gets hot - and I presume that's
where the PSU is.

Likewise for GU10 bulbs (Philips Hue or ordinary non-dimmable LED) the
front and conical sides don't get hot, whereas the neck near the fitting
gets hot.

On Fri, 4 Oct 2019 05:12:47 +1000, cantankerous trolling geezer Rodent
Speed, the auto-contradicting senile sociopath, blabbered, again:


But if you feel a Philips Hue bulb which is the size of an old tungsten
100W bulb, the part that gives off light (presumably where the LEDs are)
is cool.

Mine isnt, its warmer than me.

LOL! Auto-contradicting senile idiot! Let's all hope that you'll SOON reach
room temperature!

--
Sqwertz to Rot Speed:
"This is just a hunch, but I'm betting you're kinda an argumentative
asshole.
MID: